Class 1 VS4-10 vs VS4-10 Pro - Kick Rocks - Vlog

It felt good to hit the rocks on a cold day in June! Great to get the hardbody Toyota out into nature finally.
Portal Rear Install: • Rear Only Portal Axle ...
VS4-10 Pro
Tekin RX4: bit.ly/2zL4LcJ
Tekin ROC412 3100KV: bit.ly/2zFWmrb
Tekin T360 Servo: bit.ly/36JGL5X
Tekin T180 Servo: bit.ly/2ARuPTR
Vanquish Machete V2: bit.ly/2Mf71eW
Vanquish Dredger Beadlocks: bit.ly/2Mf71eW
Proline 4.75 1.9 Krawlers (G8): bit.ly/2XOig4A
VFD Hurtz Dig: bit.ly/3csHauB
Futaba 4PM: bit.ly/2TY8B9o
Soots Scale Painting: bit.ly/2XxX0QH
VS4-10 Class 1
Vanquish VS4-10 Chassis Kit: bit.ly/3fa9vYt
Vanquish VFD Transmission Kit: bit.ly/2Yg29Ma
Vanquish D44 Front Axle Housing (clear): bit.ly/3dQLTHU
Vanquish D44 Rear Axle Housing (clear): bit.ly/37gMPD7
21% Overdrive VFD Gear Set: bit.ly/2MohRzr
Castle Micro X: bit.ly/3dSvm6k
Holmes Puller Pro 540 2700KV: bit.ly/3eEkSaD
PST-200 Servo Winch: bit.ly/3cGNz5L

[@alexcalley1928]

Holy crap. He actually uses his trucks from time to time. I just thought he builds them, puts them on a shelf, and waits for someone to buy them. Also the 1 silver screw in the wheel is very Formula D. They require have an identifying mark on the wheels to see when they lock up the wheels.

[@comeandtakeit5709]

Just watching this truck move you can clearly see it’s capabilities are top level.

[@00godlovesus]

Can I tell these guys just shut up and appreciate the hard work the filming and the editing thank you very much:)

[@toddbertram6556]

People notice things bud and that is what pushes Josh's builds to be what they are. I'm sure Josh has learned and taught a lot based on his viewers.

[@00godlovesus]

@@toddbertram6556 thanks Todd it's an inside joke for Josh he knows I adore him:)

[@BANTAM53]

Need these rocks back east usa!! Great vid Josh.

[@shaunshaunk9297]

Nice video. I took a few of my crawlers out the other day for a hike also . And snapped a CVD but was still fun!! Love the trucks!!

[@michaelhoyle3266]

Every time I watch your videos I am envious of all the great terrain you have in Calif. Fun to see your builds in action.

[@michaelburton831]

Josh.... that video was interesting.... i didnt see any RC trucks or any crawling at all... all i saw was a very very patient and understanding wife who must really love you and one who probably makes all the compromise. You are lucky.

[@HarleyDesignsInc]

She is a patient and understanding soul for sure! One of them midwest women!

[@bradcowart5044]

Beautiful area you guys visited!

[@nicholasbarber4193]

I love that you made your wife your mule. lol Although, the Carry-All RC backpacks are so comfortable and distribute the weight so well, that you can't even really tell you're carrying a truck. I figured you turned your radio off and that's why it was beeping. lol Darn data logging! Ha!

[@jordanabegg7926]

Don't use the camera to save the truck. 🤣🤣🤣 Thank you for leaving that bit of footage in there. Would be fun to have a couple bloopers at the end of these videos.

[@RCBadasserie]

Soot's killed that body! Awesome!

[@jeffreypursley1914]

Got it all goin’ on that day brother. Could have not asked for a better day!

[@dawsonbossi689]

Nice, love the video with the rundown on both rigs! I have been up there but never crawled there. Seems like an awesome place! Now I need to go up there... when its not in the 40s😄👍

[@moosejawrc]

Nice spot! Thinking of hitting Highway 50 and park, hike at the Pyramid Creek TrailHead / Twin Bridges location. I think dig is next on my vs4-10. Looks fun!

[@HarleyDesignsInc]

I don’t think I’m familiar with that area, I’ll have to google it.

[@chuckgrc3011]

Man that 410 is dialed in

[@leestewart5424]

Those are some nice builds they both perform Great the portal on the Pro is an Excellent idea thanks for the video

[@Evan_Moore61]

Since you sold the Woodsrunner, I’d like to see a new one utilizing a Vanquish body for the panels. It would be fitting seeing as how the 1:1 Woodsrunner is a Scout.

