CMMG, Aero, 9mm Build Pt2 - best 9mm PCC build ever?

  Рет қаралды 16,509

Thin Line Defense Co

Thin Line Defense Co

Күн бұрын

Пікірлер: 74
@albertptran
@albertptran 29 күн бұрын
PCC, BABY!
@nonyabiz5326
@nonyabiz5326 3 жыл бұрын
How has this been running now that you've had it for about a year? Any issues? I watched both part 1 & 2 and have a mil spec upper and lower build planned for when it gets here.
@twisstedjack5181
@twisstedjack5181 3 жыл бұрын
I also built around the CMMG bolt and barrel 8'' stuffed in a Gibbz Side Charger Upper. I also use the CMMG RIPSTOCK system. the lower is a ZR- Tactical with a Velocity trigger. I use a Holosun 510 Green Dot for my sights.
@steher
@steher 2 жыл бұрын
The hand guard is listed as 7.3" so your measurement is correct. Thanks for showing that, it helped a lot.
@TK-zw3dw
@TK-zw3dw 4 жыл бұрын
I always thought you had to use an upper such as Aero’s XL upper or .458 that has the slightly larger milled out ejection port? It seems to be functioning just fine with your M4E1 upper though. Sick gun man!
@dyzastrus5450
@dyzastrus5450 4 жыл бұрын
I think the ejection port just has to be larger than a typical dedicated 9mm upper. A std 5.56 upper seems to be just fine.
@ChristopherSwanson
@ChristopherSwanson 3 жыл бұрын
I have a similar build going but with the Aero EPC lower/upper. The measurement are extremely helpful since I have the 5" barrel and KVP XL Slim comp. I want the same S-One handguard but they are out of stock and waiting to order. Everything else is I have or is one the way. Great video, thank you.
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
Glad it was helpful. And we're big fans of the s-one. It is getting annoying that everything is still out of stock.
@ChristopherSwanson
@ChristopherSwanson 3 жыл бұрын
@@ThinLineDefenseCo extremely but Aero is working overtime to get more made. I live close enough to drive over to them. Too bad I can't go pick one up. 😂
@johnpeterson5484
@johnpeterson5484 2 жыл бұрын
Hey, you're using a CMMG bcg and barrel in an aero EPC-9 upper? any issues? i would like to use a M4E1 lower with the EPC-9 upper and CMMG guts but have no idea if they will all play nice together.
@SanSabaSongbird
@SanSabaSongbird 3 жыл бұрын
Been waiting since October 19th for this BCG Barrel combo.
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
Same....we ordered a second set for a customer build and we're still waiting. Ridiculous -Walsh
@ijsaenz
@ijsaenz 3 жыл бұрын
Any update on reliability? If I was building a pcc this would be it.
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
Works perfectly... We even made 4-5 more of the same one since then. It's fantastic
@dbriggs1689
@dbriggs1689 3 жыл бұрын
What buffer and spring are you running? Did you use any weights on the bolt?
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
standard ar buffer tube and weight. we tried to use as many standard parts as possible.
@patriot5.56
@patriot5.56 3 жыл бұрын
Awesome little PCC! What buffer weight are you running with this and is it still running flawlessly?
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
Still running great and we actually did 5-6 more of these. Standard buffer tube and weight. Zero failures. It's crazy. -Walsh
@kevinmcmullen..
@kevinmcmullen.. Жыл бұрын
Are you able to use a standard ar15 upper receiver and charging handle? Thanks
@ThinLineDefenseCo
@ThinLineDefenseCo Жыл бұрын
yup! all standard besides the barrel, bcg, and magazines
@ryanp6072
@ryanp6072 Жыл бұрын
What buffer and buffer spring did you use for your 5” barrel; I’ll probably run a 8 but I’m sure it won’t differ too much from what you use.
