Clear Coats, Mipa CX4, Multi Mix2, Kapci 6030 & Upol 2080 Reviewed With Devilbiss DV1 Clear

[@sw9506]

fantastic video Pete. Can't believe your putting these things out using your own money. This is such an honest review and very informative. Keep up the reviews Pete. Great work

[@peteshobbies5383]

Thanks mate, much appreciated. I genuinely enjoy playing with all this stuff and I have the time to experiment , it does cost me money but I enjoy the freedom to say what I think, glad it comes across ok, certainly with regards to the results there really is little in it with these clears as far as the final finish is concerned but that doesn't tell it all, the Upol is the hardest to spray as it has little flow out but because I'm used to it I get good results with it, thanks again 👍

[@cristianb.4135]

The Loss of gloss is due to the fact that the clear coat continues to dry in the following days till reach the effective dry film... Ms clears, as you know, are the worst.. real hs and uhs are the best. Anyway, as usual, very good video!

[@georgekyriacou1338]

Really enjoyed your video. It's the first time I have seen head to head comparison of clears. What surprised me was how close they looked in terms of end results. That is mostly down to your good technique. I might try the MM2 soon on a project. Love the Mipa but it's nearly twice the price and I can't justify it at the moment.

[@peteshobbies5383]

Hi George, glad you enjoyed the video, I've been wanting to stitch it together for a wile, I thought it was a bit better than just four separate videos and coming from the same painter was more of a comparison as it obviously all in one. Yes, the MM2 is good, having said that 4 people contacted me on Instagram when i put a photo of it up saying they were having problems with it and the problem varied as well so it's not for everyone. The CX4 as you say is good but new stock of that has got really expensive, fine if you can pass it on but as budgets get tight not so appealing. The final finish was virtuality indistinguishable, that's after 2 days, course there's more to it than that but there's only so much you can do, I have used the Upol for year's so am used to spraying it, it definitely doesn't flow out as well but if you know that you can compensate as your laying it down, cheers buddy 👍

[@jimmypratt6450]

As a painter for 46 years , you only get what you pay for . I've been using Novol clearcoats for a few months and they're brilliant but my local paint supplier gave me a sample off the new roberlo clear unix 250 and its a fantastic clear for the price . Great video its nice to see someone comparing clearcoats

[@peteshobbies5383]

Thanks Jimmy, of course you're right, you do get what you pay for but occasionally something comes up that defies that sentiment, cheers 👍

[@brettritchie4014]

Outstanding review, thanks for putting in this much time & effort

[@peteshobbies5383]

Hi Mate, Thank you, much appreciated 👍

[@deanbrown7643]

Thanks pete got a bonnet comming up soon and gonna try the mm2 I think it will suite the budget I'm working with cheers bud 👍👍

[@peteshobbies5383]

Hi Dean, yeah, its pretty good especially considering the price 👍

[@spo5egy]

Brilliantly done 😊 I've always been a user of maxmeyer and mipa, I've been out of the painting game for a long time, but getting back into it to finish my wee fiat 500

[@peteshobbies5383]

Hi buddy and thank you 😊, it was something I wanted to do for a wile, it's just how to make it into a watchable video, cheers mate 👍

[@bosshawg7427]

I just realized there are two US versions. 2822 which is a "high solids" of 38% vol/43% wt mixed. Then there's the HS Super 2802 which is 38% vol /42% wt mixed. Neither are as high solids as other HS clears, but not bad either. It appears while the solids percentage stated (mixed and unreduced) are quite similar, the only difference I see is the 2802 is described as a "water white crystal clear". A 7.5 liter kit can be had as low as $172 with choice of hardnerner from slow to fast. From the looks of the comparisons, that's a very good deal for the price. I think I will be ordering one for my next project. Thanks again, Pete!

[@peteshobbies5383]

Hi mate, That makes sense, as in the UK we have 2080, same as your 2802, I think. We also have 2081 and a 2082, which is the same as your 2822, I think. I've never used the 2082 but have the 2081 and of course, the 2080 in this video, there is a difference in the 2081 and 2080, the 2081 does have a better flow but I suspect it a slightly lower solids than the 2080

[@TheHumblePaintSprayer333]

I use CX4 with HX4 but not all the time, mainly on bumpers so when fitting up the are nice and hard so less risk of of marking them, also on small jobs that might be going out quicker It’s a great clear and gloss is very good especially for the speed it drys, it’s a bit more advanced technology for fast/air dry clear so probably why it’s quite expensive, also it saves me gas in the booth with little or no bake times so is quite economical on that side of things Down side is the polish window so if jobs are not being polished for a few days or bigger jobs I used Mipa CC9 You can use HS10 and HS25 hardner in CX4 for bigger jobs and a bigger polish window Great review 👍

