Clutch Upgrade in MkV Supra - Project Supra Ep3

[@WILDSTYLEVOLATILE]

The fact nothing needs to be machined or lined up spot on is awesome, anyone with a brain and tools can have a crack at this at home

[@pheonixfps9248]

Anyone with a brain wouldn't buy CI products.

[@chrisginoc]

​@@pheonixfps9248CI?

[@pheonixfps9248]

@@chrisginoc Clutch Industries.

[@chrisginoc]

@@pheonixfps9248 got it. Basically you’re saying this Uni clutch by them is trash?

[@jamessbarker]

For anyone wondering about these clutches, I’ve just put one in my 370GT making 745nm of torque and it’s amazing, the pedal feel is exactly as they describe. There is a very tiny bit of twin plate rattle you hear every so often. And it’s holding the torque great so far

[@browie316]

Looks like a nice bit of gear, great to support Aussie engineering. You were all over that Lotus Exige, was waiting for the pass!

[@Twin_Turblown]

As an N54 owner, I was very intrigued by this clutch a while back. At some point they had no longer offered the kit for my vehicle, but recently I have found out they are now offering it once again. They only offer the track version at the moment so I was skeptical at first, especially about the noise and the pedal feel. I shot them an email and they got back to me right away answering all my questions in full detail, so I am already happy about the support, and now seeing your video of the Track Kit ON a "BMW" has given me the full confidence I need to go ahead and pull the trigger. I do have a small request, if I just haven't come across it yet, but what changes would we possibly see with their flywheel kit or even an aftermarket Single Mass. I am only curious due to understanding that at SOME point the Dual mass may have to be changed because it does have springs of their own to dampen some sound and vibration, but if the noise or vibration is minimal enough, would it be worth it to buy a lightweight SMF that will never need to be changed? Thank you for this video! Can't wait to binge everything you've posted.

[@BMW1M]

Given the issues you discovered with the sport Uniclutch, I’m curious if we’ll see any updates on how the track spec Uniclutch went with a few more KM on it?

[@rsleeper32]

What where the issues that came up?

[@BMW1M]

@@rsleeper32 watch their previous video… the Uniclutch Sport’s damping system was showing premature wear at just 1500km

[@Worldshero]

Dying for more project no secret!!!! ☠️☠️☠️☠️

[@MotiveVideo]

So are we but zero funds and even less spare time. Reality is it has to sit and wait till have both available.

[@Worldshero]

@@MotiveVideo if I lived in Australia instead of japan I would offer free labor 🤣 that’s how much no secret content means to me! But no serious best channel on the internet or tv anything anywhere period! Massive fan

[@MotiveVideo]

@@Worldshero Cheers. People don't see the corporate work we do to pay for the cars. KZbin doesnt even cover the rent for our office each month. It's sponsors, merch sales, events and corporate work that keep us going. If we had two million subscribers we could go full time YT

[@BMW1M]

Can't wait to get one of these into my 600whp BMW 1M 👌

[@peteradams2105]

Of course it fits both because the mk5 isnt a supra its a bmw 😄

[@BMW1M]

Update: won’t be happening. Uniclutch tech dept feel that the level of torque my car makes is too marginal even for the track version clutch.

[@easty6615]

Keep the upgrades coming!! What steering wheel have you fitted? And how painful was the install? Cheers

[@5lcalais1]

1265 for the track for my fg xr6t ,that's really a good price for a 2000nm rated clutch ,normally you'd pay over 2k+ for a clutch that serious. The 2 lower spec ones won't even cut it behind any barra pushing 500whp+ , I'm at 480whp and 775nms atw currently ,that gotta be close to 950/1000nms at the flywheel easy so my only option is the track and being I'll be mainly hitting the strip, that's gonna be savage for any clutch to deal with. My only concern is that input shaft/spline piece sheering or eating itself, like spinning on itself. Yes the flywheel takes the brunt as does the clutch surface but that doesn't necessarily mean that spline piece won't still break. I'm going to ask around to see how other barra owners fare with the uniclutch before proceeding, I mean my stock clutch is holding fine atm and it looked in good condition when it was out back in November during the engine rebuild ,figure I might get another yr or 2 out of it yet so got time lol.

[@TheMultiDouche]

No twin plate rattle! That’s the best part, how else are people supposed to know you’re better than them.

[@BMW1M]

🤣

[@nomienoman9232]

What a cool product

[@_Hani_26]

Where do I get one ?!

[@Mrpancake72]

I'm a little disappointed that it's only a 8 inch clutch. I was hoping it was going to be be bit more beefy for the torque

[@tomtom22at]

Interested whether the Supra has a clutch delay valve like most other BMW's?

[@MotiveVideo]

Sure does

[@ryanmattson1735]

How much trq can the sport support compared to the race?

