Great video! Where did you download software for this? Thanks
@stevesisson4886 Жыл бұрын
Thanks man!
@yevgeniykostenko Жыл бұрын
Thank you for information
@MMorsiiiii Жыл бұрын
Did you try to chang the vin. And what happened?
@chritianoliva3750 Жыл бұрын
Hello buddy is there any updated version of iO terminal or you just update the device ?
@hardend176 ай бұрын
Master I'd clone my BCM..(flooded) retrieve bin flash data...my key work remotely...but Anti Theft Det... ON... No start...everything been flash & eeprom.... What can I do
@partoems9376 Жыл бұрын
Why you going for IO terminal? Is it because of new techline connect updates to prevent used modules?
@globalcommerce7654 Жыл бұрын
IO Terminal and other tools allow you to clone or modify ECMs when the manufacturers don't allow it, some of these parts can be backordered, not available or just too expensive, also sometimes the OEM tools themselves fail at some programming, these tools gives tech more options and in some cases faster ways of getting jobs done.
@شريفالسودانيكهربائىومبرمجسيارا Жыл бұрын
The IO PROG SOFTWER WORKS WITH THE SAME I\O TERMINAL SOFTWER ?
@globalcommerce7654 Жыл бұрын
Yes
@lusakomichael1579 ай бұрын
What about Delphi ecm is compatible with which one of the acdelco E series?
@edgarasa7445 Жыл бұрын
Great video
@globalcommerce7654 Жыл бұрын
Glad you enjoyed it
@landonhoggard37587 ай бұрын
What is the best tool for cloning right now in your opinion? I manly need it for Gm. I'm currently working on a SRX with the E39.
Hi did you ever find out about the editing of the vin for sps programming ? i notice here in the uk the flash has the vin is in 3 locations as well as 2 pin number locations and in the eeprom the vin as you say is in 2 locations as well as 2 locations for security pin. I ve tried editing both eeprom and flash , to SPS them but still dont have success. regards Joe
@globalcommerce7654 Жыл бұрын
Hi, subscribe to the channel, I have new videos on this!
@MattBrittian-bj4tf Жыл бұрын
I can’t find your new videos on this
@globalcommerce7654 Жыл бұрын
@@MattBrittian-bj4tf Try this one kzbin.info/www/bejne/a3fYoKlrn7yJg80
@mohammadalamin208 Жыл бұрын
Why we need to clone BCM Sir. And what it cause to the car if it's goes bad? Any kind of help would be appreciated thank you Sir.
@sara781304 ай бұрын
Some. Times. On ople GM battery go flat bcm damage software
@nfd7034 Жыл бұрын
Hello. How can I use it with TCM Read with bech 6l90 transmission, with this I/0 prog
@MattBrittian-bj4tf Жыл бұрын
Did you find a solution to reprogram a vin without the original ecu?
@globalcommerce7654 Жыл бұрын
Yes, like and subscribe and check my new videos!
@bobbywarthan5173 Жыл бұрын
Can IO terminal clone the older Delphi pcm?
@mariuslupascu7134 Жыл бұрын
Hello, what software do you use for IO Prog?
@starautolocksmith4841 Жыл бұрын
Did you pay extra card activation with this programmer? I try to buy it from alibaba but I'm afraid not working. Can you advise me from where I can buy it with all functions working Thanks in advance .
@autoteq299 Жыл бұрын
goto ebay
@tallerdiagnosticoautomotri2627 Жыл бұрын
Hi, how can activate GM model read and write data on FC200, you can help me please
@abdullahalzuwayed8211 Жыл бұрын
its work in lock ecm 2021 yukon?
@Snake.br549 Жыл бұрын
How do it know?
@tallerdiagnosticoautomotri2627 Жыл бұрын
Hi, excelent video!! you can help me? i need install the software for i/o prog but dont wokrs you can send the installer please? sorry for my english 😅
@JoeJoe-l5d10 ай бұрын
Hi, is this a clone io prog or original ? Thanks
@globalcommerce765410 ай бұрын
Clone available at Globalcommerceca.com
@Darussalam-n4l2 ай бұрын
Please sir I just got one io prong terminal, please I want you to show me run it on PC sir
@globalcommerce765416 күн бұрын
Congrats on getting the IO Prong terminal! To run it on your PC, you'll need to install the software that comes with it. Once that’s set up, connect the terminal to your computer via USB, and you should be able to access its functions
@excelautobahamas2425 Жыл бұрын
This can clone any ECM for all makes?
@globalcommerce7654 Жыл бұрын
This tool that I will be offering is ONLY for GM/OPEL vehicles.
@segounlocks5029 Жыл бұрын
Does it do gm global A bcm or ecm
@globalcommerce7654 Жыл бұрын
Yes
@segounlocks5029 Жыл бұрын
@globalcommerce7654 people that probably never probably even used it likes to say oh its gonna brick your bcm blah blah. When it's obviously running the same software. And for the price of io terminal full I'd rather just buy new module and spend 50 using sps before I put thousands into io terminal
@heinebester5049 Жыл бұрын
Can you clone the TCM module ( 6T30 GEN1 ) of Chevy Cruze 2011, and have dead TCM that failed on SPS2 and no communication after that.
@andresbarreiro90498 ай бұрын
Got any virgin files?
@Marc_Wolfe Жыл бұрын
$340 ... for fuck sake
@Marc_Wolfe Жыл бұрын
What keeps some arduino CAN module from being usable, besides nothing?
@globalcommerce7654 Жыл бұрын
@@Marc_Wolfe using the arduino module for what exactly?
@Marc_Wolfe Жыл бұрын
@@globalcommerce7654 Letting your laptop software communicate with the ECU. There are hobbiest priced microcontrollers that include CAN; when I remember and verify which models, I'll be sure to reply.
@Marc_Wolfe Жыл бұрын
Teensy 4.0, should only need a basic level shifter added, then the code.