CNC PLUS OLD SCHOOL

Using the CNC mill to do an old school metal removal technique.
#practitioner_of_the_mechanical_arts
Paypal donation www.paypal.com/cgi-bin/webscr...
Support through Patreon / robrenz

[@ThisOldTony]

are you implying... nevermind. :) enjoyed! more like this please.

[@andersjjensen]

Not everyone can do magical karate chops :P

[@malliz1]

@@andersjjensen not everyone has the right chi

[@ROBRENZ]

Thanks Tony, yes I was implying ;-)

[@ianbertenshaw4350]

Just jump on that time lathe of yours and go into the future to where the part is finished and bring it back - too easy ! My problem would be trying undrill all those holes so i can fix a fatal marking out error which I typically only spot on the last hole 😫

[@xmachine7003]

@@ROBRENZ 😂😂😂😂

[@robertwatsonbath]

Thanks Robin, enjoyed the video. Nice to see you have your 48GX kept safe in a plastic bag!

[@TraditionalToolworks]

You say boring and nothing exciting, but I always learn something from your videos. Very helpful in how you explain how/why you do things, such as using the knife edge square the way you do as an example. Thanks for taking the time to put this all together. All the small tidbits are in there, explaining how you use your blocks, cleaning things, et al, all very helpful.

[@peteshainin6063]

For someone like me who did not go through a machinist apprentice program, this video was worth a lot. The tapping, use of the 1-2-3 block for datum reference, the filing, paper on the surface plate, the fillet meister AND the sheet metal shield around your table put a lot of useful information into a very few minutes. Thanks again for a really useful channel.

[@st3althyone]

“This is for you Tony, no special effects!” Really got me with that!🤣🤣 Awesome work as always Robin, excellent content!

[@literoadie3502]

Watching over your shoulder doing even basic things is very educational. Thanks for all the videos!

[@chrisbertrand4925]

Awesome video. Nice usable chunk left over from the drilling trick. The rest of us would have been excited to throw chips everywhere. Learn something new every video. Thank you.

[@xmachine7003]

Robin you saved all of that center material also. Conservation of materials,genius.

[@fpoastro]

I dont think its possible to not get excited about a ROBRENZ or Oxtools video. You all could do a video of doing your taxes or cleaning your bathroom and it would be a full watch.

[@aetherseraph]

So satisfying when you knocked that core chunk loose...

[@frijoli9579]

This is for you Tony!

[@garys9694]

Really good video Robin. The This Old Tony hit was funny as hell! I don't like holding my hands up to protect me from chips. Been there, done that.

[@jonathannewport8557]

Good to see someone still using an HP48G (or possibly S?). Was super bummed when my 48GX screen broke in 2004...luckily still have a 48G+. Luer lock tips for both syringes and bottles are excellent. I buy a few different blunt tip sizes from ~24 to ~10 gauge for accurately applying adhesives, lubricants, solvents, thermal compounds, etc. Been watching religiously since near the beginning Rob...have built a passable university machine shop on the knowledge gleaned from you, Tom, Ol' Tony, Stefan and Adam. I can't thank you enough.

[@captcarlos]

Thank you rob, nice save on material. And the karate chop, perfect, and real! We are being spoiled.

[@timohuber536]

I am studying engineering science rn but this video just made me wanting to become a machinist a little more :) Thanks for the great video!

[@michaelguzzi1]

Never a dull video from you! Thanks for sharing this technique with us, it may be old school but is still useful and relevant today.

[@bryans5150]

Thank you Robin for another extremely informative video. These tend to be way beyond my skill set but I always walk away with something completely useful for my hobby shop but more importantly, I've been able to impress my supervisors at my new job. The effort you put into producing this content is greatly appreciated.

[@andersjjensen]

This may not fall under the category "Exciting", but I had a good time none the less. Due to my disability I won't ever by able to afford machining equipment myself, but I sure do like to "get to hang with Robin in the shop" :) That you throw a bone for ToT while we are at it is just a nice bonus :D

[@rootvalue]

Your channel has one of the best Like-to-views ratios I’ve seen in a while. Your content is so information rich. Thank you for sharing what you can.

[@ROBRENZ]

I appreciate that!

[@mikebillick6842]

the guy I did my apprenticeship under taught me the drill roughing technique and the first production shop I went into laughed at me when I did it....THIS IS HOW ITS DONE MARSHALL!!!!

[@youpattube1]

I enjoyed this video. The fast forward kept it lively.

[@wheelitzr2]

Mount the v on an angle to the belt and it will use the entire belt as you move it accross, instead of needing an ossilation.

[@ROBRENZ]

You will get a secondary burr on the diagonal

[@wheelitzr2]

@@ROBRENZ I shouldn't have even tried and should have just assumed you had a good reason, because you did! Thank you for the reply, always learning.

