Clear Enclosure for 64ah Headway 12v Audio Battery

[@vaxt]

Link to Glowe Voltage. Nice to see putting old beef behind you!

[@jeremystover256]

Now we need you to design and sell buss bars for glowes batteries! Would be nice to see a set for 12 of glowes cells 😁

[@CD31337]

Could use some foam or something to occupy the rest of the space inside the case. Especially in any application that will vibrate.

[@eastwood111]

High dense rubber

[@vandela177]

All batteries should be made in clear container.

[@niktak1114]

A clear Tesla powereall would be cool

[@1969fallen]

Nice me my self personality I always use clear tool box tops for all my battery packs it’s a good idea 👍🏻

[@leadmonkey]

Awesome what about the paper you used, fish paper of something? Got a link? Thanks!

[@MrUnclebuc1]

will this battery stand up to the Texas heat without catching fire ?

[@LathanM]

I love this design. Do they make a smaller version of the case? I am thinking for a motorcycle application.

[@TrunkThunderLithium]

Unfortunately no. But I sell a battery the size of a motorcycle battery supports a 5k system. Perfect for baggers with systems or the car. LIFEPO4 20ah. All on stock alt.

[@MarkPrince1317]

Very beautiful brother Thank you very much for always the best informative videos Best regards from Philippines 🇵🇭☕☕☕

[@dbuck75]

I’m also curious what BMS would you suggest for this battery pack and bus bar?

[@djbudikane]

Did you use the screws that came with the cells 6mx1.0x8mm

[@TheTimshady337]

Awesome!

[@thesayayin365]

I built my first 64 ah lithium bank Can i connect to the front lead battery without isolator?

[@eastwood111]

Looks good 👍

[@jeffkrupke3810]

That is a pretty battery

[@jamesmason7124]

I'm looking for some of those red transparent heat shrink tubes for the Headway 38120hp cells , can you get any or do you know where I can get them

[@dbuck75]

What’s the status on the BMS board design for this bus bar?

[@vpowerelectrix998]

Jehu...when You planning Your audio build man😂

[@jehugarcia]

Too busy playing with batteries

[@eastwood111]

That’s for kids

[@MrUnclebuc1]

Can I put Kapton tape over the busbar parts that are exposed ?

[@jehugarcia]

yes

[@TheChuckwheat]

Thank you sir

[@slopoke22]

How many AH does a normal agn battery have and is this 1000 amps @ 32*?

[@slopoke22]

@titoham-DCXLs for sure

[@seancarwin8034]

I would like to know if this battery will be sold by you? I would buy it

[@jehugarcia]

No i sell the busbar only

[@davidcharles1601]

Would this 65ah be good for a 12000 watt system all taramps??

[@jehugarcia]

I’d say this is good for 400A so 12x400= 4800w

[@mihaiviorelvlad3201]

Hi i am calculating to replace my Civic Hybrid battery ni mh with 38120 heaway battery of 10Ah, voltage is close to the OM battery, the OM battery has a system of bms on each stic, should i try to use this system from the car that will check the voltage from 5 battery stik in series ? The total number of cels is 55 in series split in 11 stik with separated conection this should give me 199v and 10Ah with ~4 Ah more than the new OM one. What do you think will this work?

[@jehugarcia]

Try it

[@thesayayin365]

Will these buss bars work for 10 AH headway lithium cells ?

[@jehugarcia]

if cells are same diameter they should

[@capt.lennymiller6524]

New to this and have to ask, don't you need a BMS with these cells?

[@jehugarcia]

Not a must, it’s common for car audio setups to use balancers only.

[@tommykammers5246]

Not one of these videos say home to install cells to where they go and what's neg and positive

[@SunsetSlimess]

Wonder if your LiFePo4 LEV-60 would fit?

[@zaywilds3579]

only if you lay it on its side, which would still be fine imo

[@Beeeeeeeeeee]

How do you prevent overcharge from one cell? As every connection to monitor the pack is non accessible. The balancer will do some work but with a 5A+ charge rate that puny balancer won't keep up. Definitely not with used cells. Why not use a BMS and a contactor, the way it's supposed to be done?

[@jehugarcia]

Do it however you want, but despite your opinion there a lot of people successfully using these cells this way for years now.

[@markb1911]

The balancer works continuously to average out voltage drift, so unless the cells are so mismatched that they have drastic drift on a single-cycle bases, there won’t be issues. & if they cells are that mismatched, it’s probably time to disassemble the pack and re-sort, removing the most degraded cells to be used together in another pack for better match. Yeah, it may require purchasing a few cells but if someone already has invested into this setup, the extra cost isn’t that significant overall.

[@alexandrefausto7130]

Onde vende essas células?

[@jehugarcia]

Links

[@TheArchimedesEffect]

jag35.com

[@johnbuchman4854]

"Audio" battery??? For a boom box?

[@geogmz8277]

For big SPL systems.. It can do Boom too.. but I won't recommend it.

[@schade12]

We are waiting Tesla model s battery pack