[@kieran_builds]

Any additional sounds/ noises from the Track uniclutch over the Sport?

[@MotiveVideo]

Couldn't hear anything

[@kieran_builds]

@@MotiveVideo because of the new titanium exhaust? 🤔🤣

[@TheOystei]

If the clutch disk is 240mm diameter that is the "large" clutch size bmw have been using for decades including just about every ///M car, and manual diesels.

[@captainbarge]

What's up with granny shifts? Is gearbox that not good? Saving it for later? I've seen you shift normally in drag videos.

[@MotiveVideo]

It’s circuit, no need to try and chirp every gear and un settle the far. Also factory ECU is slow to recover on throttle. So its the car more than me doing it and thats just synchro box life:

[@MotiveVideo]

Alos. Car has a "clutch delay valve"

[@williamp6271]

Does anyone know the name of the instrumental around 7 minutes into the video? TIA

[@yewtubez]

are these gearbox's as sloppy as the M3s?

[@SupraSav]

Never driven the M3 but according to reviews the Supra manual gearbox feels better. There's a couple channels like EverydayDriver and Hagerty(Jason Cammisa) that touch on that and compare M2 and Supra.

[@chrisginoc]

I have the same exact MKV Supra in this video and no it is not sloppy. The best manual I have ever owned and I grew up only driving manuals. Toyota added their own weight to the shifter that is unlike the G80 M3 or G87 M2. Not saying those cars are terrible, but the shifter feels way better and gears are smoother in and out of the MKV than other BMWs you mentioned.

[@carllourenznaidoo2470]

Can you drift with a uni-clutch? With clutch kicks and abuse as the flywheel dowels and bolts will now be the weak points instead of the disc coming in contact with the oem flywheel using that as a weak point???? I reached out to race performance in South Africa a uni clutch dealer but have not got any response????

[@MotiveVideo]

A Corolla with 800hp LS V8 was drifting at LZ World Tour with a Uni Clutch.

[@anangelshero0410]

Okay, now make an adapter for the Gen2 Mini Cooper.

[@Bdavk]

Bring back the mohawk

[@Roccorocco892]

13:00 sorry but only the Nissan it’s still can called jdm . The supra it’s bmw with costume

[@MotiveVideo]

Toyota badge on it. Buy it from Toyota dealership

[@Monstero5o]

T56 or TR6060 swap soon lol

[@joshberry8262]

Quicker than any Mighty Car Mods videos around that track 😉🤣

[@MotiveVideo]

We build different style of cars. They're not really chasing lap times like we are.

[@joshberry8262]

@@MotiveVideo wait till they come at you lads in a VW UP! You wont know what hit ya lol 😉🤣

[@pheonixfps9248]

Imagine putting a twin plate organic clutch, in a car and it can't handle that much more than stock power.... I'll keep my twin plate, sprung centre Xtreme organic clutch. Can't call the MkV Supra a JDM sports car...

[@carboydorifutoparty3976]

The stock trans can handle power. There's people making over 500whp+ all on stock trans,but it's just that not many really throw power at the manual mk5s cause they're slower.

[@pheonixfps9248]

@@carboydorifutoparty3976 nothing was said about the trans....

[@BMW1M]

I have been running 600whp (up to 640whp full send) on the exact same transmission for years. Of course mine's an N54, but the B58 is capable of similar power on an unopened motor too.

[@pheonixfps9248]

@@BMW1M nothing i said, was to do with the transmission. Read what i wrote properly people.

[@JustinBone]

The clutch is listed to handle 650 ft.-lb.

[@AdmissionGaming]

Isn't uniclutch made by clutch industries? Wouldn't touch one, their clutch failed in my r33 and ruined the bell housing, snapped the input shaft. Clutch industries doesn't have the best name in the industry.

[@pheonixfps9248]

Yep, garbage shit. Even Mantic clutch is made by them.

[@Roccorocco892]

I didn’t knew that uniclutch its clutch industries I heard some “not good “ stories too , lots of people recommend extreme what do you think?

[@jamessbarker]

Correct it is made by them, I’m currently running a uni clutch in my g37 making 745nm to the wheels and have not had a single issue, infact I can’t tell a difference between the old and new clutch

[@pheonixfps9248]

I've pulled countless CI clutches out of customers cars, and binned them. Garbage!

[@pheonixfps9248]

@@Roccorocco892 100% on Xtreme.

[@nullfield6514]

if only it had a Japanese engine

[@MotiveVideo]

Why? B58 has gone faster unopened than 2JZ Supras are into the 7s with basic engine mods And it is an epic engine.

[@slappi2997]

The supras manual transmission is a Toyota gearbox, not bmw. They were built specifically for the supra.

[@BMW1M]

They are actually ZF boxes - neither BMW or Toyota make them.

[@slappi2997]

@@BMW1M wrong.