[@travisgilmore2127]

You are right, the terrain out there is awesome. Almost makes me wish I lived in California, I said almost. That class 1 rig is awesome. For a tiny tire truck that thing is a goat.

[@CarminesRCTipsandTricks]

I always said that I would live in California..... If it WASN'T in California!!! 😖😜 Actually did live there until 1981 - but it was mainly on Air Force Bases. I was 17 in 81. Told that the whole State isn't remotely the same since then, and we got out in the nick of time! Is pretty though.

[@flipcivicvtec]

Wow dude your rigs are awesome!

[@sprather84]

Dope vid Josh good to see you still know how to drive them and you actually weren't trash.. way to go 😂👍🏻😎👊🏼

[@CarminesRCTipsandTricks]

Fantastic location Josh and Nicole!!! She's one of the only Women that you could call a "Pack Mule", and still have a place to sleep that night!!! 😜 The Crawlers in G8 compound... SHOCKING!! Couple of times you pulled that Rig up a Rock - with freewheeling DIG engaged!! 😲😲😎😁 Truly impressive. The Class 1 did well too. Although I wouldn't use my CAMERA to break its fall!!! 😲😜😂 Looked like great fun. Carmine ✈🚂🚙

[@jvuorisa71]

That C1 4runner sure is 👌

[@mattgallizioli5978]

Watched all the national videos would be awesome to see them all finished ! New to crawling switched over after years off of racing 1/8 buggies. Really enjoy your channel.

[@AZ_JTR]

Great video, good to see you get out. Can’t wait until those Bronze Machete’s hit the site.

[@andyrichey1192]

Yeah what a awesome place for crawling.!! Sweet looking class one truck, but the pro is my favorite !! Just got to of my friends to buy the pro. They've been watching me for months driving mine, they were really in press, getting where I do need another body though !! Thousands of scratches everywhere, that don't bother me, but I do have one crack at the drivers side round the Head light. But going to take me a little while since I just got back to work . Appreciate you sharing Josh. Really love the roll bar on the pro. I'll be watching for more.

[@dep1001]

Great looking rigs! And what an awesome location to drive them.

[@dominiqueleblanc2193]

Nice vid. Nice trucks. That little 4runner looks amazing!

[@juanrico9296]

Nice videos, as usual. Appreciate all the work and information. Any ideas of platform for the next budget build/when it will happen? (Sorry if this has been covered/discussed already...)

[@HarleyDesignsInc]

No budget build has been decided yet but a new Monthly Mayhem has been set!

[@MikelangeloPhoto]

that's Soots' paint job?! it's awesome!!

[@sir2honda]

You needa do a live stream with SBG and have him show you how to weather that 4Runner

[@georgejones6144]

You really can drive and make it look easy!

[@Hohopapa84]

The car goes well, but you have excellent control. Good watching 😁👍👍

[@thomasgross8289]

That class 0 is surprisingly capable rig!

[@markvasseur961]

A Beautiful area, with your beautiful wife in what seems like some great weather and running the rc's.....what a day!

[@4GregF]

Your wife looked bored. Take a second remote so she can drive one of the vehicles next time. His and her crawling might be fun!

[@CarminesRCTipsandTricks]

She always looks that way! 😜 Nicole's actually a sweetheart - just very low key.

[@jessicalatex2539]

A MOVIE with RC CARS in it.. MALCOLM.. Its an aussie film. From 1980's..

[@dennisanstadt1039]

Great video

[@nash3913]

Great crawl'n spot, thanks for sharing. N ya there's plenty of time b4 nationals ta get new trucks built. Look'n forward to the vids of you bust'n ass try'n ta get em done in time.🤣🤪

[@MrKongpvu]

Awesome dialed trucks! Thanks for the set up info! Has it already been covered...is the VFD kit a straight drop in to the Origin? I don't want to get rid of my Origin.

[@17madracki17]

It's 2020 and we still have gear on gear noise. I'd think belt and pulley would be more popular by now. It's the only thing that bugs be about watching your videos. Thanks for sharing. Awesome to see you out finally.

[@stevelangley246]

Videos like this you did last July are the reason I bought a Pro. Nice! Question: how/when do you use the neutral rear in the dig function? Just got mine and I'm learning it.