[@xmachine7003]

@@wheelitzr2 always try. Always!

[@DJ-yp4kc]

Ive been doing the Drill roughing for years now,,,seems easier on the machine and quicker.....Very Good Channel A+

[@throngcleaver]

I sure am glad that a pro is using the same method of scribing lines with a caliper that I use. Fun video!

[@DudleyToolwright]

Simple, straight forward, but still learn something. Thank you Robin.

[@garys9694]

I say we all should learn something each day, if not, what the hell's the use?

[@hifikampy]

Thank you Rob. I always enjoy your videos.

[@smithparkins4862]

That was a blast! Not just a cool drilling routine, but you get a useable piece of Cast Iron to use later....

[@ls2005019227]

Love videos like this..... where I can actually feel my brain expanding, & getting smarter while watching. Thanks Robin!

[@xmachine7003]

Once a person's mind is stretched by a Great idea,it never returns to its original dimensions.

[@Engineerd3d]

This made my weekend. Thank you for the education.

[@Aleksandar_Sladic]

And I actually find voice over much more comfortable to watch. It comes out very calmy & you can better concentrate on the actual work. Thanks for another great video Rob! Cheers

[@rodgerdodger280]

After all the years of knowing you - your workshop is still on my xmas list - keep up your magical work

[@lunkydog]

Never need to apologize for voice overs. In fact there are many positives, we can hear what's being said without background noise level and you can focus on what what you want to say instead of dividing your attention between the job at hand and providing commentary.

[@billchiasson2019]

Great video, always something to learn watching a master machinist work! Thanks for sharing!.

[@ROBRENZ]

Glad you enjoyed it

[@joeldriver381]

Very nice use of the mallet! TOT will approve!

[@jcs6347]

Thanks Robin, I did learn from this - sanding block, meister chamfer, flexing the square to confirm contact. I got an extra surface plate and an old porter cable belt sander just waiting for attention! Thanks again!

[@elyedwards5181]

I like the way you did that. Plus you have a useable piece left over. Thank you for the video

[@ROBRENZ]

Thanks for watching!

[@takisbakalis]

Slick !! Boy I'm jealous of this guy

[@tom_machinist]

12 minutes of #descriptioninaudio that's a YES !

[@agapiosagapiou]

I haft to admit that this is the most impressive thing I have ever seen in machining!

[@wyldanimal2]

Years ago, in the 80's rough drilling was a common metal removal practice. even the CAM systems back then had an Automatic Rough Drilling routine. You could even use center cutting end mills and do Plunge Roughing. or with Non-Center cutting end mills, Pre-drill for the center of the end mill then do Plunge roughing.

[@SuperAWaC]

@@wyldanimal2 mastercam still has those cycles hidden away. you can still use plunge roughing if you know where to look, though i really wouldn't ever use it anymore

[@jmtx.]

Nice way to not waste metal! Looking forward to seeing a build of a new oscillating chamfer grinder!

[@eugencsl]

Nice video. Love this channel and appreciate a lot your videos for the knowledge 🙏🏼

[@ROBRENZ]

Glad you enjoy it!

[@boukhlikm]

Excellent travail Monsieur Tu mérite un j'aime + abonnement . Un grand salut de Casablanca " Morocco "

[@TinkerLynx]

Relaxing video for a Saturday morning. Just bought my first cnc mill (retrofitting an EMCO F1). Hope to have that going in a month or so.

[@edmundasplund]

this soothes my need for precision and attention to detail

[@OstapHelDesigns]

All your videos are a rocket science for me... 🚀 Well done!

[@mikemarriam]

Drilling that core out also left you with a possibly useful piece left over. Thanks for the video.

[@xmachine7003]

Big chunk of useful. Good eye!👍

[@mr_timothyy]

we use the same method at work to put large holes in thick plates. Punch holes with insert drills, remove lug, mill clean then bore to size. Works a treat

[@stumccabe]

Thanks for another interesting video.It's always interesting to observe the approach of an expert. I personally have an aversion to scribing with digital calipers, but it is so convenient - my solution: I don't use my Mitotoyos for scribing but have a cheap generic set that I don't mind "abusing".

[@joehosie]

Wow Robren! Great video yet again!

[@rgmoore]

Robin, I don't know what I was expecting but its way cooler than you led me to believe. ;). That was very nicely done, as usual. Thank you for sharing!

[@c4fishfood]

With the chamfer sander, why not make a mount that holds the angle iron guide at an angle across the belt width, so you hit the full width as you pass your part through?

[@ROBRENZ]

You will get a secondary burr on the diagonal

[@unknownapprentice625]

Like the voice over actually!! Good way to save material and chip clean up too. Thanks for tip.

[@ROBRENZ]

Glad you liked it

[@horacerumpole6912]

For ripping a lot of material out quickly, you can't beat chain drilling- Nice job!

