CNC Machining My First Part

[@hunterl7588]

Y’all wonder why young people “don’t want to work” and don’t get into the trades Yet whenever a young person gets into the trades, they get relentlessly criticized over the dumbest/ smallest things. I get it on my main channel all the time. Despite the 15 year’s experience, and 8 years running my own shop. We all start somewhere. I think she did great.

[@aliallbarzzz4091]

Say it loud

[@christopherknowles]

Imagine thinking 15 years of experience makes you immune to criticism. Maybe in 20 more years you’ll finally realize how little you actually know and how much less you actually knew now. Probably not though.

[@hunterl7588]

@@christopherknowles imagine thinking years alone mean’s experience. You can do the same thing over and over for 100 years and not learn anything new. This is exactly what I’m talking about. You have zero idea what field I’m in, no idea how old I am, all you know is 15 years experience in some field. Stop being so arrogant.

[@christopherknowles]

@@hunterl7588 probably not though.

[@wholesomesunbro1]

@@hunterl7588I’ve dabbled in just about every trade there is man, and trust me, tradesmen are as arrogant as it gets. Keep it up with your shop 🤙

[@robertscott385]

I remember my day in the machine shop. My second day I wasn't all smiles.

[@chuy3840]

Pretty girls get special treatment in trades. Specially if they are good.

[@jebaited4021]

If you love what you do you smile through the good and bad

[@Sparaco487]

Production machining blows

[@Therealziro]

@@Sparaco487how do ? I’m interested in this trade very much. Couldn’t be worse than working in a kitchen

[@Sparaco487]

@Therealziro depends on shop, id rather work in a kitchen most days, very boring repetitive parts being ran so most time just sitting around

[@A_Bit_of_Thought]

There is that something special about the "first time" in learning something new. May the young lady enjoy a long and successful career.

[@velcrodreams178]

I could almost cry too never seen a cute machinist😂

[@bradwinger8199]

Your the reason girls don’t get into trades.

[@miketorreblanca9417]

How cute machinist , and nice attitude 👍🏼 Great job!! Remember that anything is possible depending on how far you want to go!!!

[@prafullarwade]

Congratulations.. wishing a lot of success in your machining career

[@spaghettileggs1570]

I remember the 1st time I hit start😂😂😂

[@joshmcintyre9608]

Me too, I forgot to remove a hold down screw that had to be removed for the op that my boss had programmed for me to run and I whacked it, blew the tool to smithereens, and messed up the spindle alignment on the machine. Could only go up from there. 😂

[@Mr.awesome706]

That's awesome. I just got into the trade myself and I still feel that way some times. It's definitely satisfying every time you get a part done whether you haven't done it before or even if you've done it a bunch. It's always so satisfying knowing you made it. This really shows that and it's awesome

[@kiddykid7552]

Machining my first part , clicked a vitron and got excited 😂😂

[@jasonharris630]

Men built the world women live in for sure.

[@jmeister769]

Nice! I just started machining on February, just pushing the green button at the beginning but now I’m already doing setups, offsets and running and checking everything pretty much by myself. Such a beautiful career ⚙️🔩

[@rodneycarpenter3253]

Great job, cnc machining is a blast.

[@johndonlan5956]

Always remember where the "chicken switch" is girl! (First thing I learned)

[@notyouraveragegoldenpotato]

I didn't work for any huge high dollar cnc shop.. just community College but they tought us some rules day 1..😅

[@Thespecimenhunter]

That’s incredible well done you, what a place to learn as well,

[@Matthew-tv3fz]

Congrats Nice Work 👍

[@nestukiiii]

The girls i know machining: Uruk-hai UmpaLumpa ...

[@Steve-sd7wk]

In aluminum, you can take a full 1/8" off at 100ipm with that kennametal face mill without it even trying. More like "button pusher pushes first cycle start" 😂

[@jesseboise6162]

Maybe watch the full video. She says she designed, and programmed the paths. Not just pushing cycle start. I actually wondered the same thing when I first watched this short.

[@bryantburns3664]

​@@jesseboise6162bitch wasn't even looking at distance to go. She's a button pusher. My toddler could to the same thing

[@968porsche9]

Who programmed the sequence? It looks like she pushed the button.

