Cleaning EGR and Intake System

[@captainsoviet6755]

Right after watching this video, the cholesterol in my vein was cleaned. Many thanks.

[@ZenithDiagnosticScanTool]

Lol =)

[@유교탈레반]

After watching this video, the river became clean and it was able to drink. Thank you.

[@nowhere64967]

the egr ,particulate filters, plastic intake manifolds are the best planned obsolescence ever imagined for the piston engine

[@towitowi1]

😂super profesjonalny film , dzięki chłopaki za dzielenie się wiedzą!

[@disturbed_deliberations]

I don't let anyone work on my vehicles. I do it all myself. But I would let you guys. Excellent cleanliness, knowledge and workshop. Great mechanic.

[@1marcelfilms]

Ha only when they are recording obviously

[@niloyu105]

New subscriber watching here Al Khafji Saudi Arabia from Philippines...

[@freddypuma1287]

Excelente informacion de los mejor .Y sobre todo gracias por poner la opcion de poder poner subtitulos en español.Saludos desde Moquegua Peru de un nuevo suscriptor de su excelentimo Canal de mecanica y electronica Automotriz que es lo maximo.

[@longhuynh5249]

Thank-you so much for a comprehensive and high quality professional video on EGR system. Now i am going to use this knowledge on my Audi Q7.

[@ibrahimaly7254]

Very good job l am in Sénégal,I appreciate

[@lesleyavery7166]

Great Video and very thorough thanks for sharing

[@mk6957]

Please check 2:57 time drawing. When you start a cool engine the EGR is closed, so when EGR valve is stuck closed, then on cool engine idle can not have a rough idle, because EGR is closed on idle anyway.

[@adamwidera8]

Very nice and usefull video. Good job !.

[@ZenithDiagnosticScanTool]

Thank you!!

[@billrook6165]

Good thorough mechanic. Nice to see.

[@freddypuma1287]

Una consulta ese problema con la EGR no da codigo de falla,seria bueno que lo comentaran.Gracias nuevamente por la importantisima informacion que nos brindan.saludos desde Peru.

[@chrisstuckey64]

I like the cleaning process. Good job

[@SergeantSpandex]

Awesome video! And got to see inside those intakes!

[@jaseralomary8854]

Many Thanks for excellent video

[@ZenithDiagnosticScanTool]

Thank you for watching!

[@charliediver1560]

Great video thanks for sharing

[@franklinsanchez06]

Good Job 👍🏻

[@ZenithDiagnosticScanTool]

Thanks!!

[@michalmazurek4385]

Brilliant video guys! Thank you for sharing tips.

[@ridhobaihaqi144]

Much better than authorized workshop

[@ไพรัชแซ่จู่-ธ1ฐ]

Nice vdo. thank you

[@ZenithDiagnosticScanTool]

You're welcome. Thank you for watching!

[@mauridiaz6102]

Excelente video muy explicativo Saludos desde chile

[@ZenithDiagnosticScanTool]

Gracias!😁

[@daesalas]

Hola, muy instructivo tu vìdeo, yo tengo un Kia Carens diesel con los mismos sìntomas y tengo un scaner G-Scan 2, còmo puedo hacer la prueba que haces con el G-Scan 3?

[@niloyu105]

Your a man Sir Jason! 100k Odo thank you for great infomative video...

[@reyangelodahonan7320]

nice and great video, very informative... i hope you could make a video on KIA Sportage 1st Gen. thanks!

[@citylinkz]

Awesome!!! My mechanic made me buy a new intake manifold!!!

[@SeigfredWall]

amazing cleaning tricks bro 👍👍👍

[@marioburayag2579]

Nice video and thanks

[@bourzimeabderrahim1717]

Merci bcp. c'est quoi le bruit de claquement enregistré apres l'ouverture de couvercle superieur de l'huile moteur ??!

[@alexanderstefanxandraswedi5835]

Good job !

[@soubhikarbouj7103]

فيديو رائع مع قليل من الدعابة في التعليق. عندي سؤال لو سمحت : عندي سيارة اوبل زافيرا تورر ديذل اورو /6/ 2018 تعمل على نظام الادبلو هل استطيع ان اركب جهاز حاوية الزيت ( oli catch can ) للتقلبل من الكربون داخل ال EGR . وشكرا

[@roland20002000]

I hope you will be able to answer a question for me. Is it the injector washers that are causing the excessive blow by?

