CNC 3D Carving In Carveco Maker In 18 Minutes

[@SethCNC]

💎SpeTool Bits ➤ spetools.com/?ref=SALE ADD coupon code "𝐒𝐀𝐋𝐄" at checkout to get an extra 16% discount on your order!

[@ashleywilliams1946]

thanks

[@conormorrissey7853]

Great video. Really helped my understanding with carveco. Since you used the stock as zero in your settings, when zero-ing the machine should I use Z zero on the wasteboard? X and Y can remain on the stock?

[@michaelzingali3292]

this was easier to follow than the Carveco video Thanks

[@tfsbuilds93]

Great tutorial! Thank you for this!

[@jords1979]

Awesome video. Thanks. This is exactly what I was looking for.

[@jamesmcphillips3961]

Great video, Seth! Saw this just before I attempted a carve into some Purpleheart wood. The times were really excessive and these tips will knock hours off the carve time. As I'm fairly new to CNC carving, can I ask about the Openbuilds software? It's something I have come across before and would like to know what it's like to use in comparison to Candle and UGS?

[@SethCNC]

Hey James! Thank you!! OpenBuilds Control is overall quite similar to UGS, there's a few feature differences between them that might lead one to pick either one over the other. They both have a super small list of included features that are missing from the other one. I did a little introduction video to OpenBuilds . . . kzbin.info/www/bejne/b6Pbn3d_i9eJgq8

[@SiCarter]

Nice tip about dropping the model below Z to remove the wall :-)

[@BoxOfShims]

Great video Seth. Do you have a walkthrough showing how to import two 3D file combining both together as one? Carveco of course. Thanks

[@jessiehogge5244]

Great tutorial, Seth!! I think I’m going to give it a shot on my XCarve with some ball nose bits I picked up a couple months ago. 🤞

[@i7Hcrank]

Going to try this today!

[@lukaspotgieter7363]

Little by little I am picking up on this.

[@kenburnette1121]

Great job. Also a video w/o a 5 minute intro, just useful info?

[@matthewjason5330]

Hey Seth nice video it helped me mostly

[@aam50]

That was a really thorough and useful explanation - thanks. Great video.

[@carnallairv]

Awesome, thanks for sharing!

[@sylviacook2005]

hi when i open a project the windows on the right are not open and i do not know how to open hose window work area?

[@SethCNC]

Hi Sylvia. At the top is a menu called "Windows" in there are some options including one to reset the layout. You might have moved that section somewhere, and it isn't visible. This happens pretty often with dual monitor users and sometimes that menu screen ends up hidden right between the 2 monitors

[@butchrambish7835]

Seth, I have a license for Vcarve. Would this file work with Vcarve? My son was a submariner and I'd love to get a copy of this badge to do something for him if it would work and if you can/would share the file. Thanks for the great info.

[@SethCNC]

Yes, i used a .stl file for this so the file would work with vcarve pro or aspire. I purchased the file from 3d wave and I was going to drop the link to it when I noticed that it can be found on their site in search using "navy submarine" but all of their military files actually don't load. I assume that they caught papers from some lawyers about trademark/copyright and took them down... The same thing happened to a well known patriotic vector website around this same time last year. There are sellers on etsy selling the file still, but I noticed those are simplified versions and lack the details found on the version 3d wave was selling. I have a license to manufacture physical products but I cannot distribute the file and not wanting to risk loosing my license I can't actually send anyone the files that are covered under those licenses. I'm sorry about that. www.etsy.com/listing/879305945

[@butchrambish7835]

@@SethCNC I understand. I’ve been in the computer software business for over 40 years. I definitely understand IP. Thanks for the info.

[@michaelledee6594]

Thanks for your help. My only issue now is I keep losing icons on the right, how do I get them all back? Thanks

[@SethCNC]

The windows menu at the top will allow you to restore the panel. Buttons shouldn't dissappear though, however we've seen many times people using multiple monitors have dragged a panel of buttons to the other screen and not noticed 🤷‍♂️

[@mikeledee8786]

The one case was after I simulated the project I could not find the save icon, I had to use the icon from the top tabs.

[@johndiego3105]

First starting in Carveco, will it “auto set” the feeds,speeds,etc.. like easel???? Just starting out is the reason I ask

[@SethCNC]

Sort of, you will have to select a bit from the library or enter the one you want into the library of its not already there. However the bits in the library are setup for the optimal settings of the bit, without regard to the capabilities or your specific cnc. So if you're running a weaker cnc, like a 3018 than you'll need to edit the provided settings. Easel also reccomends users edit or at least verify the settings they provide as well, often times they are very conservative and can be set more aggressive. 🤷‍♂️

[@johndiego3105]

@@SethCNC ok thanks!

[@rafikshaikh7530]

Thank you sir

[@PeteDominguezify]

So can I still use easel in conjunction with carveco?

[@SethCNC]

Yes, you can use Easel (even free version) to send the gcode file Carveco creates. When saving the toolpath in Carveco set the "machine type" as Easel. Then in Easel you'll import the gcode and Easel will run the carve. You will need to set Zeros to as they were set in Carveco, which could vary from the Easel norms, so just keep that in mind at well.

[@PeteDominguezify]

Do you have a video from start to finish by chance using carveco and easel? Would like to see what process is taken all the way up to hitting carve!

[@SethCNC]

@@PeteDominguezify I don't have a video using easel as the sender at all actually. IMO there's some flaws with the easel sender and I don't love it, so I always use a different sender Program called Openbuilds Control. However I could do one carve using Easel and record it.

[@ronaldhoppus9015]

Good tut. New sub. First bit link is broken (I think)

[@SethCNC]

Ronald, thanks for subscribing, thats awesome! If you've got any topics that youd like me to cover feel free to let me know. Thanks for the heads up on the broken link!

[@ronaldhoppus9015]

Looks like you fixed the link. Just bought both. Would be nice to see the finished carve in the video. :-) thanks

[@richardknezevic7371]

Carveco is artcam same features

[@SethCNC]

Sortof; artcam was developed by a company called Delcam which was purchased by Autodesk and promarily for some of its other software and artcam was allowed to go on without updates for years and eventually Autodesk wanted to close the project down, this is when one of the original Delcam software engineers purchased the source code but autodesk wanted too much $ for the trademark "artcam" name so it was renamed Carveco and the flagship full version is very close to artcam, with some noted improvements since it was purchased back and updates were implemented. The new owner also decided to make lower teirs of the software at a much more affordable price to introduce beginners and less industrial small shops to the software. The version shown in this video is only $15/month carveco maker. So its source code is the same as artcam, with constant updates, bug fixes and other improvements.

[@richardknezevic7371]

@@SethCNC i using delcam artcam 2015

[@davekolp4552]

Sorry you should practice your instructions before making the video. It is too hard to follow.