[@bobvines00]

Robin saved a big chunk of ductile iron for a future project too. Since drills are the fastest way to remove material (via machining), drilling like that ought to be about the fastest way to remove that material.

[@rickrick1867]

Hi Great stufff - for chain drilling in steel I drill out alternate holes with a slightly larger drill - it breaks the web out on each side without the drill wandering into adjacent holes .

[@ROBRENZ]

Great tip!

[@HIBAW]

Robin, I take notes on many of your videos. I just reach for the notebook and scribble key words. Sometimes equipment, sometimes technique, sometimes solvents, support and position nuances bessel points and airy points..... Things to go study. Now I also know what I'm going to do with my untrustworthy metal surface plate, if I ever own a trustworthy surface plate...I just wanted to say thank you for sharing. I got a very late start to machining and have only recently done my first few operations, but understood where I was tolerance wise and what's practical with what I have.

[@millomweb]

Oh dear, it sounds like your 2 surface plates short of a full set.

[@HIBAW]

@@millomweb Yeah, but I'm also the dullest tool in the shop.

[@millomweb]

@@HIBAW That makes for a funny thought: "I've reground my surface plate to a point" !!

[@886014]

Thanks Rob, looks great! I liked the plastic bag on the calculator trick. Consider that idea stolen ;) I'll offer a trade of suggesting modifying your chamfer jig so it's not square to the belt. Unless draw filing we don't normally file along the part axis, so no need to sand precisely along it either. Chances are a slight angle wouldn't even be noticed in any case.

[@ROBRENZ]

You will get a secondary burr on the diagonal

[@886014]

​@@ROBRENZ Very good point Rob. However I don't mean to go crazy on angles, and just a few degrees will spread the wear area over the belt of that length considerably and I've never seen any burr when done like that to be quite honest. A machine like this has been something I've wanted to make up for a long time. I currently just use a belt grinder freehand and instead of yet another tool to take up space, may make up a jig to do this type of operation. My grinder has good facilities to allow tables and jigs to slide on/off BTW, no connection to this company, but this is the 48" belt grinder I use and it's from a Sydney, Australia company. I think you will appreciate some of the simple yet very clever engineering functions he's incorporated www.radiusmaster.com.au/belt-grinders/radius-master-48-series-belt-grinder/ I think they export around the world.

[@MilanDupal]

Great old school performance.

[@than_vg]

highly appreciated, many thanks!!

[@TrPrecisionMachining]

very good video..thanks for your time

[@AmateurRedneckWorkshop]

Enjoyed the video. Thanks for sharing.

[@ROBRENZ]

Thanks for watching

[@classicrestoration]

Poetry in motion👍🏼

[@samueltaylor4989]

I’ll take a video by you however I can get it! Thanks Robin!

[@adhawk5632]

And you got a spare piece of ductile iron. Love it👍👌🇦🇺

[@MrRShoaf]

Reminds me of working as a helper at the mold shop. One of my first tasks was to drill sequential holes to clear out a cavity in the 10" mold base.

[@charlieromeo7663]

Well done. Looks like an HP 48G calculator in the resealable bag. Nice touch. I use that model myself. We have some great single point threading programs on them around here. Thanks

[@christurley391]

Thanks for the video.

[@Trancelebration]

Would love to learn from you Rob. You are a grand-master.

[@kmpnelson]

As always, very cool.

[@ROBRENZ]

Thanks again!

[@kmpnelson]

@@ROBRENZ are we getting g a shop tour someday?

[@Finding_K_Factor]

Nice DPM with the AGE3 control. Just noticed this since I recently purchased a Seiki AGE2 knee mill. Love your content!

[@ROBRENZ]

Awesome! Thank you!

[@ReubenSchoots]

Thanks for the upload Robin. I always learn something from your videos. I enjoyed the voice over. Cheers from Australia Reuben

[@ROBRENZ]

Glad it was helpful!

[@ehamster]

Pop the waste cube in the post to me, then I can turn it into the fixed lathe tool post to replace my compound, it looks just the right size. Great video, still plenty of tips to pick up on a simple project.

[@qualified_monkey8813]

Thanks again, uncle Robin! Good content as usual, you always put some valuable information into your videos and present it the way that even roughing a cast iron block seems to be more interesting than almost everything else I have watched this week. I would wish you having plenty of work to do but then we will have less videos, so I'm hoping you won't be too busy and keep up the crazy pace. BTW you have already made more videos than in 2019 and it's only end of May!

[@ROBRENZ]

You are very welcome

[@outputcoupler7819]

I have nothing to contribute, just commenting to make the algorithm happy.

[@bclare2544]

More interesting viewing from Robin.

[@rootvalue]

When you have time, I would love a video on the chamfer setup.