@ThinLineDefenseCo
@ThinLineDefenseCo Жыл бұрын
just standard ar buffer spring and weight. Nothing magical. we have 3 of these and they're all setup with standard stuff. -Walsh
@michaelgreen3224
@michaelgreen3224 27 күн бұрын
Curious if you had any issues running a milspec upper. They have on the cmmg website uppers with modified ejection port? Curious if that’s necessary. Seems yours ran fine but over time did you notice any issues
@ThinLineDefenseCo
@ThinLineDefenseCo 26 күн бұрын
Totally milspec. These were made before all the updates were made. So i'm sure they made some tweaks but we used a normal one for like 5-10 builds that had no issues.
@blakeparthenay3049
@blakeparthenay3049 Жыл бұрын
How has this run as far as ejection/extraction goes? I have a nearly identical build I'm in the middle of with the same 5.5" CMMG BCG/Barrel and Aero M4E1 receiver set, but I have heard others that built around the CMMG BCG run into issues with the size of the ejection port and failing to extract/eject without enlarging the port. Yours seems to be running flawlessly, so I'm hoping to have the same luck!
@geoffalonzo4713
@geoffalonzo4713 4 жыл бұрын
Can you please post the link of where Jayson bought his 8 inches barrel.
@ThinLineDefenseCo
@ThinLineDefenseCo 4 жыл бұрын
We got them from places that are now out of stock... check ccmg.com I think they had inventory earlier today.
@CharlieLeal13
@CharlieLeal13 2 жыл бұрын
How much was the total bill for this beautiful gun ? I want to bill one.
@reddioblo
@reddioblo 3 жыл бұрын
I love this build and have been looking for something to do as my first build. I think this is it. Thank you very much for all the links. Was wondering if you have an assembly video for this??.. I don't even know if KZbin will allow that 🤔. I specifically wanted the radial delay blow back. definitely out of my budget range though for a Cmmg Banshee at this time. Thank you for sharing your knowledge.
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
We don't have an assembly video :/ KZbin loses their mind over content like that. You could always message us for assistance though
@reddioblo
@reddioblo 3 жыл бұрын
@@ThinLineDefenseCoI figured that much lol. Also thank you very much for responding so fast.
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
@@reddioblo absolutely! It's a great great build though. It's simple to assemble too as the bcg and barrel are that combo that makes the delayed blow back happen.
@reddioblo
@reddioblo 3 жыл бұрын
@@ThinLineDefenseCo very excited. Pricing it all out now.
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
@@reddioblo Joe and Jason run our TLD email, hit them up at Thinlinedefenseco@gmail.com and they may have some super secret info on parts.
@domschulz84
@domschulz84 2 жыл бұрын
Does the bolt lock open on an empty chamber with the standard ar15 upper?
@ThinLineDefenseCo
@ThinLineDefenseCo 2 жыл бұрын
yup
@bigmiken5472
@bigmiken5472 2 жыл бұрын
Hows this thing holding up?? Anything u would have done diff 2 years later?? I want to do this build!
@ThinLineDefenseCo
@ThinLineDefenseCo 2 жыл бұрын
Come join our live chat on Thursday to ask but Joe loved it so much that it's still his favorite gun to talk about. He even convinced all the other team members to build one....I probably should too! -Walsh
@P194-s3i
@P194-s3i 3 жыл бұрын
How do you like that s-one hand guard? Is that little space without the pik-rail on top worth having?
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
The s-one is a team favorite. It not only chops weight but it also gives you a clean c-clamp grip. It does make mounting top pads like a PEC or flashlight touch pad challenging. The R-one would be our recommendation in those cases. -Walsh
@P194-s3i
@P194-s3i 3 жыл бұрын
@@ThinLineDefenseCo awesome 👌 thank you for your response. Those we my thoughts exactly. Much appreciated.
@steher
@steher 2 жыл бұрын
Would the BCG work with a dedicated 9mm lower?
@DannyBashy
@DannyBashy Жыл бұрын
Not a aero precision one obviously the Cmmg lower and upper work with it
@joshuasaha5068
@joshuasaha5068 3 жыл бұрын
Can you use a standard AR15 upper for this?