[@peteshobbies5383]

Hi mate, Yes, I certainly have found the CX4 + HX4 a very good option if you want good results with speed. The polishing window was something I mentioned, I think. As you say, it's only short, which can catch people out that are new to it. Certainly a good clear though, cheers buddy 👍

[@rongamble9884]

Sherwin Williams finish 1 clear is a really good clear also

[@peteshobbies5383]

Hi Ron, I haven't used that one, I'll put it on my list of ones to try 👍

[@danamcintyre3565]

If I do big jobs I always use the Upole 2-1 clear and medium reducer, I haven't tried the slow yet because of temperature when I've sprayed it, but it does really well and the price isn't all that bad. I never used it before but reason I started using it was because a paint dealer that I purchase it from said all the repair shops that purchased from him loved it, I thought yes he was just saying that but there has been times that he was out and waiting on delivery so he must be telling me the truth. Like your videos !

[@peteshobbies5383]

Hi Dana, it's very good value for money, some people like to knock it, but I think some will anyway because of the price, certainly on performance it not bad at all, it likes a good wet coat as it doesn't flow as well as some, as long as you do that it's fine, cheers mate, good to hear you enjoy the videos 👍

[@dredfxcustompaint]

Hi Pete thanks for sharing just about to order some kapci 6030 as my multi mix has just ran out

[@peteshobbies5383]

Thanks Rob, yes, it's a bit cheaper and certainly as good and imo a bit better, it flows out lovely but the hardener has the wrong label on it for sure, the fast stays open for ages when it's a bit chilly, be interesting to see what you think, cheers mate 👍

[@dredfxcustompaint]

@@peteshobbies5383 will give it a go Pete putting the order in next week so a video will be up soon 😀

[@expertcarpainter1373]

Gosto bastante dos seus vídeos! Muito esclarecedor! Eu trabalho com o verniz Kapci 6030 e acho muito bom verniz

[@peteshobbies5383]

Hi Buddy, yes, the Kapci is very good and not that expensive, good to hear you're enjoying the videos, thanks for watching 👍

[@Mikefngarage]

Pete What mini Gun is that....Enjoyed your spray outs. nice big fan for a mini. I would like one of those.

[@peteshobbies5383]

Hi Mike, for this video all were done with the DV1 Clear Gun and the C1 cap, it's a full-size gun, they are very good guns but rather slow compared to some

[@kingvtec100]

Hi pete great video, with honest reviews, ive used the multi mix ms & hs alot & never had a single problem with it yet, as for the kapci 6030 hs thats my next one to try as u said prices have gone up, and kapci ive heard good stuff plus its slightly cheaper than the multi mix2 hs

[@peteshobbies5383]

Thanks Ashley, I've never used the original MM which as you say is a MS but i know people who have with good results, I do like the MM2 and like you never had a problem with it although I know people have, I think i mentioned that 4 different people contacted me when i put a photo on Instagram to say they were having problems with the MM2 and different problems at that so it's not for everyone. I think you'll like the Kapci, it's certainly as good as the MM2 and for me pips it and when you consider it's cheaper by around 10% great value, thanks again mate, much appreciated 👍

[@Cavalier_Steve]

Hi Pete, great video, didn’t know about the polishing window on clears before it fully hardens, I honestly thought you done it after 😯oops. As you know I’ve used the upol as a beginner and thought that I got good results for someone that inexperienced like myself, am keen on trying the Kapci 6030 though. Anyway great video as always mate very good clear information there. Cheers mate.

[@peteshobbies5383]

Thanks Steve, yes, you can polish weeks after if you want but it's much much harder and you often can't get all the tiny swirl marks out, much easier to do it when the clear is comparatively soft, this varies on temperature, hardener and clear , cheers mate 👍

[@Mikefngarage]

the first time I used Kapci 6030 I didnt really like it that much. but that was because I was using accelerator. It just does not work well with that. But later I dint use accelerator and Man I love that clear. it is super easy to spray. retains excellent gloss. Totally predictable. Just spray like you say 1 just over tack coat like medium dry, and one as heavy as you want. Then if flows out beautiful. NO DIE BACK.... just as shiny as ever. just keep the pressure up and it flows then holds without running like a pig like some of them.

