Citroen c3 Picasso suspension top mount

Changing top strut mounting on Citroen c3 Picasso

[@stefanocimino8759]

Grazie per il video ho riparato la mia Picasso uguale come te 👍👍👍

[@TheSkyedoggy]

Mate your a star for posting this .The very problem i have .Thank you so much dude.

[@michelod.i.y.5202]

Kind words, many thanks

[@wendywhales2310]

Well Done Young Man.

[@kaytlancoates6816]

That’s made me feel like I don’t want to try the headache maker! Lol still gonna give it a go 💪

[@michelod.i.y.5202]

You'll be fine give it a go, thanks for watching.

[@robertwilliams1222]

Great

[@nevillehunt7566]

Just had mine done and yes it was the nearside.. The garage changed mine and also changed the strut .. Changing the strut is recommended by Citroen .. So for those that get their top mounts replaced by a garage they will probably get fitted a new strut as a matter of course.. I paid a little less than the Halfords price mentioned in a previous comment.. A new strut with mounts was £88 ..

[@michelod.i.y.5202]

Must be a weekness in these vehicles, thanks for watching.

[@MrJnr786]

Would have been nice to hear the sound of the noise before you changed it

[@Aeroceller]

Cheers mate, gonna start this project today! All I've got is a broken spring on the passenger side but I though that if I'm gonna go through the trouble might as well replace all of the fronts wearing bits. Seems like a pain in the ass but at least I've some reference now.

[@michelod.i.y.5202]

You've got the right idea, like surgery once your in there you may as well fix up everything. Thanks for taking the time view my video. I've got thousands of views on my channel but few like and subscriptions, if you haven't already I would very grateful and appreciative if you were able to hit the thumbs up and subscribe. Thanks

[@hammerheadmusicman]

Great video. Had a broken spring on this side. JUST about managed to get the strut out, and rebuild. But, there just isn't enough clearance to pull the boot down far enough, to get the strut back in to the knuckle!! Any tips?

[@michelod.i.y.5202]

Access on modern vehicles is terrible I find, I think your best bet is the use of a good quality pry bar, thanks for watching

[@2710miki]

Well done and thanks a lot... I tried to do it but I can't take of the damper from the hub... Any advice please? 🙏

[@michelod.i.y.5202]

Have you undone the tracked rod and antiroll bar link? There's a nut at the bottom of the strut to. You have to pull the whole assembly down while lifting the strut up. Alternatively undo the whole hub assembly and remove it careful you don't remove the gearbox side, but it's not to much of an issue to top it up and only about half a cup will come out. Good luck hope you succeed.

[@michelod.i.y.5202]

Another suggestion keep the strut bolted in at the top undo the bolt at the bottom of the strut and with a hammer tap the hub assembly down to loosen it from the hub

[@thejamesgaragemalta]

Hi thank you for your information I like to know how to take out the wind screen plastic grill that is just under the wipers arms Thank you in advance

[@michelod.i.y.5202]

Just going from memory as I no longer have the vehicle, once the bonnet seal has been removed you have to be a little forceful and pull it down in the same direction as the windscreen. Good luck and thanks for watching.

[@shanekneeshaw3483]

Just had mine done really hard to find the problem beforehand

[@michelod.i.y.5202]

Was yours on the left hand side too? I read somewhere it may be caused as a result of the fact the car is originally designed as a left hand drive and then adapted. Glad you got it sorted.

[@RicardoCerveraBlanco]

Hi man and thanks for the video. Do you remember if the suspension strut is adjustable?, I gonna buy one of those c3 picasso and want to lift it up a bit and make the whole suspension harder so it doesn't rock as much while turning.

[@michelod.i.y.5202]

Hi, the standard suspension isn't adjustable .I suspected it can be done but at some extra expense. Thanks for tuning in.

[@RicardoCerveraBlanco]

@@michelod.i.y.5202 Thanks, I will inspect it well before anything more likely getting new suspension all together as I want to lift it up a bit too. Thanks.

[@michelod.i.y.5202]

@@RicardoCerveraBlanco good luck with the work hope it all goes well.

[@RicardoCerveraBlanco]

@@michelod.i.y.5202 Thanks.

[@clivethompson3693]

How did you position the top bush in the elongated chases hole?

[@michelod.i.y.5202]

Not sure if I'm answering your question correctly, there is a little hole in the top (about 6mm) mount I aligned white the one in the mount by using a drill bit. Then tightened it all up.

[@shanebrookes1878]

hi what sort of noise did you get from, mines bad on left when i turn left, cheers

[@michelod.i.y.5202]

Had a thudding sort of sound difficult to explain, on turns and going over uneven surfaces. Thanks for watching.

[@mhoward181]

PLEASE HELP. Iv had the same problem on my 2010 Model. I Changed front suspension at 130,000 miles and then got a knocking noise. I eventually gave up and got a new c3 Picasso 2014 plate. but now I have the same issue. Just 50,000 on clock and a spring broke. I changed both front springs with mounts due to last car issues. The garage assured me the springs were close to OEM. After a few weeks I have knocking noice from front n/s. Garage today got car on ramp and said they cannot find anything wrong. What do I do

[@michelod.i.y.5202]

I have found parts are important, oem parts can make a difference but mainly make sure every nut and bolt is properly torqued up, double check antiroll bar link to. Apparently a lot of it could be caused because the car is designed as a left hand drive and converted to right hand for other markets. I no longer have my Citroen, so trying to refresh my memory, good luck with the issue.

[@paulwoods593]

Hi can you tell me if the top mount nut is supposed to be loose so it can be turned by hand thanks

[@michelod.i.y.5202]

From my memory it should be a nylon locking nut, done up tight, shouldn't be any movement

[@paulwoods593]

@@michelod.i.y.5202 mines turning freely by hand I've just had shock absorber fitted

[@paulwoods593]

@@michelod.i.y.5202 so can turn it by hand I have citroen c3 picasso 2010 model

[@brettrawson2198]

Vid shows every step except replacing a top mount!

[@michelod.i.y.5202]

Many thanks for watching, it's been a while since I worked on the citroen, but I did do another video which may help, here is the link, kzbin.info/www/bejne/hIXChKWhlttjnJIsi=QhVbmhZTPExMqHJ7

[@wakko866]

Pitty you did not film the getting out part as that's what would have been interesting

[@michelod.i.y.5202]

Apologies, my filming skills need some brushing up, I think I've improved, but only slightly 😊