[@HarleyDesignsInc]

It is hard to explain the best times to use it, but it’s something I’ve found useful in certain climbs or off camber turns where I don’t want the rear tires to wash out. When I’m driving and filming I only drive one handed so I use a 2 position switch for the dig as it is much easier to do one-handed.

[@roberth5370]

Did I miss something no scale news this week?

[@HarleyDesignsInc]

It posted yesterday at the same time as always. A bunch of people said they didn’t get a notification though. Very weird.

[@shaunshaunk9297]

I also did not get a notification for scale news. I saw it looking though KZbin last night .

[@kravenkrawlhobby5438]

$1200 for the 4Runner?? You did a great job building the little beast. Keep you VS4 10 pro and sell me the Runner!! Serious bro

[@HarleyDesignsInc]

Thanks for the offer, but I ended up selling it already. The asking price was a decent amount higher though :)

[@kravenkrawlhobby5438]

I would have still paid it, trying to work a deal out I usually start low and work from there. I knew $1200 was just a starting point and go from there. I will buy one of your rigs. Your builds are always so capable and class 1 is beautifully scaled.

[@CoachD386]

Good stuff family 💪🏾💯🚀🔥

[@toddbertram6556]

The trucks look great. I am curious though the cage work on the VS10 pro seems like it would scale up to about inch and a quarter to being which seems very thin, not thin but the OD would seem a bit small when scaled up. But your trucks always perform well and look good Bud

[@HarleyDesignsInc]

It’s 3/16” DOM for the main portions, which would scale to about 1-3/4” at 1:9 scale. The small braces are 1/8” which would be about 1-1/8”.

[@ruftime]

Todd, we have to work with the raw materials sizes we have......I wouldn’t obsess about that...... “scale” is mostly in the eye of the owner/critic or the SORRCA rule book. Ultimately it’s just fun😎

[@jarrettboston1]

What softness and type of crawler innovations foams are you running on the C1

[@theblackrsx]

great video

[@ricklewis950]

Can u add a link or some info on this painter???

[@roberth5370]

It's "soots" check him out on face book

[@HarleyDesignsInc]

I’ll add it in the description below.

[@ricklewis950]

Thanks guy's, i was able to give him a look. He has some nice work, i think he did his best 4 u though Harley 😄

[@Cannabis_Connoisseur]

Are your driving skills that good or was some of them shots 50 tries??? Driving looked top notch.

[@HarleyDesignsInc]

Most of that was just walking and driving, I didn’t really try too many lines multiple times. I’m pretty familiar with how these trucks drive so my confidence in them is usually high. But I drive one handed and film with the other so it’s always a bit tricky.

[@rcpatinaguyllc2655]

Did I hear PATINA?!!! Lol

[@elwin309]

what do you want for the yota or the pro

[@HarleyDesignsInc]

I have the Toyota listed on my website in the for sale section with details. Harleydesigns.com

[@travisloesher3736]

How much you seeling the truck for.

[@HarleyDesignsInc]

I had it listed for $2k but it sold yesterday.

[@hossrc420]

Do you have discord so we can chat, swap ideas and get help when needed to help find parts.

[@jacobzirkle9153]

What front bumper is on the class one?

[@HarleyDesignsInc]

I built it.

[@dustinalexander982]

Just a curiosity question why do u do a portal rear and a straight front axle?

[@The_RC_Guru]

A good mix of low cog and clearance. You place your front tires where you want them and don’t have to worry as much about the rear axle snagging.

[@CarminesRCTipsandTricks]

..... Like he said in the Video.

[@acsubie]

Suspension setup On the pro?

[@HarleyDesignsInc]

All stock with 90wt shock oil.

[@markclausson564]

Why do all videos have to inject music I want to hear what the damn car Sounds like

[@PhoenixRCCrawler]

I know you’re new to this but you should turn on image stability on the camera. It’s too early for this shaky jake style video. 👍🏽🐒🇺🇸

[@matthewrustia4874]

Phoenix RC Crawler he ain’t new to this bruh

[@PhoenixRCCrawler]

Matthew Rustia no shit. That’s the joke ....bruh

[@mikep.9338]

@@PhoenixRCCrawler rofl

[@sprather84]

@@PhoenixRCCrawler 😂🤣😂🤣😂👊🏼😎

[@HarleyDesignsInc]

I’ve been so frustrated by the stupid gopro lately that I grabbed my DSLR this time. Then I realized why I like the gopro for my shaky Vlog footage!

[@channotpoling20]

Wife looks bored.