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
Upper yes, but it needs the cmmg bcg and barrel combo
@FlyLan
@FlyLan 3 жыл бұрын
LRBHO worked with this setup? I have the EPC-9 upper: Aero 11" PCC barrel, Faxon 9mm blowback BCG, EPC-9 Buffer Kit (Aero .308 spring, 7.7oz Epc-9 Buffer), MuzzDev undecided atm. (Speaking of what is the one you have on there? Any update on finding another one? I have the Aero Enhanced MLok 12" x 1.7" id...iso similar look with max od to fill guard id & minimal protrusion from end of guard.) JL Billet Ambi 5.56 Lower: Epc-9 LPK, HiperFire PDI-RG Trying to decide if mag conversions are the best way to go and doing some research on these CMMG 9 ARCs, but am realizing now that I would need that CMMG Radial BCG for those to work so I'm just exploring options.
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
yea, last round bolt hold open and all. It works flawlessly. We've done a ton of these builds lately and everyone loves em.
@DannyBashy
@DannyBashy Жыл бұрын
Apparently it has to be the m4e1 upper and lower the 9mm version(epc-9) won’t work unless you dremel it and do a lot of other stuff to it sadly I might make one of these to save 400$ on not buying a full Cmmg banshee and just buy a Cmmg banshee in 10mm cause idk a cheaper way to make a Cmmg 10mm bcg in a cheaper upper and lower
@DannyBashy
@DannyBashy Жыл бұрын
This build will coast 1000$ before shipping on all the items I priced it im wondering if I should just buy a Cmmg banshee but thinking I want 10mm Idk i don’t think I’ll be happy with any decision at this point lol
@gakis63
@gakis63 4 жыл бұрын
What barrel nut did you use for this build?
@ThinLineDefenseCo
@ThinLineDefenseCo 4 жыл бұрын
The one included with the aero s-one handguard. They include it. As always we at TLD recommend using a certified gun smith for all weapon builds and modifications.
@Boy_sumi
@Boy_sumi 3 жыл бұрын
It looks like it has LRBHO. Correct?
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
Correct, it does! -Walsh
@Boy_sumi
@Boy_sumi 3 жыл бұрын
Thanks for the reply. Like everyone was saying, can’t find CMMG barrel w/ BCG in stock. I have to go with a different option on my build.
@ThinLineDefenseCo
@ThinLineDefenseCo 3 жыл бұрын
@@Boy_sumi I hear you. We've had a set on order for over 6 months. I figured making it out of rocks would be faster at this point.
@kz3048
@kz3048 4 жыл бұрын
Hi. Nice pistol!!! I was wondering what buffer spring and buffer tube you used?
@ThinLineDefenseCo
@ThinLineDefenseCo 4 жыл бұрын
Just standard ar15 buffer tube and spring!
@kz3048
@kz3048 4 жыл бұрын
@@ThinLineDefenseCo thank you.
@ThinLineDefenseCo
@ThinLineDefenseCo 4 жыл бұрын
@@kz3048 absolutely! Let us know how your build turns out. Would love to see it
@kz3048
@kz3048 4 жыл бұрын
@@ThinLineDefenseCo I have all the parts except for the Barrel and the bolt. CMMG told me yesterday that I'm looking at 25-30 week lead time. I question what the people at the manufacturing plant are doing? You cant tell me that there are millions and millions of people wanting this build.
@ThinLineDefenseCo
@ThinLineDefenseCo 4 жыл бұрын
@@kz3048 25 to 30 weeks?? Yea that's baffling.
@5mproductions847
@5mproductions847 Жыл бұрын
Why 5in barrel and 7in handguard?
@ThinLineDefenseCo
@ThinLineDefenseCo Жыл бұрын
because a 17 inch handguard wouldn't work -Walsh
@Bobshell-tw8xy
@Bobshell-tw8xy 2 жыл бұрын
I’ve built 2 of aero’s epc 9mm rifles in the last 6 mo. All aero but 1 was with a 11” Faxon barrel and bolt. Other was ballistic advantage barrel & bolt 11” as well. My question is why would u build all aero and not use the epc upper/lower so all u needed was Glock mags instead of converting 223 mags. Just wondering is all. And nice pistol u have there. Aero makes great stuff.
