CLEAR back glass for Samsung Galaxy Phones custom DIY

You can find replacement backs HERE:
GS6: amzn.to/1ph6k7y
GS6 Edge: amzn.to/1TtXXSg
Note 5: bit.ly/1R8iiwd
DOUBLE SIDED TAPE: amzn.to/1ph6tYD
Let me know if those links stop working or if you need something else!!
This video shows how to remove the colored part of the glass on your Samsung Galaxy phone. This works on the Galaxy S6, S6 edge, Note 5, and Galaxy S6 Plus.
----------------------------- If I helped you out today, you can return the favor by following me! -----------------------------
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
GooglePlus: bit.ly/1YyKice
-------------------------------------------------------------------------------------------------------------------------------------------------------------
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

[@degeneratewinners]

the Hillary graphic was priceless

[@excalibur1812]

it was!

[@tomgjeka7028]

it is now lol

[@Thelomes1]

Total Tech go Hillary...boo trump

[@ilmmazum]

Total Tech lolllllololololololololololloolololololololololololololllololololololololololololololololololololol

[@sadayokawakami8844]

Total Tech Fuck politics but he right

[@MrPanda-ke9rf]

I follow jerry rig almost 2 years and half.. KZbin suggestion : 2017 : not yet 2018 : not yet 2019 : hey watch this

[@sazarkanas5921]

​hello comrade malka

[@afzalmohammed1133]

Your dedication to the creation of these videos is amazing, enjoying every minute.

[@ChristopherHayniedd980]

That's awesome looking. I was a welder, fabricator and industrial mechanic for over 20 years so appreciate the look of the internals.

[@Ashkanman]

This looks so cool

[@EricWitrigs]

Excellent!!!

[@kill_uzumaki]

This way you see exactly how the phone blows up !! 10/10 would recommend to a friend !!

[@Pure_KodiakWILD_Power]

nice. i was just thinking about this recently ( is google now reading minds? ). at least those glass backs are good for something, except if it shatters, it won't have that film to hold it together.

[@ravamoelia7674]

i think google can read your mind or it's from something you watch recently

[@IntellitechStudios]

That's actually a very good point. You know what now lies directly beneath the glass? The Battery! Yeah, be careful. get a very strong clear case. I'd recommend UAG ice as it will protect it but you can still see the insides.

[@iCeQubeTomato]

If note 7 had this we would have seen the explosion coming

[@suyini734]

Ron 😂😂😂

[@TyphoonN]

I just did this to my galaxy s7 today and i think it looks really cool. I had quite a bit of trouble pealing the paint or whatever off but I eventually got it :D

[@michaelcampbell7717]

Really good video! I love the insight you provide on every video and make us tech enthusiast really see what makes our tech work on a different level . Also awesome camera work ! . Thanks and keep up the great work !

[@AaronBilger]

This is something i would love to show off at work!

[@danielhuang2488]

Such cool concept! Phone manufacturer should start making clear back phones.

[@Sgt_Gumball2]

Dang! Nice Video! I like how you can see how to phone is working and all that good stuff.

[@SebastianBlix]

YESSSSSSS!!! THANK YOU! Just followed on IG and FB. Thanks again.

[@vepokk7554]

That looks so cool. Reminds me of Gameboy Color.

[@corybrien]

how does it look with the tape once you reapply the cover? is the tape an eyesore? does it hold well? great tutorial.

[@josephwatson3634]

To all of you saying you will lose your water proofing. Yes, you will if you use tape to put the back on again. BUT, if you buy actual adhesive glue rated for water proofing, you CAN retain your water proofing AS LONG AS it is applied properly, which can be tricky. It is possible considering they come this way and you can buy the same adhesive glue they use in the factory. You can even buy better stuff then they use.

[@mijirok3083]

that looks freaking cool

[@jsaiz681593]

yay!! now i can see if my note 7 will explode!!

[@saqibaamer2185]

James saiz Smart

[@roberto-gy6nj]

James saiz that'd actually be cool

[@GetFixed]

"or your favorite presidential candidate X x, XX." That part alone made me tear up a little. What made you think to peel it off. Very cool by the way.

[@benjmiester]

Great video! My buddy has a very good multilevel heat gun that would work great for this. I think I'd like to try to tint mine a unique color. Maybe sneak a few tiny leds in there or something. IDK, just spit-balling.