[@autovagauto6329]

Amazing job

[@nelsyoung833]

Well explained. Good job!

[@hoylekim]

Please do this to my Hyundai 2017 Santa-fe 2.2 eVGT, Scott!

[@MrSukhwinder22]

Please make a video on cleaning of the Turbo intercooler of a diesel engine and also the cataylic converter...

[@dgoodskaiarahi3694]

Hi its I'm from New Zealand if you clean the EGR valve for Kia Sportage can you removed all stuff like air manifold air filter injector? I like you guys' video they help me alots

[@RichieRich845]

G-Scan best tool I have bought, I did the same thing last week end, and guess what, I have to do all over again, one of the flaps had broken off and was missing, do you think it went in the cylinder? How would go past the valve? I also removed the bumper and cleaned the intercooler. Jason where in scan tool can I make the headlight washer come out so I can put the covers on? i40 2012

[@ousmanesarr7287]

Good video but How does replacing injector washers decrease blowby on this particular engine?

[@Hussam-Tech]

Yeah I’m asking the same question 🙋🏽‍♂️

[@Hussam-Tech]

kzbin.info/www/bejne/sKuwqn97aNajh5Y

[@abdelilahbaghdadi8941]

I'm asking the same question too? 🤔🤔🤔

[@fuckjewtube69]

It doesn't he must have changed the pcv

[@stuartarneaud218]

That steam cleaner works great

[@bangissagaling2076]

Amazing. Good job sir.

[@BendeIstvan8112]

Great job, guys! Very infromative, and useful. It does not matter, what type of car we have, if it was a diesel, it is hardly recommend to make these cleanings. Unfortunately, in Europe, because of the fcking EuroNorm standards, manufactures have to install so stupid things on the engine, that lies to save the enviroment, but it kills the engine in some years. Most of the owners do not know about the neccessery of the engine intake and EGR cleaning, however it is as neccessery as the regurally changing engine oil and filters. So Thanks again, I will make it on my car as well. 1 question: What is your opinion about professional carbon cleaning technology? What we can see on your video is the manual cleaning, but it is possible to clean the engine parts, by hidrogen gas, that become metan-gas in the engine during the cleaning procedure. So, in your opinion, does it work, or in every case it is better to disassemble the parts from the engine and clean them manually? Thanks!

[@syms85]

Would blanking off the egr damage the engine? If you can’t blank off how often would you have to do this clean, my Santa Fe 2010 GRDI has done 77k. And rough idles in start up but when you rev up the engine it goes away. Great video!

[@skipp786]

I noticed the start after reassembly took a bit longer. In my EGR removal and cleaning resulted in no start after reassembly on a 1968 cc VW/Audi Diesel engine. What could be the reason

[@Auto_Tech_shivanand]

THANK YOU SIR.!!!

[@ZenithDiagnosticScanTool]

We thank you! Hope it helped!

[@Auto_Tech_shivanand]

Your all videos helpful We expect more DTC from you.! I work at Hyundai Electrician

[@garagefiftynine8213]

good job

[@robl5833]

A bit confused about the intake port cleaning. I would have thought a lot of water from the steam cleaning would have gotten into the cylinders even with the vacuum or did I miss something?

[@luisojea]

i guess you can put the crankshat in closed valves position for each cylinder, i thought exactly the same

[@ScatManAust]

Great video, what chemical is the pre wash ? Anything special ? . I ask because I have done these jobs many times and that gunk has never come off anywhere near as easy as shown in your video. I do use a real old style steam cleaner as opposed to the hot high pressure washers everyone uses nowadays. Also I take it that the engine is turned over to close the valves when cleaning the inlet ports on the cylinder head ?

[@ZenithDiagnosticScanTool]

Hello there! Thank you for watching! We hope we can give you a clear answer to the chemical but the local shop shown in the video did not want to share detailed information about the chemical they use. However, they claim that the hot high pressurized steam washer is what most likely cleans the carbon sludge on the parts, not the chemical. If you were asking the chemical used in the wash equipment prior to the steam wash, it's just normal water based part washer solvent commonly used in the shop. Yes, we noticed only no.2 cylinder had its intake valve opened, so if you look at 14:53, we connected air hose to no.2 injector hole on the block to blow out the chemical going into the chamber. Turning the engine over to close the valve and cleaning the port would be the perfect way for sure! :) Thanks for your comment!

