Climbing waterfalls 6x6 Mini Truck First Trail Ride

Use code GHP for 20% off your onX offroad membership: webmap.onxmaps.com/purchase/o... Taking the 6x6 Kei truck on the hardest trails in North Idaho. Is this mini truck up for the task? Let's go off-road and find out!
Tims channel @timmuniz_
Download our folder & ride the same trail as us: onxoffroad.app.link/1HITPUgiFzb
[e-mail]
PO BOX 2370
Sandpoint ID
83864

[@X3R0D3D]

thing i learned today: "Cement is an excellent Soap"

[@EJ-74]

I dare you to bath in cement 🤣😂 You want have to worry about your skin being clean the chemicals will eat it right off 😂 I played in cement barefoot once when I was a kid, that was a BIG AZZ MISTAKE 🤣

[@OffRoad_Exotics]

Takes the skin right off depending on speed and pressure

[@fellenXD]

Well, fresh wet cement will literally turn all the oil and fat on your skin into soap. Not too far off i would say.

[@Sir_MaxD]

Must be a republican if you're that slow.

[@hendrianjayyy7395]

U mean semen?

[@timmuniz_]

Thanks for having me along guys!

[@SketiSquad]

Needs an exterior cage! But that thing is so sick!!! Loving the content lads

[@trexbait895]

Agreed 👍would look sick too

[@comethiburs2326]

and an extended bed!

[@SketiSquad]

And a snorkel!

[@HeartLessGem_]

Also a turbo 😏🙌🏾

[@Andy.Kobayashi]

Exocage & solid front axle would make it go harder

[@aswedishkid2492]

You should build a rollcage in it, it would look so sick and probably improve safety as well

[@everettstormy]

Weight would be a serious problem

[@recklesss117]

Exo cage would be sick

[@scottspropertyservices6877]

He’s already rolled it & didn’t get hurt so why bother 🤷🏼‍♂️

[@fursphere2]

@@scottspropertyservices6877 Exocage to save the body from serious damage

[@aswedishkid2492]

@@everettstormy yeah probably, but it would be a sick project and some nice free content for them

[@viajacob9521]

man you guys are my go-to channel, yall never fail to interest me in this type of stuff

[@devdsp0]

Welcome to the best six wheel driving channel on KZbin. Sorry, the best five wheel driving channel on KZbin.

[@FloridaMan0561]

The stuff that you guys build is amazing. Not only the unique builds but,the horsepower of the builds is absolutely ridiculous!

[@kaylor87]

I'm from Spokane, lived in Sandpoint for a couple years when I was younger, I always think about you guys! Also that truck should definitely get a cage ♥

[@user-hb7ci3cz5l]

Love the bit at the end at Sydney mine! That's been stomping grounds for my friends and I for many years. Keep up the good work, you guys are awesome!!

[@jamesamber6009]

This is the FUTURE. i Love it.

[@julesmarwell8023]

MAN;s ingenuity knows no bounds. amazing job you done there... how many ARB LOCKERS ARE US USING.

[@soberpoetify]

At 7:33 the bag in the back slides backwards as you go up an obstacle. At first glance it looks like the bag glitches out and stops moving

[@eriks.tech.trials350]

Your play way too many video games if ur first glance at a bag sliding in a bed is that it’s a glitch

[@leon_pp]

I had to rewind twice, once to check and another for the satisfaction.

[@epictimebreaker]

Mental issues..

[@studio4fifteen]

This is definitely my favorite build y'all have done so far😍

[@bonafide9516]

I dirtbike rigjt at those concrete buildings. I live in cda idaho, love Sandpoint. I worked up there for a few years. Love your videos and builds

[@mikey_mike]

If you turn the circular saw blade backwards, it will cut plastic better.✌🏼

[@robertnorman3181]

And use a finer tooth blade.

[@nicholasshank3402]

or a jigsaw

[@mdemers767]

You can cut through tin and sheet metal that way as well. No sparks!

