Cloud's Fusion Sword - Final Fantasy VII - DIY PROP SHOP

Awe-Inspiring Videos ►► Subscribe! brrk.co/AWEsub
This week Odin will be showing you how build Cloud's Fusion Sword from Final Fantasy 7!
We build so many amazing weapons and props, we wanted to offer a show where you at home could build them yourself! Follow along with our hosts as they show you how to build awesome props from all of your favorite movies & games, for under $50! This is DIY Prop Shop!
Here are plans for the sword: bit.ly/2h2XE4D
Hosted and Edited by Odin Abbott
/ odinabbott
/ odinabbott
Camera by Neil Cohen: / neil_s_cohen 916creative.com
Tell us what you’d like to build next!
Get AWE me Gear! ►► brrk.co/AWEmeMerch
If you rely on the information portrayed in this video, you do so at your own risk and you assume the responsibility for the results. You hereby release Defy Media, its affiliates subsidiaries, and any person included in this programming expressly or implicitly from any and all actions, claims, or demands that you, your heirs, distributees, guardians, next of kin, spouse or legal representatives now have, or may have in the future, for injury, death, property damage, or any other liability that may result related to the information provided in this video.

[@firefliesburntheworld]

Thought this was Man at Arms first and got excited then realised it was Prop Shop then saw Odin and got excited again.

[@Dukefazon]

Congratulations, Odin! This turned out really-really good! I really like your work.

[@AnimatorsatWork]

Dukefazon HE'S THE MAN!

[@Scarorion]

Yeah it did turn out really good the blade is awesome i'd love to have it in my room :)

[@sajjadyousif610]

Dukefazon 4);:😳😳😳😳😳😬

[@mscorp6]

Dukefazon b

[@grandimations7309]

Dukefazon I know he messed up on the Handel but it still looks great

[@michaelternosvky4215]

I've recently finished making my own fusion sword based on your tutorial. It took me roughly two months and I'm really happy with how it turned out. It was a great experience for me and I really wanted to thank you for your tutorial and providing the necessary steps in making the sword.

[@Kayakasaurus]

Prop shop builds keep getting better! Good job. PVC lightsaber with polycarbonate blade please!?!

[@thesparewheel]

damn i was expecting man at arms.

[@fernandocruz8369]

they already did the buster sword

[@user-xm7de1zo7g]

Fabián Cruz Ho but they need to do the fusion sword. 6 swords in one sword. like a special 3 part episode

[@kratchet559]

aye but the fusion sword would be a good episode as you have a lot of moving parts and getting all individual swords to connect to eachover, I'd imagine it would test their brains a bit. Would make one hell of an episode though

[@jamerous58gilliam]

thesparewheel it's all good. creativity wins anyway.

[@dragoongalaxy20]

thesparewheel man I thought the same! 😂 I was like hell yeah finally... wait a moment... 😑

[@Py7h0N357]

That is by far, Odin's bestest work, and that's saying something, because all his pieces are great. EXCELLENT job, and THANKS for the tips!

[@georgedupond5708]

I truly love the fact I dreamed recently about doing a prop like that but I knew for sure I couldn't. And moreover, I had the Awe forge Buster Sword in mind too.

[@georgedupond5708]

(Maybe I wouldn't do it this year or in 2017, but I will do it for sure)

[@BlackKnightOfTheWind]

You, sir, do your name of Odin justice for this is a godly masterpiece.

[@TheLifestream]

Really awesome work, Odin. I love seeing stuff like this. Thanks from everyone in the FF7 community.

[@NeedMoreMushrooms]

Well, it doesn't break the bank, right? But will it break limits?

[@NessKwik0]

I sure hope so

[@dv4794]

Ohh... I see what you did there...

[@j4ys0n]

*Access Denied*

[@finnsobejko5414]

a decent joke

[@shelbybayer200]

Lol

[@mordhorst15]

Odin is so great at this, honestly the cast they have now are all pretty good

[@maialen1508]

This is so AMAZING! I love everything you do, Odin! Keep up the good work!

