Cimarron Twins: 44Magnum and 10MM

[@richd5025]

I've been wanting a 10mm. Glad there is a single action revolver in 10mm.

[@jaydenton6405]

I think either one would be great hunting revolver. The 44 mag will always be my favorite I think

[@gscop1683]

Don’t have much use for the 10mm. Live the 44 mag. Have a Henry 44 mag that matches up with my Redhawk !

[@bdr32965]

I have a 10mm Glock 20, don't be too quick to underestimate 10mm it is still one hell of a beast of a round

[@varanid9]

I never thought about 10mm vs 44 mag. Thanks for this.

[@bdr32965]

Have been doing some research into the Bad Boy and am wanting to get one of those 44 mags. I also own a 10mm Glock 20 and am a real big fan of the caliber, wasn't aware of the fact that Cimmaron made a 10mm Bad Boy until today, but now I am definitely wanting a Bad Boy chambered in both calibers.

[@blackbird2056]

Since I already have the 10mm, I would take the 44 magnum all day ! Keep the outstanding videos coming. Semper Fi

[@Dayattherange]

GreyGhost every Marine needs to have a 44Magnum 😁 And this is the right one. Semper Fi brother.

[@ewetho]

@@Dayattherange no Marine should stop at one. One is None, two is one, and 3 is a party!

[@HansBelphegor]

​​@@ewetho why im buying 2 10mm saa revolvers, i already have a 9mm one

[@atumre4705]

Those are BAD AZZ! Nice presentation.

[@danielkleinheksel8853]

Nice weapons! Perfect for the high country here in Colorado.

[@joerandella2526]

Amazing guns/rounds Happy 4th from England

[@gscop1683]

Uberti makes great revolvers. I have a Cimarron replica Colt Army in 45 long colt that is fantastic !

[@roycesjourney37]

Dude, I love 10mm. However, I'm not a fan of an auto rimmed cartridge in revolver. 44 mag is one of, if not, my favorite calibers. So versatile. I have a Super Redhawk, but I really want a Bad Boy as well.

[@wadelandeche8632]

Very cool set of pistolas! Good shooters too!

[@Dayattherange]

The 10MM was so much easier to shoot than the 44mag. Considering it traversed 32in of ballistics gel I think it would get it done in just about any situation.

[@JamesSmith-to7le]

Outstanding .

[@anthonygalliart1789]

Loved the video. Great job muchacho. Try out s Taylor's & Company Cattleman in .44 mag. Made at the same factory as the Bad Boys but with a 6" royal blue finish and A grade Italian walnut stocks. Not an adjustable sight model like the Bad Boys but with fixed sights I was able to hit soda cans at 100 feet with full power .44 Mag Geco 240 Gr JSP factory ammo all day long. This should make a great trail gun in bear country. Loved the Bad Boys. God bless

[@bertkilborne6464]

I like that the cylinder on the .44 is countersunk I also really like that the topstrap is sculpted a bit unlike the rectangular cross section of the Ruger Blackhawks - Very pretty ! I have a 5-1/2" Ruger Super Blackhawk in .41 mag, and I wish it looked as pretty as the Bad Boy But my cylinder is about 1/10" longer than SAAMI spec length for the .41 and it's possible to make warm handloads that push a 210 gr jacketed bullet at 1500 fps So I'm only *kind of* envious.

[@Dayattherange]

You will be glad to know the cylinders here are a bit longer for larger freedom pills :) I have only tried 265gr in them thus far.

[@bertkilborne6464]

I do have a Uberti SA revolver chambered in .357, which I recently purchased. I started getting a lot of 1873 reproduction guns showing up on my YT feed following the Alec Baldwin incident, and your channel was one. The Bad Boy is a *very attractive gun* - I wqas seeing that Ted Nugent was on the design team for it, which might explain a few things, and how it outdoes the Ruger SA revolvers, in fit finish categories. You could do an entire video on the differences between the popular Ruger Super Blackhawk revolvers and the Bad Boy.

[@timbarton6145]

That was great! I sure would like to see them go up against the Ruger single actions of the same caliber (hint - hint) Thanks Revolver Guy!