[@edmundnimely9145]

My kia sportage is sending oil from the breather to the intake manifold. What is the problem,??

[@Hussam-Tech]

Great video! A question what is the washers that you were talking about min17:15?

[@chrisellingson123]

I think he was referring to an injector cylinder seal. They are made of copper and look like a washer. If they leak the upper injector o-rings fail you get a compression leak into the head; AKA injector chuffing. Some engines have a leakage valley/gallery between the the upper and lower injector seals that allow compression and/or leaking oil to escape the head, this helps with detection (oil and/or exhaust gases leaking out head) and reduces damage a bit.

[@solonpogiatzis2368]

Hello i have a tucson 2006 2.0 L. Diesel. While i drive the performance is dropping(i think turbo isnt working) and if i turn off and then on the switch it goes back to normal. The check engine Light is on and i have P0401 code. Could be the egr?

[@abbasmuhsen2715]

Best efforts done new engine live . I have question . 1-Egr used to reduce Nox to help environment health 2-Egr used to reduce engine temperature 3-egr valve closed at idle and opened as rpm increases 4-Total amounts of intake air is divided by recirculation exchaust gas through egr valve and outside fresh air 5- at high rpm which one should have high flow rate egr or fresh air ? 6 -how l can fix stuck closed or opened egr valve depending on flow by using G scan2 data analysis Waiting your response with my best regards bro

[@ZenithDiagnosticScanTool]

I guess only number 5 and 6 is your question?:) 5: At high RPM, flow rate from air intake through Variable Geometry Turbocharger must be higher than the rate from EGR. 6: To fix the stuck closed or opened EGR valve due to carbon buildup, the first thing you can do is disassemble and clean it thoroughly. You can then inspect EGR control motor for its resistance according to service manual. If the parts are out of spec, replace them. If you were asking how you can diagnose the symptom by using G-scan2 and 'Data Analysis', it is not easy for us to answer because there could be other symptoms as well. However, as shown in the video, you can select air mass and EGR control duty cycle and increase the rpm. If the EGR is working properly, as the rpm increases, EGR should be opened and air volume should go down as the inert exhaust gas is going through intake. However, if the EGR is stuck closed, air volume will not decrease even though the EGR duty cycle from G-scan is showing that EGR is opened. Hope it helped.

[@abbasmuhsen2715]

@@ZenithDiagnosticScanTool thanks for your reply. Hope new video to test cylinder compression by using g scan2 ..

[@TFV-Motorcycles]

Can i use diesel for washing egr?

[@h.sapiens3404]

Amazing 🤩

[@launchtube5653]

Perfect 🧐👌

[@jimcorrigan7162]

I would have cleaned the injector nozzles on a wire brush when fitting the new washers, and left the pipes loose at the injectors when starting prevent dirt from entering the system. Jim

[@skipp786]

Very nice methodology and great video.

[@lealaldoa]

How often should you do this ?

[@dr_cangrejo]

Hi everyone... Why don't clean diesel inyectors?

[@ZenithDiagnosticScanTool]

Yes it would have been great if we cleaned the injectors too.. next time for sure! 😁

[@dr_cangrejo]

@@ZenithDiagnosticScanTool okay no problem i just ask because it would be good idea

[@dr_cangrejo]

I love the video how much is the cost of this service? In $

[@ZenithDiagnosticScanTool]

Thank you! It depends on the model but for Kia Carens it was $450.. They will give you discount if you tell them you are our subscriber..🤔

[@dr_cangrejo]

@@ZenithDiagnosticScanTool okay it just that we do the same work here in our work shop but I didn't have idea about price ti compare. Thank You

[@ZenithDiagnosticScanTool]

@@dr_cangrejo That's great!!

[@lloyde73]

Where can i buy this obd2 scanner?

[@larryd5614]

Great Video. Not sure I would want to attempt a cleaning like this. What would the cost be to have it done by a mechanic?

[@benjaminmentink5955]

How were you not putting some water and cleaner into the at least one of the cylinders and from there into the crankcase. At least one of the inlet values would have been partially or even fully open.

[@rhandyreyes6845]

thanks for the knowledge sir....how to order gscan 3?