[@BurstFlare]

I want to see an actual Fusion Sword made of metal.

[@anus_mcfart3]

Burst Flare they actually sell them online. Not the best quality (meaning I wouldn't use them in any combat situation lol) but they are all metal, and break down into all the individual blades. If I can find it again I will post the link so you can check it out.

[@BurstFlare]

matt fuller Okay.

[@anus_mcfart3]

Burst Flare I found one on etsy. I cannot find the one I saw when the movie first came out. It was a Japanese blacksmith that documented the entire build that a customer requested. If you search google for it you may have some luck. Not sure if you just appreciate the craft, or are looking to obtain one. But you can find both with a little digging. Here is the link for the etsy add I found though just in case you were curios. www.etsy.com/listing/399954065/full-size-hardened-steel-clouds-buster?gclid=CJ3e_4-41tACFZQ7gQodpkkCvA

[@BurstFlare]

matt fuller Um... That's the Buster Sword. What I want is the *Fusion* Sword.

[@anus_mcfart3]

Burst Flare apologies, I copied the wrong link..I was in a hurry because I probably shouldn't be using my time at work to look these things up..but it's Friday lol. Anyways, if you look hard enough you can find blacksmiths in the states that will build you one, and even some that are already built and available for purchase. Sorry again my man. Enjoy your weekend, and happy hunting.

[@PedoPlueschi]

This build gives a new Definition to the word "foam sword" :D

[@ChillyJack]

This is pretty freaking awesome. Odin and Man at Arms are what keep me coming back to this channel. I'd really love to see a Two Become One keyblade. Would be really awesome from either Prop Shop or Man at Arms.

[@KntckyFriedChkn]

I think this might be your best work yet, Odin! It could def use some refining, but by simplicity's terms, this came out amazing!

[@LordHoth_09]

Always happy to see Odin doing the build

[@miesgang4641]

Hi, could you fix the link to the plans? The link doesn't work anymore ^^'

[@masonjones]

Odin you're my favorite I dunno why you're just super happy and I love it

[@aarontom]

definitely one of the better builds of this season in terms of price range and skill required. great job, odin!

[@TeddyBarefoot]

Please can you make a star chip glove from Yu Gi Oh?

[@MrYubel54]

More The Duel Disk

[@TeddyBarefoot]

***** I want them to make a star chip glove so that I can see how to make one myself.

[@nightdagger3234]

MrYubel54

[@cloudstrifed1]

For a prop sword that looks sick good, job on it!

[@camilogaming6414]

This es pone of the best tutorials I've ever seen! Thank U so much for doing it

[@Emily-fp8nh]

Wow! They actually give you plans for this!?? Best DIY shop ever!! Ty.

[@ZekeAxel]

Does this mean Man At Arms won't make 6 swords that meld into one?

[@paulpereira7735]

StarTsurugi I don't think they won't do it, it's more they still didn't figured a way to do it but I don't really know so im just speculating.

[@jbuenaventura7647]

a kid was able to do it. but with wood i think. But disregarding weight, I think it's doable

[@ZekeAxel]

I think weight is the deciding factor here. Kind of like they did Guts' pre-Dragonslayer sword, knowing full-well, everyone was requesting the Dragonslayer.

[@jotasm6630]

michaelcthulhu is your man

[@tangtaster]

Like the video as soon as I saw Odin

[@mocagami]

Good gosh, that thing looks awesome! I hope I can get around to it when I'm not as busy. Thanks for the tutorial!

[@JackMacLupus]

Damn, this is one of the best Fusion Sword's i have seen till now! I'm TOTALLY eager to build something like this too.

[@Agel1ic]

one of your best works

[@LilithLonelyHeart]

Geez i would like to see it at Man-at-Arms, i know they made Buster Sword already but this one looks even more awsome

[@FayinKay]

If Man At Arms did this buster sword, it's gonna be heavy just like that Dark Souls one

[@SetsunaKisetsuki]

Fusion Sword* Buster Sword is the one that angeal gave to zack then zack gave it to cloud

[@Skuimpie]

At the start I would have never guessed it would come out this good, amazing job man! Maybe we'll see some sick cosplayer with something like this soon.