[@joba2748]

I was about to say the same thing

[@Trygga_Mike]

Everyone has to start somewhere

[@robinlambregts]

"it looks like" Thats were it goes wrong. Assuming...

[@user-Human-777]

You are out of the loop, but everything is done in CAM programs now.

[@aydenhanlon1674]

​@@user-Human-777 yes but the question is who actually did the cam side lol

[@antonio_simuncic]

Good job! Keep up the great energy!

[@CBACProductions]

Now try programming your first part...

[@cheeznipsmagee2357]

For brass 💀

[@theEikern123]

depends on the CAD/CAM like mastercam is super hard for newbs but inventor is easier, and fusion 360 is super easy to learn

[@CBACProductions]

@@theEikern123 yea i meant typing out the g code

[@redford6110]

@@theEikern123love a bit of fusion 🥰

[@redford6110]

@@CBACProductionscan you not just use a similar software as prusaslicer for 3d printers?

[@ScottGunMag69]

Welcome to the club beautiful! I’ve been doing it for 30 years now.

[@FIREGHOST195]

CONGRATULATIONS 🎈🎉🤩👍 AWESOME JOB 🎉🎉🎉🎉🤩🤩👏👏👏 THAT WAS AN AWESOME DAY FOR YOU AND YOUR TEAMMATES….. 😎👍

[@9traktor]

Very fine and sympathic. I like it !

[@TommyPickIes]

Cycle smash! Nah im playing

[@wouterdegroot3803]

I see what you did here.

[@BenJohnsonDotNet]

"Wow, I did not expect it to do that!" - me when a crash happens

[@J1GS4W_13]

As machinist i want my daughter to follow into our family footsteps. She could be 4th Generation Machinist. 😊

[@clifford2427]

Everyone needs to start somewhere. Welcome to the trade

[@jamesj5130]

Young people won't do the trades because to get started, you have to take the shit jobs first, 15-20$/hr to get experience. My first machining job in 2017 was 13$/hr the 2nd one was 21$/hr, and now I'm making 31$/hr and arguably underutilized. The bad thing is now my skills as the years go on will get rusty due to under utilizing my skill set however I try to do what I can to keep myself up to date and practice writing programs/using cam software.

[@scallywag1716]

That's basically with any trade, career, etc. Even if they go on the social media route you don't instantly get famous. It all takes work and pain up front.

[@jamesj5130]

@scallywag1716 No, these kids expect $ 100k a year outcof the gate and professors brainwashed them into thinking they're owed that salary

[@scallywag1716]

@@jamesj5130 not arguing about their expectations. I’m stating the realities.

[@Thevoiceofsomething]

Too many kids expect huge salaries, for no work. They also expect the work they would have to do, to be different/easier than what it is. That being said, there is a lot of gatekeeping in the workforce, too. My current job was difficult to get into, it required specialized schooling, a few years of industrial experience, and several leadership projects at work. I had to play chicken and egg to get in, you need several years experience of industrial experience for the job, but you can't get an industrial job without several years experience. It isn't that nobody wants people in the position, but rather HR policies in the majority of the companies I have run across, are doing like the memes have become. They want an 18-22 Y.O. with 15+years experience.

[@chauvinemmons]

You should try working in a machine shop as the owner's son you're surrounded by the very finest talent there is and you can't throw out the garbage the right way every time they see you coming it's bosses boy this bosses boy that it's like a multi-year hazing but with each and every success you earned the respect of the Masters you don't demand it the bosses boys stuff never goes away but the respect they give you is a powerful thing. Just don't expect it from their mouths directly to you they don't want your head to go and explode or anything.

[@bradwinger8199]

She can’t imagine being to the bosses son, you know because it’s a she, you should try thinking before busting out an asinine story.

[@crawdaddy500]

Maybe Im not ready for marriage but I certainly share your unbridled enthusiasm for everything CNC. Dad should be Super proud.❤ yess I AM Single. 😊

[@andyiglesias9868]

She could almost cry!!😂😂 Wait until she scraps her first part, then she will cry and feel butterflies for like a week 😂😂😂😂😂😂😂😂😂

[@Dżony-bravo-uk]

I would like to work on the CNC milling machine next door.😉

[@cesar.solis808]

what is the beginner’s ig?

[@tylerj9950]

Gotta be her first day out of the hr office with those nails!