[@peteshobbies5383]

Hi Mike, I don't use an accelerator as it normally causes some loss of gloss as you say. The problem I had initially with the Kapci was the "fast" harder, the first time I used it it was around 9c or 10c or 50f, I left it overnight and the temperature went down to 2c or so, it was still not touch cured 24 hours later, apparently fast is like everyone else's normal hardener, so with extra fast, it should be better, in warmer weather it's not a problem at all. As you say, an impressive gloss and is very forgiving, and quite cheap

[@JohnWD40TC02]

Hey Pete, a really really interesting video mate you really explained it well and IMO your findings are spot on and exactly the same as mine, I haven't tried the CX4 but I have heard it's really good and the CX9 UHS is said to be an amazing clear. Like you I've heard a few complaints about the MM2 but have no idea why people have problems with it, I can only imagine they don't read the TDS and probably spray it the same as the Multi-Mix MS which I have tried and it still came out fine. As you know I've used the U-Pol which is a highly underrated clear but as you say you have to spray your finish with that as there is next to no flow-out so it takes a bit to get used to it but for the price it's a good clear. For me the Kapci 6030 is the best of the three (not including the CX4), again as you mentioned it works at it's best with the extra fast hardener but even then it's still a bit slower then the MM2 with fast hardener which I think is why the Kapci gives the better finish. The CX4 is really in a different league as it's more expensive so is a better quality product. Not sure if you know Pete but Kapci are bringing out a new clear in September, I think it will be called the 6050 and will be a true UHS and is said to be one of the best UHS clears out there, I'll be getting my hands on a 1.5L sample kit to try soon, ok I better bugger of as I can type about clearcoats all day🙄😂🤦‍♂ Thanks for doing this Pete🤗👍

[@peteshobbies5383]

Hi John, yeah, the Kapci went from my worst to my best over the 4 months or so of using it, most of that was down to the temperature, as you know it got quite hot here and the slower Kapci came into it own so with xfast I think it will be fine. The CX4 is as you say much more expensive, it's no different in use to the mm2 and Kapci but really goes hard very quick and retains it's gloss doing that, a great smart clear for sure. Yes i did know Kapci were bringing out another uhs clear, be interesting to see what it's like, cheers mate 👍

[@JohnWD40TC02]

When I first started using the Kapci 6030 I did have problems getting a nice flat finish but Gav advised me to add 5% thinners and after that and getting my guns setup better it was fine. I must give the CX4 a try but I still have some of the Tetrosyl and the ColoMix plus I want to use the rest of my MM2 and I've got nearly a full kit of the MM1 that I won last year😂 so many clear kits. I have been promised a sample kit of the Kapci UHS problem is I'm still waiting for the 6030 sample kit that I should have had last November🙄🤦‍♂😂😆 been chucking some Tetrosyl clear through the Sata this morning it's nice clear but very thin👍

[@peteshobbies5383]

I haven't used the Tetrosyl yet, yes, I've been putting thinners in the Kapci and MM2, 5% or 10% when its cold as it helps it flow better, not been using any in the warm weather and its been fine. I've been doing a Wider4 v Kiwami4 with some upol this morning, both 1.4, more of a difference than i was expecting, that's why we do it though to find these things out 😀, cheers mate 👍

[@JohnWD40TC02]

I use thinners in my clear all the time, I'm afraid not to these days, looking forward to your findings with the Kiwami4 v Wider4 shootout👍 I've got so many clear kits kicking around I need to get some of them used up before I get any more but I keep looking at them and just can't resist buying and trying!😭🤦‍♂😆

[@peteshobbies5383]

@@JohnWD40TC02 yeah, i know that feeling 😂

[@medievilassassin]

To be fair I have had nothing but issues with all multimix products , used the HS clear with fast hardner on the weekend we had the heat wave and it is still soft , what I mean by soft is you can put your finger nail in it , I’m going to try the Kapci

[@peteshobbies5383]

Hi Jason, I'm no spokesman for Multi mix but really surprised your having that problem, I've been using the fast hardener all the time, even in winter, 10c in the day 0c at night the MM2 went off ok, of course they will be a little soft for a few days but not that soft, certainly workable for polishing etc, the the warm weather we have now it's goes off much quicker as you would expect. Having said that you are among a few that contacted me to say they were having problems so maybe it a production issue? If you try the Kapci go for the Xfast even in this weather as its more like a fast, not for full resprays but certainly for most jobs you come across, cheers mate, be interesting to hear what you think of the Kapci 👍

[@DatFunnyPerson]

Thank you so much for this information video! I'm very new to 2k clear and I was wondering you were talking about a polishing time window?? Can't I polish at any given time? Wet sand the clear off and then use my polish paste?