[@CommanderCool76]

Love your builds. I so can not wait to finish my garage make over and start some prop building.

[@marcospaulomezzetti432]

Good evening, you still have the plans to build the sword, the links above are no longer available, thanks

[@KingJake-om7yq]

What if someone reads this in the morning?

[@lileenleen]

lmao been waiting for this for 5 years

[@crow2535]

holy cow Odin it looks amazing! (or should i say AWEsome :P) allways a pleasure to see your creations!

[@PhaseLotA]

God he's good. Love Odins stuff. Quality builder. PS: That weather job was superb. I often feel like many people go to far with that step. Great build this.

[@destinyedwards4762]

That is so cool.

[@Cainyadigit]

I love this guy's show, he's Tim Allen in a nerdy Tool Time.

[@EmDragon]

This video helped me alot, when I made Kirito's black iron great sword. I used the same technique and it worked like a charm, so thx for this

[@HigorSD]

Holy sheep... man, this is just AWESOME! Congratulations! Really nice work, Odin.

[@TheFancyUmbreon]

Wonder how much of a pain in the ass it'd be to make that sword have 4 blades that can all come out instead of just looking like it.

[@Sethiroph]

Full sized? Quite a pain. I somehow managed to make a small k'nex version of the sword with each of the blades able to lock into place.

[@TheFancyUmbreon]

MaskOfSethiroph Nice. I don't think I've seen or heard of K'nex in a LONG time XD

[@Sethiroph]

Thanks. K`nex doesn't get as much attention as Lego, which is a bit of a shame.

[@TheFancyUmbreon]

MaskOfSethiroph Yeah. There was a decent amount you could do with K'nex than you could with Lego. I think you were able to make motorized vehicles with them at some point.

[@Sethiroph]

A couple of the K`nex sets I have allowed you to make motorized dinosaurs. I also have an old Lego motor set, but it doesn't allow as much freedom as the K`nex motors.

[@SaikoX95]

I love Odin as much as the next guy but, I think Man at Arms should have its own channel.

[@Ranstone]

Your wish is granted. Welcome to 2019. XD

[@JeremyWT]

I still love this video

[@ShimaMiku]

Odin, you are the most legit. I love what you do with these props!

[@phoenixt9622]

noti sqaud where yall at

[@keeperoflenneth]

"And then i thought about how i was going to get that exact look for the handle. ..... And i was like F** that and used hockey tape!" :D Teasing, lol i would have done the same thing.

[@tom5890]

Hurray, my favourite time of the week!

[@BlackHei711]

Best episode yet. Love Cloud's First Tsurugi.

[@slicer1419]

why didn't he use red hockey tape...

[@black_winterr]

That's what I was wondering lol. I'm making this sword for my sister, but I'm gonna use red hockey tape instead lol

[@Ranstone]

The red is the best part.

[@markusreynolds1376]

Red hockey tape is awesome on things other than a hockey stick

[@mycabbages3538]

This wasn't Man At Arms but it was still pretty awesome!

[@cybertwingo]

Whoa, it's Odin? Then i know it's gonna turn out great for sure.

[@Xballawanaka]

your stuff is always the greatest Odin

[@civicg7mostwanted]

Pls do Kingdom Hearts "Keyblade". Think it's the only weapon that I would do, cuz I really like KH.

[@RizK1_]

Tiago Farias good one dude

[@disturbedsurvivor7778]

Make something from RWBY. Crescent Rose, Qrow's scythe or the Ember Celica would all be great builds.

[@victorjuanpuig371]

I LOVE your work; really. Thank you very much for it.

[@repeargamer3073]

It might look simple but,the imagination and creativity is amazing.Keep it up.

[@theodreer1356]

Try making a Monado Sword from Xenoblade.