[@jacquesateliergalleriedart3551]

Thx you

[@CelataForCongress]

Why would the washer on an injector have any effect on PCV blow by gasses??? You would just have a dirty injector.

[@anwarbadran3629]

Bark allah feik

[@niftyscale631]

helpful video bro keep it up. btw i got a question, my hyundai accent 2012 crdi is hesitating when accelerating even when its hot or cold engine. and i noticed the EGR is intermittent. it opens and close most of the time. I;ve cleaned the EGR,Intake manifold,MAF,MAP,TPS, Waste gate, ECT, cransk shaft and cam shaft sensor, replaced MAF, replaced EGR assembly. Fuel rail sensor, fuel pressure sensor. but still EGR opens and close thats causing the hesitation. do have any idea whats wrong?

[@Ed-ip2sg]

All of this build was the result of egr failure or poor design?

[@AddictedtoProjects]

Great video. Very clearly explained and great editing! Can I ask how many kilometers the engine had? The engine bay looked very clean, so it can't have been that many kilometers?

[@ZenithDiagnosticScanTool]

It had around 100k kilometers on the engine. We believe the owner took good care of the car. Thank you for the compliment!!:)

[@salvadorabando4530]

as NOX is created above 1300 degC, on my opinion it's impossible for such small engine will emit exhaust gas temperature.

[@simonmears1726]

had to change EGR pipe on iload it split apprantly Common problem soot in engine bay 192 thousand kays hope EGR okay 1100 to replace genuine I try and keep throttle body clean from soot and blow back sludge

[@АлексейКрюков-щ5м]

А форсунки то почему не помыли? Грязные поставили!

[@kacioalves4000]

EGR só serve pra acabar com o motor do carro mas... o nosso pulmões agradece

[@stephencox4224]

Not so sure about cleaning inlet ports like that unless you make sure all valves are closed so nothing gets inside the engine and that means removing camshafts and or rocker arms depending on the engine design, without making sure all valves are shut or turning the engine over to make sure each cylinder inlet valves are shut for cleaning this could end very badly. You sure as heck do not want that water or chemicals or sludge inside the cylinders. The sludge especially can bake rock hard and sit on top of the top ring and then start wearing out the cylinder as it travels up and down with the piston. Tp put this into perspective say you have an engine say a Chevrolet V8 with a 4 inch stroke that means every revolution to piston and rings travel 8 inches multiply that to say 1000 rpm at idle that means 1000 x 8 inches per minute travel up and down the cylinder, Then think about how many RPM to travel say 100 miles at an average of say 2500 RPM and suddenly the potential wear factor of all that sliding friction up and down the cylinder makes you realise just how important good oil and regular oil changes are long term

[@robl5833]

Completely agree. I didn't think that was right. Hydraulic lock if all that water gets into the cylinders. I can't see how a vacuum cleaner was sufficient. I do each cylinder in turn with the valves closed on the compression stroke ideally TDC and block off the other ports.

[@haseebkhan7426]

Sir i am a mechanic electrician but sir i am not expert Sir i want to be a great Wright sir can you gave me a visa of your country? please

[@ZenithDiagnosticScanTool]

Mr. Kahn. We cannot offer you a visa but here's a link that might help you: nhglobalpartners.com/south-korea-work-visa/

[@haseebkhan7426]

@@ZenithDiagnosticScanTool great.sir you can help me how to become a good worker?

[@ZenithDiagnosticScanTool]

@@haseebkhan7426 You are already a good worker. Your passion is what matters.

[@sylvainrenaud6256]

That what they call technologie 😕

[@capadocianman]

Like a smoke cigarettes

[@yngvardharjo3704]

not my car u clean.

[@yeshuaisthesonofmantheking4065]

A prayer for peace. Father God, I often find myself overwhelmed by circumstances that are beyond my control, and I am easily distracted by things that don’t matter. Please forgive me for not consistently placing my trust in You. Even when I am faced with intense situations, You are still with me. You are the Creator of peace, and I can have access to Your peace-filled presence whenever I draw near to You. So instead of silencing Your Holy Spirit when I start to feel anxious or discouraged, help me to make room in my heart and mind to experience the peace You freely give. In Jesus’ name, Amen.

[@josephberrie9550]

WHY the annoying pointless background music ?????????????????????????????????????????????????????????????????????????

[@playboytvish]

good job