[@peteshobbies5383]

Hi buddy, A 2k clear coat takes time to fully harden, depending on the clear used and temperature. This can take a day or a few weeks or more. The harder the clear becomes, the harder it is to polish. So it's best to sand and polish in a time where the clear you have used will be more receptive to polishing, Makes the job easier and faster

[@davidbenson776]

I'm buying a epoxy primer kit primer harndner thiner which would you go with mipa or kapci ?

[@peteshobbies5383]

Hi Mate, they will both work well, I normally use a Mipa one, but I wouldn't hesitate to use the Kapci

[@AmusedIguana-vx3wh]

Im Just a newbie Pete, i was given a can of jewels brand c496 2k hs clear, to do my front bumper with, after a base coat and colour coat.. don't know whether it's me but it looks satin,definately doesn't look as glossy as the back end of my car..? What should I respray with for high a high gloss finish in a can.. Thanks

[@peteshobbies5383]

Hi Mate, I've never used one of these can's, but generally, they don't perform that well. It's hard to know whether it's the product of the application. If you haven't put enough on, it will look satin as it's effectively too dry

[@cristianb.4135]

Hi Pete, have you tried the kapci(White the 6033) over solvent basecoat? I'd like to tried it but i'm a Little bit concerned about the flashoff time/dust free because here in Sardinia the temperature is around 12-13 celcius max....

[@peteshobbies5383]

Hi Mate, Yes, I use the 6033 with the Kapci 6030, the first time I used it the temperature was a max of 6c and went down to -3 at night, it took 2 days to go off enough to remove the dirt nibs. I don't use it anymore in low temperatures. You will have a better chance at 12 to 13c. The best thing to do is use 6031 extra fast, it's acts the equivalent to a fast in European manufactured clear coats, so it should be ideal at your current temperatures. Happy New Year, mate 👍

[@cristianb.4135]

@@peteshobbies5383 thanks for the reply Pete and Happy New Year to you too!!🥳

[@andrewstaton4969]

Hi Pete, what do you mean by 'polishing window ',can't it be polished after this time? Thanks mate Andy

[@peteshobbies5383]

Hi Andy, it can still be polished, but it's much harder to do as the clear starts to lose its softness, so the whole process takes much longer

[@lockstocky2800]

Just love the videos Pete . I’ve just purchased some kapci clear for a smart repair after watching this . I was wondering if it’s ok to use this over a water base coat ? Can’t see anything in the days sheet except the usual kapci base coat recommendations

[@peteshobbies5383]

Hi Buddy, Yes, it's fine over a waterbourn base, as are all the others, good to hear your enjoying the vids, I genuinely enjoy making them 😀

[@lockstocky2800]

Although I did make the mistake of buying the fast instead of the extra fast like you recommended :( I’m hoping I can get away with it . I noticed the kapci has a 10% thinner in the data sheet , can I use any lacquer thinner or do I need the kapci one to match the speed ? I’m getting very confused with compatibility between brands , I presume most primer , base and clear are compatible regardless of 1k or 2k mixed up in the same repair/job ? Hope that makes sense . Thanks for the help

[@peteshobbies5383]

Most TDS of clears will say up to 10% thinners. In the summer, I don't normally use any, maybe just a tad, but up to 10% is fine. Any virgin thinners will do, often called 2k thinners. You can use that to thin basecoats, primers, and clears regardless of make or it being 1k or 2k.

[@lockstocky2800]

@@peteshobbies5383 thanks for the info Pete, very helpful mate . I was wondering where you purchased your clear bottle type containers for keeping clear and paint ? I can find plenty on Amazon but unsure of the spec of plastic so the solvents don’t melt it away

[@peteshobbies5383]

All you need to look for is HDPE bottles. They are completely resistant to solvent, so give no trouble at all 👍

[@Bubi0]

Hi I also bought Mipa CX 4 and how much air pressure did you use? I wanted to paint individual parts in the garage

[@peteshobbies5383]

Hi mate, on the DV1, I normally use 2bar, so 29psi. Obviously, it will depend on the gun. What gun do you have ?

[@Bubi0]

@@peteshobbies5383 SATA 5000 RP 1.3

[@Bubi0]

do you have a lot of dirt on the part after painting ?

