Clearing

[@johnconner6443]

Very helpful I done it with no problem if I can do it anybody can do it. He did forget to mention one thing on the electrical connection or maybe a little plastic red tab that you have to slide over to disconnect the electrical I did, but that was no big deal it was all downhill after that. Thank you for your help. Save me a lot of money.

[@512TXSDIY]

You’re welcome and thank you for watching. Please like, share and subscribe.

[@mikefryman2617]

Thank you sir. Nice job. My replacement went smooth. 👍👍👍

[@512TXSDIY]

Awesome! You’re welcome Mike!

[@512TXSDIY]

Don’t forget to like and subscribe to the channel!

[@uriel-heavensguardian8949]

Thanks for sharing this video

[@512TXSDIY]

You’re welcome. Please like and subscribe.

[@aboogie4lyf]

im trying to verify where the vent valve is?

[@512TXSDIY]

The vent valve?

[@christyk.6929]

What to do if this doesn't fix the evap issue? Already did this and still not fixed.

[@512TXSDIY]

Tried resetting CEL?

[@christyk.6929]

@512TXSDIY Thanks, we found the problem we had to repair a hole in the top of the tank

[@noereyes6952]

I dont get any code error where my odometer is. Just engine light on.

[@512TXSDIY]

It doesn’t have a CEL?

[@leopaulino5171]

do you need to disconnect the battery ?

[@512TXSDIY]

I don’t recall if I did connected the battery here. Pretty sure I didn’t - watch the video again.

[@tyrelljohnson4677]

Any suggestions?

[@512TXSDIY]

On what?

[@Andrew-ll6sb]

What is that part called

[@512TXSDIY]

EVAP detection pump?

[@tyrelljohnson4677]

The clip on my 05 is tight and won't come out

[@512TXSDIY]

Hi Tyrell - the clip to what? The harness? If so, the only suggestion I would say is get some pliers but be careful not to break the clips fitting etc. because they it may cause more work for you.

[@daniellubic3584]

what is that seal called, can't find mine anywhere

[@512TXSDIY]

What seal? The rubber gasket that connects it all together?

[@stevehenson5737]

It's called the fuel vapor canister seal, I got mine at O'Reilly's ( part #EVCS01) for 6 bucks. For some reason the seal doesn't show up anywhere for the early 3rd gens but I ordered mine for an '08

[@512TXSDIY]

@@stevehenson5737 Nice and smart. Thank you for sharing the knowledge! Don’t forget to like the video and consider hitting the subscribe button.

[@txgaspimp9321]

Shouldb be a yellow o ring get from dodge dealer 3 dollars esim o ring

[@bobbyleeblmg8448]

Ohhhh Let me put this camera down🤣🤣🤣

[@512TXSDIY]

Huh?

[@txgaspimp9321]

Damg your model is easy my lowered 2018 ram was a bitch

[@512TXSDIY]

Yeah. It is easy on mine. Was yours more involved?

[@txgaspimp9321]

@@512TXSDIY ya it is located on the back top corner behind the heatshield so getting between rearend and drive shaft just cant see much and no room for my big hands

[@512TXSDIY]

@@txgaspimp9321 Dang. I get it. Your truck looks nice though. Don’t forget to like and consider subscribing if you haven’t already.

[@txgaspimp9321]

@@512TXSDIY thanks