@ThinLineDefenseCo
@ThinLineDefenseCo 2 жыл бұрын
the reason for this is because the cmmg bolt and barrel uses delayed blow back. It significantly reduces recoil... like a ton. Also we like using pmags because it's familiar and we have hundreds... just change the internals and you have the same ergonomics and muscle memory. -Walsh
@DannyBashy
@DannyBashy Жыл бұрын
I don’t think the Cmmg bcg works with the aero epc-9 lower without dremeling the upper receiver and file the lower metal parts plus removing pieces and other stuff a lot of work and you can’t break stuff easily and it’s just a hastle
@Bobshell-tw8xy
@Bobshell-tw8xy Жыл бұрын
@@DannyBashy no it won’t …I’ve never attempted to do that. I’ve only built aero with aero parts and cmmg with their parts.
@DannyBashy
@DannyBashy Жыл бұрын
@@Bobshell-tw8xy yeah it only works with the 9mm Cmmg bcg and barrel and aero m4el upper preferably in the XL(bigger ejection port) and m4e1 lower with the mag inserts that convert your pmag to 9mm that’s the only setup I know of
@rustyshackleford5509
@rustyshackleford5509 2 жыл бұрын
I'm not sure why anyone would build this gun instead of buying the 9mm banshee. With the banshee you get a lighter gun, it uses Glock magazines, and it's probably cheaper too.
@ThinLineDefenseCo
@ThinLineDefenseCo 2 жыл бұрын
The pre-built banshee is about twice the cost. If you have basic hands on skills you can save yourself serious cash. Most people don't though so...we get it. Also, it's much preferred to adapt pmags into the setup as our belts, carriers, placards, and bags are already set up for pmags. Swapping them all over to glock mags would make the platform far less versatile....and having to now buy glock mags...while sitting on hundreds of pmags. It would just be a dumb maneuver for us. The added weight is negligible....at best.... for the ability to then use the same ar15 platform controls and ergonomics. You don't have to relearn a new platform. I get how you want your setup to be the superior choice, but it's RARELY about one over the other. Just trade offs that you're willing to make for something else. I'd probably buy a banshee if I did it though. Mostly because I'm lazy though.... -Walsh
@alanphillips1344
@alanphillips1344 11 ай бұрын
Around the 2 minute mark you talk about something messing up and you have to rest it. What are you talking about?
@bkg2213
@bkg2213 3 ай бұрын
He said his camera gimble was messing up and had to keep resetting it.
TLD New PCC Build, CMMG, Aero, 9mm Pt1 : best 9mm PCC build ever?
8:22
Thin Line Defense Co
Рет қаралды 10 М.
CMMG Banshee: The Unique Radial Delayed Blowback System
14:55
Forgotten Weapons
Рет қаралды 947 М.
Thank you mommy 😊💝 #shorts
0:24
5-Minute Crafts HOUSE
Рет қаралды 33 МЛН
How to have fun with a child 🤣 Food wrap frame! #shorts
0:21
BadaBOOM!
Рет қаралды 17 МЛН
Russia's Quietest "Sniper"? The VSS Vintorez
17:01
Garand Thumb
Рет қаралды 6 МЛН
The Best 9mm PCC - CMMG BANSHEE MkGs 9mm
3:31
Wesly_Snipes
Рет қаралды 4,6 М.
Quick Tip: Converting a 5.56 AR-15 to 9mm
4:19
Brownells, Inc.
Рет қаралды 330 М.
Nocturn Industries Chimera is here! -  Shot Show 2025
12:56
Thin Line Defense Co
Рет қаралды 37 М.
7 Guns Not Worth The Money
14:18
Honest Outlaw
Рет қаралды 735 М.
CMMG 9mm Home Defense AR pistol Build
13:35
Thin Line Defense Co
Рет қаралды 18 М.
Top 5 Best 22LR Pistols 2024
12:07
TacticalGear
Рет қаралды 257 М.
Pistol vs Rifle, vs SBR: ATF Rules Explained
16:34
Tim Kennedy
Рет қаралды 473 М.