I've followed along with two of your videos so far, and you've saved my project both times. Thank you!
@egyedmarianna Жыл бұрын
Your tutorials are gold, keep it up!
@aearchitecture17803 жыл бұрын
Thanks. hope you all study efficiently
@Janeite4454 жыл бұрын
This tutorial was perfect for my Victorian porch I have to work on for class!
@andrearantes51716 жыл бұрын
Ah! Thank you! Most of the project I do, 90%, are remodel of Victorian houses. It has been very difficult to learn how to model a Victorian house since any Revit classes deals with modern Architecture. I wish I could show you the house I'm working right now. I have to start on the front elevation soon. I'll have to fake a lot of it. The fast pace of work and demands leave me little time to research and learn. Thank you for this video! Can you do one aspect of a Victorian house?
@joseedistio29746 жыл бұрын
Crack. You are the best hand revit I know.
@raindestiny32154 жыл бұрын
Thanks a lot ... your tutorials are the best
@elonelbaz58993 жыл бұрын
Thank yu for all the knowledge yu gave me with your videos and also with your simplicity of explainig things '' x Cheers
@radwanekallali77495 жыл бұрын
Thank you balkan from Algeria
@Nisha-to6ir3 жыл бұрын
your video helps me a lot. thank you
@alaasalam11022 жыл бұрын
that was amazing .... THANK YOU VERY MUCH ....
@wahidullahparwanayuqob39105 жыл бұрын
Since this video was the best ever I seen and I would like say ones again thanks for such a nice video
@LKLWARNERLKL4 жыл бұрын
Doug that is Savage !
@habiburrahman98763 жыл бұрын
Thanks for the amazing tutorial
@bioarquiteturapaisagem33463 жыл бұрын
Suas aulas são as mais didacticas. Thanks from Brasil!!!!
@wahidyuqob201610 ай бұрын
amazing Video. I hope you have more tutorial for Lumion as well.
@bassamhalboob75392 жыл бұрын
thank you , very great
@lgcarchitecture85063 ай бұрын
Very useful! Thank you very much. How can the balustrade be adapted for use on a staircase? I mean the balustrade at the top and bottom, so that it follows the angle of the slope.
@mohammedirshad57826 жыл бұрын
Superb explanation
@ທ້າວ.ອັດສະນີອ່ອນປະເສີດ Жыл бұрын
Thank you very much bro
@vijayrowdy70422 жыл бұрын
I really thank you sir
@curtneyjanebalagulan6366 жыл бұрын
wow this is pretty amazing
@georgekiadii454 жыл бұрын
Extremely awesome! Sir, please create a tutorial on the Baluster post and cap.
@gemmapromano11 ай бұрын
wow! thanks be to God
@haniyehazadi15912 жыл бұрын
😍😍Thank you, it was very useful♥️🦋♥️🦋
@SaiKumar-jf2pe6 жыл бұрын
Thanks for the video buddy.
@Leesynergy6 жыл бұрын
Beautiful. Thanks a lot.
@treveller66314 жыл бұрын
Leart english to watch your videos. They are really informative. Thanks.
@irinaivanovna63802 жыл бұрын
Bro that’s great , but do I have to always construct it from 3 parts? Can’t I just make it one fail and just load it.
@AHMADWAER6 жыл бұрын
really very good, thanks.
@A.shk92 жыл бұрын
You are the best :*
@rajkumarkolli62916 жыл бұрын
thank your for giving like this tutorial those are very helpfull
@tommarlin74783 жыл бұрын
Great tutorials
@nayakishfaq93 жыл бұрын
Amazing
@E.Jomer142 жыл бұрын
Amazing 🤣🤣 thank you
@alinanaaz67306 жыл бұрын
Thanks its so useful i am fan of ur,s
@මහී-සෙන්4 жыл бұрын
Thank You its nice
@h.younous32903 жыл бұрын
Thanks bro
@bekmurodergashev35712 жыл бұрын
EASY THANK YOU
@burhanulu20384 жыл бұрын
thank you you are amazing
@ARQ2022116 жыл бұрын
great! can you please make more railing type tutorials? because there are so few. types included. How about a wall railing. i have donwload a frew. but they dont adapt to stairs. or the structure that holds it dosent adapt well to the step. Thanks for your tutorials
@HungNguyen-nb3xb4 жыл бұрын
thanks you
@peterjreij95824 ай бұрын
How can put such similar railing on stairs? I tried to place on staircase but it didn't work.
@roxramos52894 жыл бұрын
Gracias!
@robperalta79405 жыл бұрын
great video
@wahidullahparwanayuqob39105 жыл бұрын
The best video
@arammuhamad25315 жыл бұрын
thank you very match
@sijinjohn66033 жыл бұрын
Awsome👍👍👍
@kokofrikos006 жыл бұрын
great and helpful video! i have a question..is it possible to cut in half one of the balusters when the railing is intersectioning with a wall?
@hamzazahid59222 жыл бұрын
top and bottom rails are are ended befor baluster. It can be seen in your video also at the end balluster is out of rails .. why?? what we should to parallel them
@pabitraswain83096 жыл бұрын
Superb..
@iftekharkhan88794 жыл бұрын
Hi Balkan how r u ,suppose between baluster I want to show glass also so how we can do this???