[@Dayattherange]

Hint received and already in the making 😀 It was to hot to finish the video out but I have about half of it done.

[@AZTLANSOLDIER13]

I own several Uberti firearms. I love them all. But the quality of the pistols compared to my Ruger Super blackhawk is significant. Hold both in your hands for just a couple seconds and you feel the difference. The weight, the play in the cylinder, the feel of the hammer, the finish, the trigger, everything. Ruger doesn't always get respect for silly reasons but the quality of their revolvers is outstanding

[@bongdudugenio9947]

44 is vicious and 10 is benign ill go with lenient for a quick follow-up shot!

[@evocati6523]

Fantastic accuracy

[@halcobb1627]

great enthusiasm! enjoying your videos.

[@jasonkerr7040]

You sir have earned a subscriber

[@MrThomass281]

Love the video. How does the Bad Boy compare to the Ruger Blackhawk? Those 8 inch barrels look great in hand. Great shooting

[@Dayattherange]

That video is in the works a side by side comparison of the Ruger BlackHawk in 10MM. Hope to get it done soon.

[@matthewtalich9989]

I think a hunting video with the 44 mag would be awesome. I feel a scope may ruin the guns good looks and appeal of that gun but ultimately it's up to you. For hunting that Sig Sauer v-crown load may do well but I prefer the classic 240 grain semi jacketed hollow point loads from Remington's HTP line in the green and yellow box. I've heard good things about federals furnishment of these old school loads under there American eagle line as-well.

[@shaunsian4784]

Have you had any issues or damage to the Cimarron Bad Boy in 10mm after shooting the Buffalo Boe 10mm through it? Also have you tried to fire Underwodd 10mm out of it?

[@Dayattherange]

so far only Buffalo Bore has been used outside of my own 10MM loads and the Cimarron is eating anything I have fed it and no issues.

[@shaunsian4784]

@@Dayattherange That's awesome! I'm thinking of getting the Cimarron Bad Boy 10mm myself for deer hunting. Gotta love 10mm my favorite handgun caliber

[@mattbrown9484]

Did you put the optic on the 44 Mag?

[@doug3805]

Love it, thanks for the video!

[@DanielFrankHoffman]

Great review!

[@Handgunslinger]

Do you have any Longshot powder? I think your velocity would be higher if you worked up a load for the 10mm.

[@Dayattherange]

I am a baby when it comes to my revolvers. I try to stick to Flake and stick powders for my revolvers to try and avoid top strap cutting. I have seen 2K rounds of Longshot in a revolver and S&W had to replace the frame due to top strap cutting in high pressure cartridges same as Lilgun. I do use Ball for low pressure loads and no issues.

[@anselanderson2771]

Great video man! Iv been looking into the 44mag for a while now, how much did it cost you? Thanks and have a great day!

[@ewetho]

Ya did not drop the one shot low with the 10.., that was the high shot from before! Nice shootin'!

[@wesleyhalpern184]

44 mag definitely smokes 10mm but 10 ammo is much more plentiful and affordable than 44. Still getting .357 mag power or more from the 10mm, so not too bad.

[@thinktwice8860]

Great vid man! Thanks for showing these great calibers and pistols on your channel! I just ordered some new ammo for my 10mm 1911 and 44 mag Redhawk this morning; so it was awesome seeing your shooting these two fine revolvers this morning! I will begin reloading for these handguns and my .308 bolt soon, but have to learn more first. Do you have any ideas where I should start? Thanks again for what you do sir!

[@Dayattherange]

Mike do you have a press already?

[@thinktwice8860]

Dayattherange No sir. All I have is some 44 mag, and 44 spec. casings.

[@Dayattherange]

@@thinktwice8860 Lee 4 hole classic turret is very reasonable. Most important get a load book or a manual as some call it.

[@thinktwice8860]

Dayattherange Thanks! Do you feel it’s better to start buying components rather than getting half of it in a kit?

[@Dayattherange]

@@thinktwice8860 Buy the kit and keep your factory brass and start there. If you find it enjoyable, relaxing and Safe like myself then you can start with components. Find your reloading community locally and you will be surprised how much they will help you and give you some components to assist. If you have no local reloading community "The ReloadersNetwork" is the best reloading community online, in my humble opinion.