[@OO-xc7zg]

👍👍 Very cool, thanks

[@danielalexander2172]

Great vid. I also do manual and cnc on my SMX.

[@dauber1828]

Like always sir a great video thanks again for sharing

[@ROBRENZ]

Thanks again!

[@capnthepeafarmer]

Happy Saturday! I love your Chamfer-Meister™ tool, I would love to make one of my own, more info please! :)

[@TomMakeHere]

Drilling that block out was a really good method You should keep the drilled out block and put it on a shelf. It looks cool

[@outsidescrewball]

enjoyed....good lessons

[@glennfelpel9785]

Outstanding! Very nicely done and now you have some metal to do something else with, a little like core drilling. We keep the slugs .... never know when one comes in handy. And sure would like to seed what you did on the chamfer meister. Thank you for the video.

[@rocksolidhugo]

Here's my thumbs up even before I saw the video :D

[@sealpiercing8476]

Could you fix the chamfermeister by putting the part loading groove at a shallow angle to the belt?

[@bcbloc02]

Machining ductile iron is so nice. Could be how I wound up with my heavy iron addiction though. lol

[@ROBRENZ]

I love the smell Brian!

[@xmachine7003]

@@ROBRENZ like a Buck in the Rut!!!

[@reiniertl]

That was COOOL.

[@woodyoubemybag]

Thank you for making this video.. I'm not a machinist but this will be useful. :)

[@freddupont3597]

Great engineers use old school RPN HP calculators :)

[@pulsenpal7882]

+ a soothing, medicinal video---antidote to society mayhem :)

[@ROBRENZ]

Glad you enjoyed it!

[@grafixbyjorj]

Definitely old school - my dad had to cut parts out of flat stock on a Sigma Jones jig borer using a pattern of adjacent drilled holes when he started work in the late forties.

[@shawnhuk]

I really need to learn cnc programming... that cnc trak mill sure does make quiiick work of all that processing.

[@shawnhuk]

I’m also quite sure I’m going to build a cage around the table as well.. I’ve seen it many times in your videos and instagram, always wanted to do the same... gotta be time to pull the trigger. Trying to vacuum up behind the mill is a choooore

[@robc2536]

I use a Trak mill at work. They are pretty easy to program using the conversational language provided in the controller. They can also accept G code from Cam programs.

[@garys9694]

A couple of other really good and easy to program machines are the Hurco and Milltronics machines. Big advantage, they aren't limited to milling machines. I used to sell both machines. Look for used to keep the initial cost down.

[@SolidRockMachineShopInc]

I saw that! Your block tapping technique to eliminate bounce back. Steve

[@ROBRENZ]

Thanks for watching Steve! ATB, Robin

[@K-Effect]

I like the smell of brand new tires

[@chrisj4570g]

I prefer voice over style videos. It can teach without belaboring the point. Thanks for sharing. 👍

[@ROBRENZ]

Awesome, thank you!

[@thomasjake3920]

Like # 900, nice round number.

[@James-fs4rn]

👍 another well though out and planned job done. Is that technique only applicable to cast materials and not wrought? How much taper do u have in the vise jaws? Thanks Robin!

[@Heckweek]

Awesome video! Questions on the belt sander, is it possible to have the v grove mounted at an angle such that as you push the part through the v grove, it is also being pushed across the sander? In other words, the part/sharp edge start at the bottom right of the belt sander platen and end at the top left as oriented in the video?

[@m4tty1984]

Out of interest,how much taper did you machine on the vice body for the fixed jaw? I'm guessing it would differ from vice to vice depending on how much they move under load. I'm thinking of doing the same thing with my kurt,but grind the taper in to the jaw itself1

[@salahzenieh2515]

Where do you get the silicon carbide sanding sheet big enough to cover that plate? That plate seems larger than 9"x11"- a typical size of a sanding paper ... Amazing skills and craftsmanship. You bring the whole machining experience to a different level. Your spindle bearing install and cleanup video is mind blowing and all your videos really ... respect!

[@ROBRENZ]

Thank you and glad you enjoy the content. Look in the description of kzbin.info/www/bejne/ZoHddJybbtWahs0 for a source for the larger paper.

[@youcoulduseit7492]

That looks like a hiedenhain screen dose use those 1vpp scales as servo feedbacks . I like the price of the kent cnc your gonna have everybody looking for one of those trak machines . I like cheap tooling ( you tube smell-O-vision) Its wet dog hair that cast iron. chevy crankshafts v8 SB .720 throws/two on the end 1.1" High tension blade dose it drill thinning helps. drilled a scrapyard R/R track sombody welded on ( This piece of R/R track really means somthing to me) found where the weld heat effected zone I guess a really hard alloy can be formed there most difficult piece of metal i ever cut found the value of having a couple carbide and m42 drills beautiful drill out yourself there must be stress relieved good save