[@peteshobbies5383]

@Bubi0 no, the quality of the air makes a huge difference

[@Bubi0]

@@peteshobbies5383 I have a SATA 5000 RP 1.3

[@Mikefngarage]

have you tried the Kapci Latica? IDK I have some that i am going to try on some fender wells because it is really cheap here in the US...

[@peteshobbies5383]

No, have never seen it, looks like it's not available over here in the UK, the Kapci 6030 is pretty cheap over here, they have just launched the 6050 UHS clear, haven't used it yet but it 50% more expensive than the 6030

[@ashshahzad6773]

Came across this channel recently and wanted to say thank you Pete. Very useful information you are putting out here. This video and the spray gun fan comparison are great. I noticed you use a infrared lamp to cure, is there a particular one you’d recommend?

[@peteshobbies5383]

Hi Ash, thanks mate, I really do enjoy trying out all the different stuff to see what the differences are if any. I use the lamp in the link below, I have 3 but normally only need one, this comes on a stand and you can put 3 on one stand or any configuration you want, i think most lamp are as good as any but this with a solid stand is quite good I've found and not overly expensive, there is no timer but i use one that's plugged in that i control from my phone if needed, cheers 👍 www.ebay.co.uk/itm/183164398908?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hQTh2-9uQlG&sssrc=2349624&ssuid=v5EZyL9iR9-&var=&widget_ver=artemis&media=COPY

[@ashshahzad6773]

Thats great, thanks Pete. I’m the process of doing some paintwork at home, so all your insight has been extremely valuable. Given that the colder months are around the corner, this lamp will be a worthwhile investment I’m sure!

[@peteshobbies5383]

Yeah, you'll definitely need something, they are designed to cure the paint after application but it's invaluable for helping warm the panels before you paint as well as after when it's cold, particularly with clear coat where I put heat before application then some 4 to 5 minutes after to allow time for the clear to flow out, most technical data sheets will give you a recommended time to allow before using a lamp 👍

[@ashshahzad6773]

Appreciate the reply and advice! Looking forward to watching the rest of your videos.

[@jamesmarques7245]

What is the minimum amount of clear that clear that you mixed to do the test panel??

[@peteshobbies5383]

Hi James. This one normally you mix 200ml and would use between 165ml and 190ml depending on the gun

[@davidray4655]

Hi Pete, what do you consider high solids clear? Over 40 over 50? Thanks

[@peteshobbies5383]

Hi David, normally over 50% with UHS being over 60%

[@davidray4655]

@@peteshobbies5383 thanks Pete. Learn something new today.👍

[@peteshobbies5383]

It's open to interpretation, some companies call a 45% high solids but most of the them are in the lower 50s, some call there clear a UHS when it's 55% but most of the proprietary makes of UHS are more, lower 60s

[@marcuslima2535]

have you tried Spralac SP4796? what you think?

[@peteshobbies5383]

Hi Mate, I've never used it so I can't really say what it's like, sorry

[@HPAcustomriflesandcerakote]

We had spoken before on another video of yours on the 4 Walcom guns I use to run before switching recently to the 3 Devilbiss DV1 guns. I have wanted to try Kapci 6030 high solids clear. Do you feel its decent stuff? I also have wanted to try Chameleon either their 178, or 180 both are high solids clears which i always prefer for the nature of the things I paint for people. So the Kapci is good to go?

[@peteshobbies5383]

Hi William, Yes, we were chatting the other day. The Kapci is a very good clear coat, particularly at the price it is. It flows out nicely, keeps a good gloss, and can be loaded if necessary without the worry of solvent pop. Only thing I would say, I know your in the US, is the hardener/activator is quite out speed wise, so unless you are regularly painting at say 85 to 90f the extra fast may be what you need, I find the fast hardener is unusable in the UK in the winter as it takes days to go off drying in the air, or you need to lamp it for ages, cheers mate 👍

[@terryrobins3867]

Hi Pete, I just want to pick your brains! Do you use a air fed mask or do you use a half mask with filters? Also what compressor are you using? Thanks Terry

[@peteshobbies5383]

Hi Terry, these are the masks i use, mostly these day's i use the Moldex for most things, your supposed to use the air-fed all the time for 2k, I only use it if i have a lot to do, link below, kzbin.info/www/bejne/mISpnXymhdR5gdk

[@peteshobbies5383]

This was my setup until recently, i now have 2 of the larger compressors linked as in the video, it works well and of course providing you have the power supply you can have both running at the same time, kzbin.info/www/bejne/j5-sm4KQeaegd6s

[@bosshawg7427]

Upol has so many different t clears that it's a bit confusing. Has anyone tested the UP2843?