@chetan25773 жыл бұрын
great tutorial. need help. i have created custom shape baluster ( using revolve ) and set it on spiral stair. issue is baluster width changes after certain distance on and get normal width in some distance. how can i maintain baluster width.
@johnarchitect65106 жыл бұрын
Hi +Balkan Architect I am having some trouble completing the railing. I have followed all of your steps precisely, however when I go to draw the railing and hit the green "check" to finish I keep getting an error message. the message reads "Can't make classical baluster" Error 1 :id316816 - I was wondering if you or anyone else could shed some light on where I could possibly be going wrong. Thanks in advance
@onzkicg6 жыл бұрын
Amazing and efficient. By the way, in this video you did all profiles via Revit manually- in my work, all section profiles (shapes) are done in CAD, and we have library of those already. Can Revit read an import from CAD?
@dubaicouplevlogs82954 жыл бұрын
Hi thanks for your tutorial but im getting error and the baluster is not loading into the project. pls advice
@abdullahzuhdi27746 жыл бұрын
Sir may i know why u would like tobuse CM instead of using MM Metric..? Thanks just curious 👍
@iftekharkhan88794 жыл бұрын
Hi Balkan how r u ,I m a beginner can u please tell me what is the reason behind to draw a object below the reference plane and above the reference plane
@fouezdesign4 жыл бұрын
Amazing ...
@MAGNITO096 жыл бұрын
wow i really like all ur vdos !they r just awesome ....... sir can u just suggest me how to build cross buck railing in revit !
@alfredoemerencianaperez-vi76892 ай бұрын
What about classical panel baluster or classical steel baluster
@izamanaick4 жыл бұрын
what would you do if you had 2 slightly different 'columns' and needed them to alternate?
@yousefjarwan14133 жыл бұрын
GREAT ]
@brijeshparekh44426 жыл бұрын
Nice video
@zhandostulenbayev64315 жыл бұрын
рахмет
@GeorgeKing-rq8ef6 ай бұрын
How do I load my baluster in my regular drawing
@anniebatongbakal49743 жыл бұрын
hi, how to create gratings for trench using railing family? thanks
@a_bansal6 жыл бұрын
we need tutorial on classical elements such as parametric brackets and other details please...
@syedmalik84245 жыл бұрын
Thanks for railing video Please send more like video Door & window hot to Crete
@piyushdiyora64124 жыл бұрын
Hey there, Its giving me an error. Would you please help mw with the error An error occurred in family "Baluster final" and was automatically resolved, but may require review by the family creator. Error Information: "Can't create surface of revolution" Error Resolution: Delete Element(s)
@nour_n_dot4 жыл бұрын
You probably had a few unconnected lines/arcs/shapes. My revolve sketch and extrusion wouldn't join like he suggested so I zoomed in and saw that the base and the shape I sketched were a fraction of an inch apart. I aligned them and it allowed me to join them.
@reemkhaled70336 жыл бұрын
Thank you!! But how do I actually add this to my own project?
@CJ007-d9d4 ай бұрын
Sir what's short cut for geometric view sir(3:08) pls sir
@eapusoleil6 жыл бұрын
Great!!!
@baryotik67024 жыл бұрын
Hi, can you make a tutorial also how to do a classical grand staircase with wrought Iron railings?
@sahanurrahmansahan78463 жыл бұрын
How to change bluster materials?
@Lumeos196 жыл бұрын
Can you please please make a glass railing tutorial? I would be thankful!!!
@donnyreisch12263 жыл бұрын
Try it as a sweep. Set your profile to the thickness and height of the glass, then sweep for the railing. Set Material to glass. I realize this is probably 3years late, but if someone else needs this they can use it too.
@christkivouvou66896 жыл бұрын
Hi,i love this movie but i would like just to know how i can do for to have the same distance between baluster ? 😉
@akshaykorlekar5 жыл бұрын
Niceeeeee!!!!
@mrak61436 жыл бұрын
Can u plz do some models in conceptual mass & curtain panel pattern based.. I searched it every time still I can't get a clear idea about it... will u plz create some models...
@raneembaniyounes44196 жыл бұрын
Super like
@fareedsawanthhsgsgftyujkg39826 жыл бұрын
How to make marble sill with molding?
@jigmechoda84415 жыл бұрын
Can please show me how to create typical Bhutanese railing.
@SahibFakhri4 жыл бұрын
My dear teacher, I hope that you answered the problem of the disappearance of the option bar, noting that I use the 2018 version
@nour_n_dot4 жыл бұрын
Which option bar?
@AhmedMMagdyAlKharbotly4 жыл бұрын
Try to put rail on normal straight stair
@faisalkv82115 жыл бұрын
Thank you sir,can you please tell me slowly
@selecttv29796 жыл бұрын
can you model for us la Rotonda ?
@jonathanbonaparte56732 жыл бұрын
when are you going to do some drawings in feet, can't follow you in meters
@abdelazizfahedlaroui225610 ай бұрын
😢😢
@dimabadr20604 жыл бұрын
i wanna show you what i did bcz of your tutorials but idk if you trust me enough to send me your email address
@wadaanaarchitect98536 жыл бұрын
Awesome i learned a lot of new things in Revit plz do one tutorial on classical or corthian order