[@DrewFuss]

This is the coolest mod I've ever seen on a Galaxy S7.

[@curlykori]

Awesome humor and idea.

[@ShunbunNoHi]

For a second I thought my note 5 had a plastic back, it came off pretty fast and I did a scratch test to double check lol, things you learn on this channel

[@Jona]

There is one for the iPhone too.. Could you review it too? :)

[@nanaki-seto]

I did this on a glass only s3 repair for a guy looked slick. Then my boss who also owned a print shop made a replacement color layer with a fairly fancy graphic for a note 2.

[@100iloff]

Great job and greetings from Bulgaria! By the way, can you do the same thing with a Xperia Z series back glass?

[@laravanos9884]

Awesome, will it work the same way on my samsung galaxy a5 2016,

[@OscarSanchez-pm2pk]

This is how everything started. Now i understand your cases hahaha

[@transgrl]

I did this accidentally whilst removing the glass on an s6 edge. I was replacing it anyway but now I have a.nice souvenir

[@AnasAhmedNazeer]

damn the note looks better than ever. all i need is to get one xD good tutorial 👌

[@CIZ51131]

hello and nice work Jerry , how can i find a transparent back cover (not case) for LG G4 to appear like in this video , kinda , coz i liked very much this idea of transparent back case , thank you

[@Targaryen_dragon]

Awesome.. Looks better now 😁

[@TheArgenCraft]

nice tutorial! cheers from Argentina

[@JerryRigEverything]

+Argen Craft Nice! Thanks for watching!

[@TheArgenCraft]

Thanks you for awesome tuts!

[@jano60626]

+JerryRigEverything ur videos are awesome

[@franzstephencortes8543]

This is just what I've been looking for! My god, its like a sports car with a glass cover on top of its engine! Is it possible for an xperia z5 premium? Cuz I would like to experiment on it. Hoping you try one, thaaanks!

[@henriheinonen6258]

I have done this same to my Sony Xperia Z3 several mount ago, And gotta say it looks really cool specially on sony because you can see all sircuit board!

[@risvangonzales]

hey, a question. I also have an Xperia Z3, it was secondhand when I bought it. I once replaced the battery with my own hands, but the backdoor flexes and could bend like plastic, not stiff like glass. Is it possible that it had been replaced with a non-original one by the previous owner?

[@henriheinonen6258]

Actually these original sony back glasses are not really hard stuff so they bend quite much reason why sony use softer back glasses than Samsung is that they are more durable. And if you boy replacement back glass from China it will be super hard and first drop then it probably in million spieces.

[@hasan-pu2fr]

You've got to try the front too so some of us can follow lol I did my as the same as yours I loved it infact some of my friends loved it

[@muhammadamohsin]

yaya now I have a clear phone thanks for this

[@william_2610]

Different video, but thanks for helping me repair my nexus 7 :D

[@WooHooGreat]

I saw this on reddit, did you posted the pic there?

[@nicklasnilsson8217]

What was the doubled sided sticky tape good for? And how to make the glass stick when putting it back? is that what it's used for? Thanks

[@baspyHQ]

is that also working with a galaxy a3 2016? because im not founding videos like this with a a3 2016

[@suvtropics]

This is super cool

[@MIXANDMTCH]

"favorite deity" YESSSS ZEUS

[@jameshiggins4067]

I'm definetly going to buy a used S6 Edge on ebay and do this :)

[@cedriclucca8406]

Hey Jerry, question. For this project, did you remove the wireless charging pad, or did you leave it?

[@Skarface08]

thanks again for the shout out man!

[@JerryRigEverything]

+zac williams Dude, we even have the same name. You spell yours wrong though. Its Zack.

[@Skarface08]

+JerryRigEverything hahaha! ye I use to spell it like that but hey. im lazy the shorter the better

[@bengerendash]

might want to ok clue that this will effect the water resistance given the change in adhesive...