[@dddasan5399]

That would be amazing ^_^

[@G_Smith150]

Théo Dreer I second this along with noctis engine blade or sword of the father

[@mintmeiyin]

This FF sword is really amazing!😍 I hope you guys can make the Cresent Rose (Ruby's weapon)from RWBY☺

[@mizzonesama]

i really hope they make it too

[@felixdietzCGN]

Odin makes the best DIY props!

[@MrCrosserdog]

by far one of my favorites big thumbs up

[@Advocate_INFJ]

this guy is the best out of all the shitty DIY shop hosts

[@mrtoolegittoquit2]

agreed! Shouldn't you be off looking for the Infinity Stones though?

[@KCzz15]

All 3 of the current hosts are great, imo.

[@wadewilson3309]

mrtoolegittoquit2 no cause I HAVE THEM!

[@FEBRIZIOtv]

Amplify that chick is kinda eh

[@yarry6952]

Vinny is the best, Odin is mediocre, and Whats-her-face is sloppy.

[@elvisdinh1243]

I like this project but the only problem is that I don't have a orbital sander. Any alternatives I can use?

[@alanysgriffin5257]

Snowstormz619 I was thinking the same. Maybe if you were really precise, you could cut it down a bit and use the foam sander...

[@rebelboy9422]

Snowstormz619 or if you have a belt sander that’ll work

[@lmaoineedarainforest6157]

Is sand paper ok?

[@elgaschi]

Incredible as always Odin!

[@alfas9591]

honestly im a lilbit sceptical at first , but the result blooooowns me away !!! thats crazy dude !!!

[@moonknightfighter2233]

Could you please put the file back? It says it's no longer there.

[@inky2412]

yeah, same for me

[@TheRealAlpha2]

heh, I bet the guys are Man At Arms wish they had it this easy making Cloud's swords.

[@cobbsbubbles3075]

Awesome man! Thank you so much for this tutorial

[@leonandthegreenarmory6586]

I'm gonna try making the first version of the buster sword thanks to watching this video, so thank you Odin for making this video.

[@squallleonheart6575]

how much was the total cost? i would love to have this in my house ^^

[@AlexxxMYLSince2013]

do the "Ends of eart" keyblade from kingdom hearts birth by sleep

[@severodanilo]

sword of obedience silente hill 4.

[@AlexxxMYLSince2013]

Ive been here since they did the master sword that was a lot of years ago XD I just want to see how is done to make one for me

[@Serox1707]

alex MYL same here but I want to make a foam katana

[@tokoyamirey4840]

Id. . . rather see that made out of metal. . .

[@dustinriedel1292]

love watching your episodes Odin! looks great

[@nikumeru]

Looks great, nice job!

[@10N1Z3D]

could you please attempt to build Crescent Rose from Rooster Teeth's RWBY? thanks! 💗

[@WanderingHeroZayra]

please can you make Ike's (Fire emblem) shoulder armor and/or sword? (the young Ike) it's quite easy but that would show how to build a shoulder armor.

[@TheRichardSilver]

If it's armor you want, let them go for the Black Knight or Zelgius's.

[@SmolDragoon]

MRfacocero yes the Ragnell would look amazing!

[@RaiOuArt]

holy crap, Odin this is fantastic

[@skar02]

Odin is mad enthusiastic, it's dope

[@thehanzomain386]

Please do one of Ezra Scarlett's Weapons

[@thehanzomain386]

From fairy tail

[@dense4767]

the Omega yato from Fire Emblem fates

[@_BlaXEr]

Amazing, great work!

[@archabaddon]

Outstanding. Now I want to dig into some foam projects :D

[@BenDover-br9tp]

Make a sword of Croat from destiny!!

[@snowyalbert7231]

Since this is just a diy. Since i have ALOT OF METAL IN MY HOUSE. leTS MAKE A REAL ONE TO CHOP OFF THIEFS HEAD LIKE A KATANA.

