Love your Idea of not taking of the hard line at the cylinder
@tylhunt9 жыл бұрын
Thanks for the video. Good tip on keeping the line hooked up to the cmc when removing/installing it. Have to change mine soon, so that should save me some time/knuckles.
@tomr62453 жыл бұрын
8 years later and thankful as fuck bro , thank you !!
@santiagoarroyo34272 жыл бұрын
Thanks doing mines this weekend
@TheGerbsteve7 жыл бұрын
Sick vid dude... I'm replacing my 2007 si fg2 cmc with a k-tuned cmc. I'm hoping it will fix my shifting and notchy 2nd & 3rd gear
@kevinjbreslin71117 жыл бұрын
Gerb Productions did it fix it pal
@DjDuncman8 жыл бұрын
Thanks for the video man. Good reference, even for the 2006 SI.
@AJGR33NWR9 жыл бұрын
Good video made me laugh that's always a plus
@JosePedro-be1gc2 жыл бұрын
Mine when out on 360k original part no joke this video help me alot thanks, I'm trying Power Torque master and slave cylinder from O'Reilly see how long it last.
@UYC.2 жыл бұрын
thanks man you help me allot 👍
@ショーン-x7f9 жыл бұрын
Doing mine right now for an 02 rsx the head of one of the outside bolts broke off and spilled everything I heard it's easier to do it from the wheel
@killerpitdbo10 жыл бұрын
Hi thanks for your video. I have just test drove an 03 si with 150,000 miles. I am looking to buy it but the clutch pedal seems like it has very short travel. Are they like that or is this the problem. Also the brakes seem like you have to push in pretty far to stop. I had many five speeds that all had a longer travel but not sure how the ep3 is.
@jordanbryant526010 жыл бұрын
HAHAH "I don't need to tell you how to bleed the clutch" I LOL'd. Good video though boss
@st3v3nb9155 жыл бұрын
Good video . My ep3 has the clutch lose I have to put my foot all the way in in order for it to engage. You have any idea what it can be ???
@mattyice1005 жыл бұрын
Start at the smallest stuff first, check your fluid then from there the slave/master/clutch
@st3v3nb9155 жыл бұрын
matt got it fixed I was missing fluid plus had to get the clutch pedal adjust it’s running 🏃 again thanks for the reply!!
@st3v3nb9155 жыл бұрын
matt looks like I’m going to have to change it it’s leaking from the clutch master slave cylinder I have to be pumping my clutch like 20 times before it gets stiffed
@explorenationproductions44616 жыл бұрын
Hi mate any idea on what the hardline as u said what is the part name for that please??
@jessejackson89208 жыл бұрын
considering replacing mine at home with family. very easy to follow, thanks man
@limewoof6 жыл бұрын
I know your pain my guy. 6’10” and I have an Ep3, about to take on the master. Already put in a slave and clutch
@palapunk134 жыл бұрын
thanks for thi video!! this helped me a lot!!!.... can you tell me how to bleed the clutch?? thank you!! 👍👍👍👍😪
@Camm.Lynam75 жыл бұрын
I'm having problems with my 05 type r with high rpm struggling to change gear, and even a few times on idle its really hard to get it into any gear as if the clutch isn't fully disengaged could this be my problem? Thanks
@mattyice1005 жыл бұрын
Sounds like it could be, try bleeding it and see if it's any better. It's either the master or the clutch itself.
@lifenz15 жыл бұрын
does the omni power cause a hard pedal ! or this happened to me only!
@mattyice1005 жыл бұрын
It made it pretty stiff, but not unmanageable
@eligarza842010 ай бұрын
What’s the red button for
@musskeeterbump5 жыл бұрын
Is this a reason why my clutch pedal squeeks
@johannevaillancourt68609 жыл бұрын
i juste got the master replace like 5 months ago and iam still having problems with it maybe i got a bad one need to do it again but this time iamma do it my self
@musskeeterbump5 жыл бұрын
Mine is starting to fail , It lasted 287,466 miles .