[@ilshatkarimov1528]

Great video. Can you make a video on how to replace a screen on htc m9? Thanks

[@JerryRigEverything]

+Ilshat Karimov Sure thing! Here ya go: kzbin.info/www/bejne/fqingHapidZ5jZY

[@lkdunck3]

Thats awesome!!! i am curious if that would void a warranty on the phone.. otherwise my husband is going to wake up to a surprise on his phone LOL

[@dawidsan1520]

I think without any cover, pictrue (or any else) it look better than original :) I want it!

[@bassculture6249]

please do durability test on lg x power

[@musliminkarben]

that was cool

[@N1sm0NIC]

could this work on the front side as well? would love to pull this off on a S7

[@harleyvincent6567]

seems like EverythingApplePro is using your idea xD

[@ikolobday]

Just did this on my S6. It looks awesome.. :D

[@BurgerBin]

how did you get yours to stick

[@ikolobday]

Lakota Staffen Half of original tape stayed on my phone but on the other half black paint(plastic stayed on) so i had to use diffrent one that i have found at home.

[@BurgerBin]

+.TheGeek~ what did you use to get tbe back off im stuck

[@ikolobday]

+Lakota Staffen use suction cup... You can get it for 2€ on ebay

[@PratikSahu18]

he did this year ago and no one noticed but now its trending.

[@samhutchins5890]

this is almost impossible to do, you make it look so easy. my s7 edge back is shattered lol, luckily they're only 10 bucks on the internet

[@x9x9x9x9x9]

Thats sick!

[@GSXRNissan]

Nice look.

[@lokendersailani5482]

jerry can you do a durability test on galaxy a5 2017??

[@Kazwell96]

Would using clear silicone adhesive around the back restore some form of water resistance?

[@user-cq5sn5hq4m]

Thanks a lot. But isn't the Water Resistance f*ed up after this? Or that double side sticky tape is right for water-resistancy?

[@slowwmoh]

Can I do that for the OnePlus X? It also has a glass back

[@Sean-if7rp]

Taha Mohannad Is it not ceramic?

[@slowwmoh]

Sean McGeeney No, that's the limited edition Oneplus X with the Ceramic back

[@Sean-if7rp]

Taha Mohannad Oh right I didn't know that, then I assume it would be the same as for this, however without a tear down showing the difficulties of it you are going in blind

[@perez9619]

Search Google.

[@hakimdurand8427]

I watched your s8 video now im watching this...Do I need the paint removal thing for my s7 or is it possible to get the color off like this

[@andreaswee2671]

Looks dope

[@amishpapneja23jan]

please make a video to make the s7 edge clear from back. its a humble request

[@LZ2SM]

found a phone like that in a recycling bin.The swollen battery managed to unglue the back . I've never seen so much swelling of a battery!Still,the thing works,and for 20 bucks I'll get a working s6.

[@jmcsm3288]

jerry is there any way how to fix the bubbles of the front screen of the note 5? usually it occurs in the top left of the screen.. this is a common issue of the note 5

[@100percentGetDatCash]

Awesome video Jerry. I need a back for my Note 5, got any leads? Thanks.

[@JerryRigEverything]

What color? I have one supplier in China with them, but they are 30 bucks at the moment. If you can wait the price will drop considerably in the next 2 or 3 months.

[@L0stW0n]

+JerryRigEverything I need one in black. I don't mind paying 30 bucks. Thanks for replying.

[@jano60626]

+JerryRigEverything can you do a iPhone 6s Plus bend test please

[@jano60626]

+JerryRigEverything bro

[@jano60626]

+JerryRigEverything we need 6s plus bend i

[@atlas-vista]

damn right I'm subscribing to this guy

[@AnamorphicFilmsproductions]

can u test moto x pure edition and test the durability test

[@boaw69]

nice mod. do more of this please ~

[@samwhelan4844]

awesome vid cheers. do you think this could be done with the front glass too?

[@renestaiger5322]

I hope you're joking

[@OhhYasssh]

Recommended in DEC 2016??

[@nightmareinaction629]

YASH RAJ SHARMA loll

[@JBTYpr]

i know right?

[@porg7063]

YASH RAJ SHARMA January 2017

[@OhhYasssh]

The Doctor see comment date

[@Ruinedd]

YASH RAJ SHARMA February 2017

[@trapped1sss]

Can you do this to the note 7?? If so pleas make a video

[@patrickhendershot9105]

I wanna see this done with a Electroluminescence layer behind the glass.