[@paularmbrust2134]

I had an 87 Toyota 4x4 minivan. Not the most capable, but never driven a more fun road trip vehicle. All windshield butt over the front tires is the way to go

[@nathenstram6697]

I loved the bike burnout in the bed whilst wheeling. I almost thought the national anthem was playing. Beautiful

[@SlashBleed]

"Cement is an excellent soap" -Ethan 2023

[@TheCluelessEnthusiast]

Looks like heaps of fun. Cool little rig

[@robinroy3555]

This vehicle has Amazing weight distribution. Marvelous

[@Hobbies4Hire]

Great job on the video folks! Thanks for making it.

[@VirginiaMaker]

Before your next adventure, and after repairs, I'd recommend you install a rollbar, 2 spares, a small toolbox, and a couple of CV axles. But, great video. And that Kai truck is super capable.

[@reddog543211]

Amazing video guys.....premium footage !!!..... thanks for sharing this with us

[@samwake196]

Genuinely mega impressed with that plexiglass windscreen.

[@intricateinc8566]

Another *PREMIUM* Grind Hard Plumbing Co upload.

[@Superbowfin60]

I drove a cab over Mitsubishi Fuso bucket truck for a cable company. I loved that thing they were so easy to maneuver and get in tight places.

[@charlesfletcher1629]

The ends will come off your spoil of 550 cord. Take two 4” thumb-size sticks with mild groove in their middles. Tie some of the cord to each groove, leaving two strands through the center axis of the spool. Twist the sticks in opposing directions, tightening them against the outsides of the spool. Friction will hold them in place, securing the ends of the spool for rough handling. Do it.

[@stevo43068]

Enjoying Life, living vicariously through you all, keep it up fellas 😁

[@timdiener7017]

When cutting plexiglass turn the blade around on the saw! We do it that way all the time and it’s way easier and smoother!

[@HulluJanne]

PPF would probably be a good option for plexiglass stuff. AFAIK, it's super prone to scratching as is.

[@levisilva3192]

It does scratch but you can always pull out the buffing wheel and make those go away.

[@goosenotmaverick1156]

​@@levisilva3192 for the use case they have, it's gonna need to be buffed weekly lol you're not wrong, it's easy enough, but it might still save them some time in the long run and keep it a little easier to see for a while longer between buffing sessions

[@lachieslife2395]

Anyone else see at 7:30 the bag in the back of truck defy laws of physics for a moment? 😂

[@deferte]

Now we need metal bumpers, skid plates, nd over cab rollcage, like on that black Tacoma

[@StanleyKubick1]

windshields are structural components in most cars and help support the roof in the event of rollovers. Usually add roll cages before they add "lightweight" windshields

[@BelamarEutravos]

My dream vehicle is the Jeep Mighty FC... COE or FC vehicles are generally regarded as unsafe during head on collisions. But you're absolutely right that they are the pinnacle of performance while off road.

[@chrisoakey9841]

A thin disc grinder, or circular saw with only the teeth going beyond the guide, both work well for cutting plastic. I usually use the grinding wheel for any curved piece and saw with aluminium cutting blade only for straight cuts. If you tape the back edge you get a better finish.

[@pigsniff1014]

I absolutely love videos like this keep up the blood sweat and tears guys!!

[@effervescentrelief]

It's funny this came into my feed, I was just watching 8x8 European big rig offroad trials.

[@CLCIII]

Super capable 6x6.

[@Ash1978E]

Just cuz concrete is my gig. Cement is an ingredient in making concrete. Love the channel. ✌️

[@ipoopmuffins]

hell yea, love the wind shield

[@bigfuzzy84]

The maintenance at my place has the 4 wheel versions of these. I've seen them effortlessly climb steep snow covered hills and blast through 2 feet of snow.

[@coodergreasermafiac.c.5689]

A sweet exo cage tht ya still b able to load pwerwheels n the back b perfect weekend trail beast

[@rogergrant62]

That is easily the coolest thing you guys built. Needs a tool box on it somewhere.

[@goosenotmaverick1156]

I've always thought right below the back window was a perfect spot to put a box. No visibility lost out the back, and if it was full bed width you would have all the room you'd need, and still room for a cooler, a jackery power bank and a couple spares even lol

[@X3R0D3D]

and maybe even a small hydraulic picker!

