Should you buy a NEW Prusa MK4 in 2023 or rather a Bambu Lab X1/P1P?

[@CNCKitchen]

If you could choose: Would you buy a Prusa MK4, a Bambulab X1 or a P1P and why? Also: check out our CNC Kitchen products at cnckitchen.store/ or at resellers www.cnckitchen.com/reseller and on AMAZON (EU) geni.us/s8rYtQ

[@EvilSewnit]

Prusa because the Bambus are extremely loud

[@BeefIngot]

Bambulab X1C. Why? I already did 😁 But also, a variety of reasons. (Warning; This got longer than expected) 1. Prusa seems to wait just too long to make significant progress. They slept on their laurels and relied on their reputation for support, open source and reliability. 2. Prusa tells half truths sometimes (like that the MK4s now prints fast when it doesn't even offer input shaping yet), and their new attitude on their blog about open source rubs me the wrong way. Its like they are doing with many companies that go open source and trying to soft back pedal on the stance because they see the small profits they could be making if they shut down clone printers, ironically stepping on the very thing that brought them into the mainstream. 3. You just aren't getting a lot of bang for your buck compared to the Bambulab X1C. Sure their support is notably worse, but how often do you really need support? I mean really, I would like that aspect to improve, but its there _enough_ to be serviceable and then you are getting the faster speeds, no effort printing and video feed print monitoring, and enclosed chamber, which would bring the comparable Prusa option to being significantly more expensive than it, and thats without the layer scanning or a decent multi filament system (though we'll have to see when reviews for the new MMU come out). Ok, well what about the P1P? Well in my opinion, thats an even bigger open and shut case, because either you pay less money and get a faster printer that works out of the box, or pay more money for a slower printer that you have to then spend 8 hours building for no apparent reason when you could use that time to build something else, or make your own creation. 4. I've recently been annoyed with the sort of mud slinging from Joseph Prusa himself on various platforms. It feels like he's willing to go to the point of almost bending the truth because he knows that Prusa as a company has been sleeping at the wheel for too long and now he has a new player hot at his heels. To be clear, I'm not saying everything he says is invalid, but _a lot_ of it is, and that's not good. Seeing this sort of attitude was really the first time I've felt negative sentiment towards Prusa as a brand. It feels like the friendly people centric facade started to slip. Combine that with their new stances on open source, and the not quite whole truths in marketing and it feels like they are trying to transition away from all that they used to stand for. I mean, printables is great, and they do great work with Prusa Slicer, but I think public opinion is trending downwards not up. 5. I've come to realize that a lot of the Prusa magic I thought I saw was more or less a cult of personality thing. Looking at the Mk3, its just a standard, and out of date printer. Looking at the MK4, its now what a standard printer should be as well. They aren't really pushing the envelope, but the XL is where they have the chance to change that by being the first out of the box tool changing printer so they still have a chance to stay at the forefront even though they are behind right now. That all being said, while I actually do get why Bambulab is closed source (especially considering how quickly the other companies clearly rushed to copy them), I still think Prusa, at least while they still haven't reverted get a strong bonus for me for staying open source. Practically speaking, if I didn't buy that Bambulab, I might've gotten a Prusa if not built a kit printer like a voron (I do have 2 cheapo printers as well).

[@Id0ntca7e]

I dont own a 3D printer yet, but i plan buying one soon. So i inform myself now a longer time. After this video i will more likely buying a prusa mk4 than the bambu lab. The long term support and open eco system as mentioned in the video are some advantages, but for me are others even more important. I have a 2 room apartment and there is a printer with a lower noise level a must have. The speed of the bambu lab is of course great, only i could not have it printing while im doing home office or chilling in the same room. If im going deeper into this hobby, that printer allows me more easily to modify things. Even the price is relatively high of the mk4, there are many things prusa is doing well and that has to be supported.

[@Maxleberger]

I just ordered the mk4 kit. Was on the fence between x1cc, k1 and mk4+mmu3. Went for the prusa because of the open-source-ness, the basically guaranteed life-long support, the availabilty of spare parts and the upgradebility later on the line.

[@vcjuul9190]

Definitely not anything Bambu. Not exactly Flashforge levels of bad, but a thoroughly proprietary design that's made virtually unrepairable in some vulnerable areas is a pretty nasty design practice. On top of that, some serious QC issues with parts like carbon rods are already popping up.

[@TheRAINMan059]

BambuLabs' releases last year were the best thing that could happen to Prusa - finally, an incentive to move quickly in the market. I've purchased *five* Prusas over the years and I will always love them, but they really fell asleep at the wheel with their dominance after ~2019. I'm glad that Bambulabs forced them to actually release something again.