[@payambreaker]

and then say farewell to your waterproof galaxy phones for ever!

[@alexhernandezub2838]

Persian Monarch what u mean?

[@perez9619]

The phones are water RESISTANT not water proof. No phone is water proof.

[@perez9619]

alex, once you take off the original glue/adhesive any water resistance is gone. And no, using some new stuff won't bring it back.

[@indotravelguy2004]

forever? lol you can buy a second phone that is water resistant.

[@donald7216]

Thank you

[@TTimeTristan]

Would this work for the Moto Z Play at all? It has a glass back, but has plastic underneath that. Could I take the plastic off?

[@MOTORCYCLES-ANDGUNS]

can u do the same for the front make it clear??

[@5najduch]

Is it possible to print a customised design to the glass back? then glue back on

[@jeevajitsingh]

Hey guys, im looking to do the same thing on my gs6, but not sure which screws/ parts to take off to get the cleanest look, willing to sacrifice wireless charging :)

[@DANIEL_eltravieso]

👍Thumbs up all around👍 Jerry. 🤥 priceless on that last ❌image❎. 1:38

[@xguntherc]

Yo Zack, can I do this on my Galaxy Note 5? It has a glass back

[@INVISIBLEMULTICLAN]

can u apply the galaxy s6 emerald green back to the normal s6 ? (if possible the front too ) :)

[@ashiqkv218]

now that's cool

[@konosuba5737]

Lol, I love the blaco saphire colour of minr

[@TwanistATR]

Hey Jerry, Recently I got my iPhone 6 screen changed due to it being completely shattered. What happened is is the camera and light sensor aren't properly aligned and so they don't work. Any ideas on how I can fix this?

[@StevenJames124d]

Can make same idea with my galaxy j4 core

[@jacobparkinson2973]

can you use some clear glue? instead of the double sided sticky tape

[@dgreatll]

I can't wait to do it on my iPho.... damn

[@sped6954]

Mine didn't come off nearly as easy, but once I was able to establish far enough in, it all came off in one piece. The bottom ⅓ of the sticker came of in fragments about ½" long by ¼" wide, and that included heating it and getting under it with a blade. There wasn't any middle ground either; it went from those tiny shards to one solid piece. Actually, the only reason I even did this at all was to remove the AT&T globe where the Samsung logo should have been. If it said T-Mobile or Samsung, I probably would have just left it alone. The back story is that I ended up getting every scrap of use out of my Note 5 before I bought a new phone. The screen was cracked, the rear glass was shattered and the battery was so badly bloated that I had to keep the phone in an OtterBox Defender case just to keep it together in one piece. The phone locked up and none of the buttons responded, nor did the sequence to boot it into recovery mode, so I pulled the SIM card, put it in an HTC Amaze 4G, ordered a Note 10+, waited for the battery to die so it would shut off, charged the battery, replaced the SIM card, stuffed it back into the OtterBox and used the phone for another five days while I waited for the new one to arrive. About a month went by, and it started bugging me that my newest backup device was made in 2011, and since there was nothing wrong with the majority of the Note 5, I ordered a new/used digitizer and midframe assembly for it. The guy threw in two OE batteries, the S-Pen and the rear glass cover. The only digitizer in good condition he had for T-Mobile was white, and his only white covers had either a globe or a check mark on them. Honestly, I'm surprised I let it go for over a week like that since I don't have AT&T. All this for a phone that in all likelihood will probably spend the majority of the rest of its life sitting in a drawer. Anyway, the first video of yours that I watched was the teardown to replace the battery, which was very helpful after I got past the part about removing the cover. Even though mine was already shattered, I watched it anyway, just so I would know how to remove it if the need arose again.

[@lamurtedeenzotorres7054]

how does the double side ed tape work I'm thinking of doing it

[@TheJfp96u]

Pretty Cool

[@UzmanrUsh]

By doing this .will it drain the water resistant capability?

[@seanlally7384]

I NEED THIS

[@rohandogra9773]

I want to see clear back on samsung galaxy A7 2017. thanks..

[@patrickmonkman8151]

could you then engrave it with a laser cutter or hand engraver?

[@Pure_KodiakWILD_Power]

sure, why not. it may compromise the integrity of the glass, though. etching woild probably be a safer option.