[@Ranstone]

I read "THIEFS" as "Tifa's". O-o

[@meloneh5394]

for some reason this is one of the most down to earth props ive seen in the prop shop

[@mandomizer]

This is actually legit and good quality looking sword you made.. very nice!

[@LetsJays]

Step one: get a blueprint of the sword printed out. What?

[@xxzenn01xx9]

yeah, i often wonder my self where they get these giant prints from.

[@FayinKay]

Usually I go print giant paper stuff at my local printing shop

[@BlaiseArath]

I'd just like to know where to find said Blueprints to bring to get printed out... Thankfully they put all that stuff in the description.

[@El_Andru]

Do you guys read descriptions? you should more often before commenting

[@hugavet3049]

Office max wanted 3.95/sf = $40.00!

[@ThePaddyfro]

That's amazing! So trying that!

[@LizThatsMe1]

THANKKK YOUUUUU. cloud is my favourite

[@grandimations7309]

DANG IT!THE HANDEL IS RED & IT HAS A DIAMOND PATTERN ON IT!WHY DOES EVERY CREATOR MAKE THIS MISTAKE?!?

[@grandimations7309]

HIS HANDEL IS BLACK & HAS NO PATTERN X(((

[@grandimations7309]

I misplelled Handle :T

[@grandimations7309]

I misspelled Misspelled.

[@FayinKay]

Chill man, he used hockey tape for convenience and he had it with him already.. If you want it red, make it red then

[@golnectr]

Agreed, after all that amazing work and detail, "The handle has a bit of a (red) leather wrap to it." Fuckit, black hockey tape. Whatta waste.

[@DaRkLoRdZoRc]

Future Markiplier is my favorite prop maker.

[@sebastianvega6613]

Overall I'm still very impressed with the build. I love Final Fantasy VII and especially the Fusion Sword so I was really excited to see this done.

[@XionProductions]

That looks amazing!

[@narutodssunny]

Now make the engine blade from Final Fantasy VX.

[@TURNAROUNDJIMME]

Man At Arms should've done this...

[@EugeniadeLana]

/watch?v=xogheZdAO18 Is not the same... And the old blacksmith seems not like how huge the sword is... haha

[@TheArg17]

+Dmunnyjuan Xd do you realize how expensive/impossible this would be to make in actual metal?

[@EugeniadeLana]

TheArg17 Do you realize they did?

[@RubiksGaming18749]

They did, like sometime last year

[@THEbbqsause]

André Dutra No that's the BUSTER sword this is the FUSION sword

[@jesserivera5991]

I've seen many tutorials but this looks like the best

[@OminusReaper]

i need to make this at some point after christmas it looks amazing

[@FEBRIZIOtv]

Sorry the foam mats are NOT 10 bucks for four. It's like 25

[@FayinKay]

Probably the store close to him sells them at that price

[@NateNook]

FEBRIZIOtv i get 4 for 8$...

[@FEBRIZIOtv]

Nate Setiawan where at?

[@NateNook]

FEBRIZIOtv harbor freights! use a 20% off coupon from there website. Youre welcome :)

[@Freemananana]

FEBRIZIOtv Harbor Freight my man. You're welome.

[@UmOtakuRetro]

Muito bom ,mais algum Br?

[@augusthomartins1214]

eu

[@guilhermearoeira8900]

É NOIS!

[@WellingtonSantos-xg7wk]

biiiiirl

[@UmOtakuRetro]

kkkk aí sim

[@LeoArcie]

tetas

[@FeralBoyKnives]

You make it look so easy!

[@joshualarsen7011]

That's awesome, man!!!

[@ZAHAANDO]

I feel like they should've handed this project over to man at Arms

[@titheproven954]

They already did the Buster Sword

[@preludedude4765]

not the fusion sword tho

[@ersyadiaz]

with that size and thickness? nah man... in the prev season they can even barely lift the buster sword

[@myfinalheaven9590]

But they didn't, so.......

[@31FilmTalk]

Sahil Shabbir Man at Arms already made the buster sword