[@reddenley9822]

Wow! It's unstoppable. So cool.

[@draggonhedd]

Tip for cutting plexi with a circular saw, flip a metal blade backwards. Cuts it like buttah

[@kutz0420]

Man I''ve been dreaming of an offroad cabover for so long. The mini size and it being 6x6 is just fucking rad. Nice build sir.

[@jdshaw2751]

Denver Creek used to be challenging, but so many people have run it that it's turned into Disappointment Creek! Now that you've Way Pointed it on OnX, I'm sure it will become the next route of I-90!

[@evanjordan7734]

That's super funny. I used to run around that trail and hangout at that old mine when I lived around that area!

[@mikes78]

I was trying to figure out what all those structures were. My guess was a mine, thanks for confirming. I'm guessing it was abandoned in the 70's or possibly the 80's it so, not that it matters. This video looked awesome, that little 6*6 is turning out to be more impressive in each video it is featured in.

[@a-aron2276]

Watching it wade through the first stream, I'm like damn, a snorkel would've been class.

[@JippaJ]

This thing is so much more capable than 99% of all pick-ups

[@crazymtbrider]

Epic as usual with u lot love the burnout in the back on the surron 🤣

[@euphoric5172]

this kei truck is awesome now, it just does everything easy.

[@rajamohdnaimrajanazarudin8623]

Next upgrade is tipper bed, wheel arch, roll cage in the cab, a snorkeler , performance exhaust system, led lights bar and last but not least is a proper paint job with Grind Hard decal

[@Yayabinks]

This next to the hoonigan mini truck at seam would 🔥🔥🔥

[@eastoforion]

thats the coolest thing offroad trail i've ever seen

[@dickdegraaff5452]

You guys really have built a powerful small 6x6. Hope the tight hand front wheel drive can be repaired. Send you love from the Netherlands

[@Hellsong89]

Technically they didnt build 6x6, just did body swap, but that on its self is pretty hard on its own. Too bad cost of 6x6 has went higher due videos like this, so no god damn chance getting one for price i could build anything like this.

[@rickles583]

Alright its settled I live way north an hour from Canada due north and guys I just need one of these ,forget a side by side keep the jeep This rig absolutely makes those boulders and downed trees and logs look seemless. Bravo dudes favorite project yet honestly

[@johnjosephson9277]

You know it's just a shortened 6x6 polaris ranger? Like I assume the standard vehicle is only a bit less capable due to being a bit longer. Not that it isn't cool or anything.

[@rickles583]

@@johnjosephson9277 the simplicity is what makes it so cool in my opinion

[@CoronadeDeus]

7:30 awesome optical illusion haha

[@JacquiPenar]

You guys content is unmatched

[@KING_PHILLIP]

*Been talking to everyone i know about this build. This thing deserves to be manufactured and sold as an emergency/rescue vehicle in hazardous environments around the world* 👏😤

[@Yourcarrot-xc5ru]

I loved the Surron in the back

[@yannicschmid8961]

SOOOO AWESOME

[@chrisoakey9841]

I recommend you put a laminate on the outside of the windscreen like 3m stoneguard to reduce the risk of scratches. Perspex is not so good at resisting scratches. I would love to see you beef up the suspension and make it airride.

[@akumabito2008]

This lil truck is your coolest build :)

[@youknowwithMartyKauffman]

This is so cool I want one of those so I can do all that off-road stuff

[@ninkendo7714]

Super cool 🤙 pretty bad when will is offering you gloves to be safer. Like I said before I almost think you should build kits to make these.

[@mr.anonymous3978]

Gi grind hard I seen someone say to build a roll cage and you should but on the outside of it to keep the truck cab from getting tweaked more

[@GRAFFREVIEWS]

Reminds me of a mini Stewart & Stevenson military cargo truck. Would be awesome to see this thing painted in desert tan 686 or olive drab green. Throw a snorkel on it, make some detachable D shaped bars for the bed and get a canvas cargo cover for it.