[@sweetsendaedreamr]

or she's just starting as she said.. beginner.

[@dobariyanaitikdineshbhai6832]

She's a guest at the shop ?

[@TITANSofCNC]

She is an employee

[@bruhnowayy]

@@TITANSofCNC employee my ass. Yall put that chick to get more views. I bet she doesn't know jack shit about anything.

[@mrdark8660]

​@@TITANSofCNCI worked on this machine in Türkiye but I feel unfair because the salary is very low I used to get $120 a week

[@guitarshredddddder91]

I just want one to make guitar bodies with.

[@trietdohcmut]

The thumbnail, right?

[@bryantburns3664]

Fax

[@markdavis304]

Nice work👏

[@bolivarvas3442]

Hollywood

[@ekiskaliburnirvana9047]

We saw the part that we have to.

[@TKYKZ]

That’s Keith’s daughter. I bet she knew how to machine, not those crazy stuffs though. 🎉

[@Noscrap909]

The hard part about machine shop is dealing with people’s egos. Boss wants you to do it his way, the programmer wants to do it his way, the floor supervisor wants you to do his way, the set up man wants you to do it his way, then you get to the operator and they want to do it their own way. All this adds up to a miserable ass way to make a living. Good luck lady.

[@Rob-vg6lw]

If you aint crashing you aint trying.

[@NiklasAndersson7]

Nice work. Just worried about the safety issues and long hair. When I was a kid they scared us with horror stories about long hair and machines. And rings and jewelry. Or are machines today considered so safe this is no longer and issue, and I'm just an old dinosaur? :-)

[@wholesomesunbro1]

With CNCs, you’re generally not running the machine without the doors closed, so you’re well away from any rotating bits unlike with a manual machine. However, if you have the spindle turning with the doors open for any reason, you follow the same rules as with a manual. Although it’s generally good practice to just follow the manual machine rules while running any machine

[@sweetsendaedreamr]

They also didn't safely house the machines back in the day.

[@esprogdy6297]

Next step is making a program by hand 😆

[@bryantburns3664]

Y tho

[@theEikern123]

i mostly do my own dialogue machining and my own CAD/CAM its so boring to just let someone else do half the work

[@RockHudrock]

More of her plz

[@AlienLeader-e2p]

AVP 👽 Yeah let's go /..

[@Josephe998]

Long nails are very nice in office environment, but not very practical in a machine shop…

[@snazzs-2775]

We need more females in stem jobs

[@thebabbler8867]

NO. That's the problem with this world. Women belong at home with the kids!

[@chuckycheezburger3313]

Just wait till the first crash. As high as she feels in the video, she'll feel an equal and opposite low.

[@magomedovmaksim5827]

Nice beginner!)

[@HighSceneryJunkie]

the bosses daughter

[@doctorgregg6847]

Kylie Granno. 🤔

[@汪哥-m6z]

我客人很多 cnc，但没见过女操作工

[@chauvinemmons]

You know I never saw a black man in Job shop except for one that I helped train he retired not so long ago from one of the biggest EDM shops in Phoenix much respect sir

[@thelovrosaur5411]

You programmed that s nice ... LOL

[@alroma5869]

Those fingernails are going to last like a week.

[@d.v9539]

I want to join your academy

[@НикК-ч4м]

Nice work

[@Wade-1]

Definitely didn't hire her for KZbin.

[@ISILENTNINJAI]

Why all the hate?😂 bunch of insecure men.

[@thebabbler8867]

Insecure about what exactly?.. All she did was press start. 🤡

[@bryantburns3664]

🤡

[@kayla_white01]

My first day i had accidentally scaled something terribly wrong and broke the machine

[@denrol3213]

Ma il percorso utensile chi l'ho ha fatto? Le frese da usare chi le ha decise? I parametri di taglio..? Mah se ha ha fatto tutto lei oltre che a premere start chiudere porta e aprire morsa .....tanto di cappello ......

[@fabrizioandreasi5995]

Ha dei colleghi veramente preparati , CAM e libreria utensili alla perfezione .. il gioco è fatto! Comunque a trovarne così.....

[@denrol3213]

Ottimo.....immaginavo....ciao

[@user-Human-777]

Well done, beauty!

[@anthonydomanico8274]

No

[@hedeisgone]

저런 여성 현장에 있었으면.... 우리공장에 다 연장자야...