[@peteshobbies5383]

They sure do, I have and use the 2080 and 2081, I know in the US they give them a different number for the same product which makes it even more confusing 🤔

[@bosshawg7427]

​@@peteshobbies5383 I use the 2882 for playing on panels. I lays nice, buffs ok and is cheap enough. For an overall, I'll take your advice and look for better

[@meguinness1116]

Did you add any thinner on the kapci clear coat? Ta

[@peteshobbies5383]

Hi buddy, it depends on the temperature, but generally, 5% to 10% is the norm

[@meguinness1116]

@@peteshobbies5383 higher the temp more thinner and vice versa? Ta

[@peteshobbies5383]

Normally, I go more thinners the lower the temperature, because in warmer weather the clear runs out better , when it's cold it doesn't flow as well so thinners helps it out

[@ivanivanov-rc2kv]

Hi Pete! What the best spray gun for clear coat :Devilbiss DV-1, Ani Black, Iwata WS-400, Walcom Carbonio 360, Meiji Finer Core ? Thanks

[@peteshobbies5383]

Hi Ivan, I've never used the ANI Black, i am getting one but haven't yet so can't comment on that one, of the others, which are all very good I would find it really difficult to split the Walcom and Meiji , i would also put the Sagola 4600 Xtreme DVR Clear right up there, i will do a top 10 Clear gun video so will have to make up my mind but they are all so good it's difficult

[@ivanivanov-rc2kv]

@@peteshobbies5383 Ok, thank you

[@peteshobbies5383]

Your welcome, hopefully i will get my ANI black in the next few weeks so will see what it's like 👍

[@user-paullynch]

Is the c1 cap the same as the b+ mate

[@peteshobbies5383]

Hi Mate, as far as I can see, yes, this explains it better kzbin.info/www/bejne/mqmlpmaqib6Xb7M

[@user-paullynch]

@@peteshobbies5383 thank you mate

[@peteshobbies5383]

@user-paullynch You're welcome, buddy 👍

[@saifulamri1829]

Sangat menginginkan senjata ini untuk melukis.

[@peteshobbies5383]

Mereka bagus, sedikit lebih lambat dari beberapa tapi bagus, sangat mahal

[@raedin4190]

Hi Pete, what mask you use when spraying clear coat to protect from ISO isocyanates?

[@peteshobbies5383]

Hi buddy, this is an old video but theses are the ones i use, i don't use the air mask as much as i should, I use the Moldex most of the time and the Devilbiss if I'm doing a lot, the key is to extract the overspray as well as possible, I have a 24" fan in a home made box with filter media that it pulls through, video is below kzbin.info/www/bejne/mISpnXymhdR5gdk

[@raedin4190]

@@peteshobbies5383 Thanks Pete, I will see that video, I'm concerned about this before I start my project. If you know of any ISO free paint, let me know please. I may end up using 1k. More research needed. So many ppl on YT spraying 2K without proper PPE.

[@peteshobbies5383]

Yes, i agree to an extent, there's lots of scary stuff on the web about ISO clears and paints, some are real and you do need to watch what you do, ofter stuff is just scare mongering, i read once a chap used 2k in his shed once and half his garden died, that's just rubbish, so yes, take care but don't get too hung up on it otherwise you won't do anything

[@mindaugasvaicekauskas920]

hi how much pressure you use for kapci clear thanks

[@peteshobbies5383]

Hi Mindaugas, on this test with the DV1 it was 2 bar at the base of the gun or 1.5 on the digital gauge, if you use a different gun the pressure may not be the same

[@CerberaM3]

Whats the name of the colour of the base coat?

[@peteshobbies5383]

Hi buddy, it a 2 stage base, TVR is the manufacturer and 9018 is the colour code, its lovely 👍

[@CerberaM3]

@@peteshobbies5383 looks nice 👍 I thought it was blue raspberry from nu agane, looks similar I’ve just ordered it to paint my TVR Cerbera with.

[@peteshobbies5383]

If it's anything like this it will look lovely, haven't seen Blue Raspberry, must be a new one of there's, I'll have a look later, hope it goes well 👍

[@vehiclesprayerssociety]

😍😍😍😍😍

[@peteshobbies5383]

Thanks buddy 🙏

[@cismoautorepair7061]

the first one by far