[@aricm2164]

This looks like pinehurst, I live really close to that. There is thousands of trails up here specially near Wallace. I’ve been to that exact mine so many times

[@steeldarling5116]

I think the most impressive thing about this is that it just looks *right.* Like it was always meant to be like that.

[@lennyross2813]

I believe you guys are close to Blackhills. Some of the best trails in the US there. That is a true test of the lovable k 6x6! 🙂

[@isaiahryan279]

Anybody else feel like they had to pull a piece of glass out of their hand when he did that!?!?

[@kellencarpenter6296]

Just found my new favorite KZbinr

[@davidowen888]

Exo-cage would be kool 👌 Excellent Job on that one Ethan 👏 👍 ☮️

[@prajwalwalke5504]

Love from 🇮🇳India brother❤

[@Ben-311]

Another premium banger gentlemen!

[@SoSoOscar]

Couldnt you get an extra portal axle and make a 6x6 with the mog chassis?

[@WalterPidgeonsForge]

If you flip the blade on the circular saw it will do 100% better with Plexiglas or Polycarbonate.. use Polycarbonate when you can .. it is much better optically, stronger against impact.. and far safer in a rollover or accident. Thanks for this build.. I have a 2004 Polaris RANGER 6x6..

[@Adventure_Van_Upgrades]

ohhh man this ones gonna be sick !!

[@ambergris5705]

It's got a great Haflinger vibe! With a bit more power though 😂

[@savvykronik4192]

Well you should do is put on jail glass. The glass with the wire in it so don’t shatter completely. Then put hinges on the bottom like a Jeep Wrangler so you can fold it down and you can see

[@repairtech9320]

9:10 all those push-ups are paying off 💪

[@jimfilmont3833]

So freaking cool!

[@scottbruner9266]

I love the plexiglass windshield. A few years ago my girlfriend rolled her Camry. I put in a plexi one, till we could find a affordable replacement. She still drives the car……

[@fixit5897]

Glad to see that you made repairs, so don't go out and act like a fool again, thats a nice little truck and deserves some respect.

[@leandrobrun.r]

Viene ay tremendo video como siempre saludos desde Uruguay ✌️😉 y todo el aguante como siempre 💪

[@jessiesanchez4690]

Should make a complete rollbar for the outside of the Cab . And a Awesome front Bullbar bumper.

[@jerickireland4099]

I run Denver creek, red cloud, and Sydney mine all the time! Just a few miles from my house

[@EJ-74]

That thing is so cool 😎

[@Adrianzx]

I watched some good content today but I know this video is going to make me happy

[@allenaddy120]

That thing is so cool. I want one great job.

[@Mireaze]

This really shows how unnecessary those huge brodozers are for off-roading, or on-roading, or anything really

[@ashleysutcliffe2157]

No discredit to the other amazing things you build but the 6x6 kei truck is my favourite

[@Renoh74]

1:05 A regular wood/metal blade is a bit grabby in hard plastic. If you put the blade on backwards it won't be as grabby and can still cut decently (watch out for melting though).

[@KillaMTB]

I think you should build and exterior roll cage for it would look sick and be a lot safer when it rolls 👌

[@batmansdad3195]

I've never cut plexiglass, but I do know with the aluminum soffit we cut at work we turn out blade around. I'm not sure how a grinder would work either?

[@goosenotmaverick1156]

Grinders tend to be too high speed and do more melting than cutting regardless of what kind of disc gets put on them. There are a few that work alright though. They're carbide coated and have big reliefs between sections to help reduce the amount of heat buildup. They work alright. A router sometimes works well depending on the thickness. That's always good when you need consistent radius somewhere. I'm no expert but I've messed up my fair share of Plexi/lexan products doing projects at home lol

[@thor82ak]

Should've wrapped it! Neon pink!

[@IrishSpyHD60]

You guys absolutely have to add a roll cage and believe it or not there are portal axles for these!

[@dileepdilee1834]

Building quality level 👌🏻

[@peterhelmer396]

Just a tip for putting out battery fires in ev's. In Denmark, the fire department has waterproof containers. Then they just use s crane and dump the ev in. It reduces the water consumption immensely