Citroen P1446 Particle Filter Additive Too Low FIXED!! Using Autel Step By Step

Citroen P1446 Particle Filter Additive Too Low FIXED!! Using Autel Step By Step

[@drumrunner72]

I've got the same error on my Peugeot 3008 1.6HDI BUT when we checked the level the bag was full. No codes on the scanner but the error still comes up every time I start up.

[@sadiagnostics]

@@drumrunner72 you may have a faulty sensor or you require a reset with a diagnostic. Best option would be to reset it first as that’s cheaper option…..

[@karlclegg9810]

i get adhesive low particle filter risk of blocking and my turbo just went but its saying the adhesive is at 52% full any idea why its asking me to fill that up?

[@sadiagnostics]

@@karlclegg9810 sounds like faulty sensor not reading inside the tank correctly. I could be wrong but that’s what I think

[@homeistheearth]

Funny, i get a p1445 that it comes up with same message on cars display, it is the amount of additive that can go through particle filter is at max. But still same message. I also have the p1351 is that a common thing with these cars?

[@sadiagnostics]

Yes it is Citroen and peugot same stuff mate

[@ESSA20]

hey, excellent video, could you recommend some obs 2 Autel scanners that do the reset, nothing to expensive tho and too too cheap that I miss out important features cheers.

[@sadiagnostics]

Hi yes the cheapest Autel machine does it that’s up for £500 or Diagbox which is only £50 on eBay and you can download it onto your laptop and you can do a lot more than the Autel on Citroen and Peugeot.

[@kevinleberger2513]

I reolaced the whole pouch 10k miles ago due to it being split and now got this messagz in last two days. Hard to believe as pouch was nearlly 500 quid. The garage at the time told me only Citroen produced it😢

[@paulward4417]

Would it be dangerous to drive a car with this this error???

[@sadiagnostics]

No really, it will just go into limp mode that’s about it but it’s best to add it as it works to whether with the engine.

[@spart361]

@@sadiagnostics I have added the additive but i can't clear the error, will it still pump the additive ?

[@sadiagnostics]

@@spart361 I’m unsure if a full scan and clear will do that unless your really lucky but you have to do the same procedure as I have done to ensure it fully works

[@paulhenderson9585]

I’ve drove about with this error for 5 years no problem

[@mkabschleppdienst2732]

@@paulhenderson9585 really

[@usmanaziz6715]

Hiya I can't find the dpf sensor on 2015 c4

[@sadiagnostics]

Try ringing your dealer and giving them your reg as they can then send you diagrams of your car…

[@jameshailes9708]

This is really interesting because I'm looking to see where I top this fluid up? I have the same warning. Any tips as to where to find the tank to top up please?

[@sadiagnostics]

Hi James, as far as I know they are based near the right rear wheel. All Citroen and Peugeot have it there but will depend on the year.

[@paulmanser8941]

What model of Autel are you using?

[@sadiagnostics]

Maxisys Ms908s pro

[@chubbychequer1512]

Where are you reading the fault? My autel doesn't have the special function to do the reset

[@sadiagnostics]

It maybe because yours is a basic Autel machine. To be able to go into these settings, then you’ll need something more advance and this usually costs you roughly £1200+

[@chubbychequer1512]

Yes iv set up on my own think I need a better scanner as this one is too basic, will yours do the oil dilution reset for the dpf, mine wont

[@sadiagnostics]

@@chubbychequer1512 yes this will do literally everything that the manufactures are capable of doing.

[@chubbychequer1512]

@@sadiagnostics will it code in keys. Thanks