[@offroading2867]

Then 2 weeks later, when you fill so comfortable, i want to see video. With broken tools. Sorry

[@azietxu5779]

Con esas uñas donde vas?😂 Este oficio no consiste en dar al boton.😮

[@charinaalveny8847]

this girl with that monster machines makes me sweat 🔥🥵

[@webercruz]

isso é que é mulher

[@gamepada]

No glove,

[@suhagraval6377]

Hiii

[@F30586]

Yeah, those nails…a real machinist. Lol these dudes are getting super weird.

[@IceWolF963]

just dont brak any nails ok : )

[@JohnnyIrish556]

Ain't this part a part shown on the Titans of CNC website?!? So I guess the program was already existant, you didn't program it or so, huh?

[@Ch3rryBomb769]

None of you were born knowing this stuff, or have you forgotten that you had to learn from the beginning? Get used to women in the trade, we make fewer mistakes typically because we don’t come with all your machismo. Congrats on your first part, I love that it’s personalized! Be proud, you are going to rock machining!!

[@alroma5869]

lmao

[@Cmars-f9z]

Always keep long hair away from machines ⚠️

[@edp-theeverydayprepper5686]

If you didn't expect it to do that, then you didn't read the program or proof it out. Learn to read. 😂

[@sweetsendaedreamr]

The first comments were right .. and here is the comment they talked about.

[@BehaveIntolerant]

Beautiful and skills. Tho men will do everything to help you. I seen it

[@jon-ei8iz]

Question is ....did she program the machine, if not , shes just a button pusher....😏

[@purohd]

😂

[@CristianoFénix-z4b]

The machine does all the work. Just saying

[@matthowell6391]

Yea that’s kind of the point… lol

[@jasonteddy5302]

Some of my horses and cattle and rams need snow and ice an concrete cleat shoes with rubber inserts , like five way and six way insert bridge or screw in teeth... and speaking of, some of my brids need their show talons and beaks, and some of my oysters and clams need live polish and inlay, and my cattle for leather need tattooing .. and their horns and hooves need their art works and winter show hooves done also. Do you ever branch out into that and 5 star culinary arts shell inlays? My wives and daughters think I'm kidding but I assure that I am not, we do fine silks and stuff, and I need those lovelies feeling and looking as pretty as possible... in your side work time? The holidays are comming up and the female employees of mine and my wives have been doing well and the women from the " 3rd world " and such working for me and my wives need their dental also..... deep drop wood , the water and lubricant lines. That ball and socket , endoscopic type mill bores and honeing... light and inscents porting ? We do Big and some fine points. Buy that fine point stuff is mostly aircraft and luxury truck and car and heavy equipments stuff.. fine ' silicate " and silicate like vaccum plate work ? Granite? If you're an all female shop, we for sure could use you.. And yerrr purrrT too, so the girls will like you.. 👍

[@boblove6487]

I’m pretty sure she didn’t program that and I’m pretty sure she hasn’t been on. Very many machines.

[@neriksen]

The signature was a nice touch. Now go and play with a real machining centre. Tornos.

[@matthewjones7935]

You mean she pressed go

[@lugariathemyth1307]

Lol please don't machine with long fake nails, bad idea.

[@jeffreygroen9191]

I remember the start of my career, we didn't film ourselfs like idiots trying to impress people you don't know...

[@TheParallelSound]

"machining my first part" closes door presses one button. "I can almost cry". Lmao go get a real job.

[@MaxLee-fh8pn]

Technically the machine is doing it not you lol

[@Ghostride62f]

Everything she says shows she's a button pusher not a machinist

[@sweetsendaedreamr]

With those attitudes towards beginners.. I understand why more folks don't even start learning them.

[@jay-by1se]

her job is clearly to be a KZbin specialist. You can’t be a machinist with ridiculous nails.

[@sweetsendaedreamr]

Meanwhile there are machinists in humanities now. If y'all won't take her.. she can make more money using cnc in humanities field.

[@mik8352]

You did nothing, the machine did it...

[@diosdios3307]

The woman Will rule the world

[@jjwilliam3365]

You go. 🔥girl

[@BuschLightMatters69]

So she pressed a button

[@bryantburns3664]

This!

[@Tank70Torino]

Truly a metal cnc goddess❤