[@jamespugh]

Awsome video man . Told come over from scoutch reloading. Two Awsome revolvers. The 10mm is very hard to find know. Been looking around . I seen chute got one in chuck had one on Alaskan Ballistics. Their hard find. Kind of a shame it don't do 40s&w. 44 mag I have seen and 357 mag also

[@Dayattherange]

Chuke has bit of a different animal he has a uberti catleman I think. Ported round barrel but very nice.

[@jamespugh]

@@Dayattherange thank for reminding me its cattlemen. Hard find 10mm in uberit line up know. Gun shop 3hrs from me in ohio got 45lc and 357mags. 44mag back ordered local gunshop watch his inventory. I just got handloading. Picked good bit of manuals up. Also shooter Bible to handloading. Alos just got a lee handpress. Bought out some birthday money i got as gift to my self

[@stevensheffield2002]

Would love a video mounting an optic.

[@Handgunslinger]

Have you tried Alliant BE-86? In the 9 Mak it delivers velocities that are near 9mm.

[@HansBelphegor]

Elaborate

[@Handgunslinger]

Look on Alliant's on line load data; they show a BE-86 load under a 90gr Gold Dot at over 1,100 FPS.@@HansBelphegor

[@jamesfogus8362]

I do enjoy your video's and than you for the 45 colt rifle. When were you in the marines?

[@ewetho]

Headspaces on mouth of the case not thevrim or it would work in 40S&W. But both are beautiful.

[@Dayattherange]

Correct was excited

[@JacobGreenberg78]

What is going on with the 725 ES on the SIG .44 mag velocities? Is that chrono error or real?

[@Dayattherange]

Wasn't that big of ES but look at the end of the video you will see stick powder on the gel block. That tells me that this powder was not being burned all the way, so the powder would have caused false readings. Someone gave me some A5744 and when I found out it could be used for 44Mag I decided to try it.

[@billybobsnorton9196]

These pistols have to be stronger than the old Colt to handle the loads that you are playing with. These seem to be Super Blackhawk equivalent. I reload and shoot a Super Blackhawk. I live in Yellowstone county MT. I carry the Ruger while out hiking in the Beartooth mountains. My heavy load is a 300gr Sierra fpsp at about 1300fps. I was impressed with the 10mm out of this pistol. I think I would prefer the 10mm in simi though. I believe you could get better performance w/o the barrel cylinder gap. I don't know if the difference would even be noticeable. These look like well made pistols but I'm not sure you can call them replicas if they are this much stronger than the Colt Old Army, which I believe may still be in production, not sure about that though.

[@TheBiggBert]

You the man!!!

[@JamesSmith-to7le]

44 mag . Then you can get a 44 mag carabine to go with it . Nice combination .

[@HansBelphegor]

You can get a 10mm carbine too

[@jimkubitza3820]

For me there is no decision ... 44 mag all the way.

[@Dayattherange]

Oh ye of little faith -- until you wrap your mits around the 10MM hehehhehe

[@ewetho]

Get both you will be happier! Got a 610 and 629 (even a 627) and love them all for different reasons.. just fun.

[@Leo-hy3zy]

10 mil, until i can get my hands on the 44.

[@shaunsian4784]

10mm Bad Boy all the way

[@joeltowle2737]

The 10mm is an awesome cartridge. A 357mag on vitamins or JR 41mag?! Lol 41mag???! JK I'd probably go with the 44mag because getting ammo is a little easier, plus you can shoot 44 spl. The 44mag has more bullet weights for factory and hand loading.

[@cutchya]

Hmmm , the slower lighter .40 cal , or the faster heavier .43 cal ??? No brainer . Plus the 44 can use 44 special. But 10 is cool too. Get both .

[@peteshour768]

Initially, the 10mm Bad Boy revolver is tempting to buy. I just don't trust Uberti.

[@Dayattherange]

Tell us more Pete

[@TracyLoop]

Ether one would stop a Grizz.

[@M4A3]

9mm test? :-D

[@Dayattherange]

Its coming was wanting more clear ballistics gel but I might just have to use my old. Wanted a really clear view.