[@scottr4086]

If this was true, they would have released this last year. I don't think they care that much about any perceived pressure.

[@maxwell_edison]

@@scottr4086 well, they'll care soon enough then. I think a lot of people would prefer the bambuLabs printer over the mk4.

[@TMS5100]

It's sad that this had to happen. It shows how complacent that not only prusa, but the whole industry has become. Bambu finally woke them from their cryogenic sleep chambers.

[@lukesmith9059]

Agreed. I built a Voron 2.4 and still love my Prusa Mk3 simply because it basically always works at least with PLA, PETG, TPU, etc. But Prusa definitely needed a kick in the rear to get them to focus. I will probably end up buying the cheaper upgrade kit for my Prusa as I like having a print around I'm not constantly tinkering with, and thus out of commission half the time (the voron). Edit: Also Prusa support really is a value add to the printer when considering the price. When I assembled my mk3 it was the first printer I built, and I asked support some fairly dumb questions to be honest, and they were super informative and quick to respond, no way you would get the same level of support with Creality or some of the other cheaper brands.

[@TMS5100]

@@lukesmith9059 the problem is support is massively expensive and a company should not have to depend so heavily on it as the primary distinguishing factor vs the competition's hardware. prusa is in deep trouble unless they make sweping changes. also they have products like the MMU2 where no amount of support will help fix its fundamentally broken design.

[@BeefIngot]

Its mentioned at 12:26 that it can't be a full review, but in my opinion, it should be. They decided to sell the printer like this, so it is what it is. A secondary review down the road is fair enough as well, but I don't think they should really get any leniency here for misleading customers about the features their product would have. This wasn't a beta product. They didn't ship it out for review with disclaimers. This is available to purchase, right now, on their website and at a premium price. They decided that this product, as it is, is what they would sell, and then mislead people by implying fairly strongly to anyone who didn't go deep into detail that it had input shaping. What this really seems like is a futurized beta mk3s++

[@swissfreek]

I agree. I'm irked that the advertising is so much "it can do this! (*in the future)". But at the same time I get that they would have been absolutely eviscerated if they *didn't* say something about input shaping. So they were in kind of a tough spot. But the way they mentioned it certainly comes across a little shady. Like you said, this is the finished product they chose to release, so this is what should be reviewed today. The input shaping and whatever other future features that will come are more like a MK4S ("S for speed!" lol). I will say that this does highlight something Prusa has in my opinion always been strong about. The printer you buy today has a long upgrade path and they aren't the types to say "cool that you bought last year's model, but you can throw that in the trash now and buy this year's with new features!" Just wish they had marketed it differently.

[@Ahheck01]

Very well said. Huge Prusa fan, love my Mk3s+, but agree on everything you said.

[@awilliams1701]

Well it's kind of a full review for today, but it's not a final review. I suspect he'll come back for a final one after the updates are released in a couple of months.

[@Keptains]

Preorderded, and i will get it anyways, a Prusa XL. When ordering it i thought "hmmm i put klipper on my Anycubic i3 Mega now im wondering if Prusa has input shaper as well" and then i thought like ofcourse the have to already have it. So yes it really was a bummer to hear "oh, our version of input shaper will be available some time later". Regardles of that, regardless of seeing the Bambu Lab printers, regardless of considering a Ratrig V-Core 3.1 first: i still went with the Prusa XL as it will bring neat out-of-the-box features like multi toolhead and partially heated bed(Good for Small and Good prints aswell as bedwarping) and other things. But most importantly this time i wanted to have a workhorse Printer where i simply press a button and it starts printing without calibrating or anything.

[@swissfreek]

@@awilliams1701 That's the thing with Prusa though, there's never a "final" review. What they put out today is the finished product, not a beta, not pre-production. It stands alone. Prusa will continue to periodically update it for years. That's one of the great things about having a Prusa printer. In a year, you can bolt on new features, instead of having to start from scratch with a whole new product. And that's exactly why it's still a bed-slinger even though the new hotness is CoreXY.

[@TeachingTech]

I think this is very fair coverage. Like you, I paid for my MK3 and it has been a reliable workhorse. I like Bambu machines too but I agree I don't want only them on the market. I won't be buying a MK4 or upgrading my MK3 to this spec, but I do have a 5 tool XL on order that I am happy to pay the Prusa tax on. I will be very disappointed if it releases with missing advertised features though.

[@TMS5100]

* creality and qidi have entered the chat

[@skywardsoul1178]

@@TMS5100 Can't comment on qidi, but I'll never buy another creality product. Bad QC and false advertising. Generally poor support.

[@allertschallenberg1857]

Michael, I understand the monopoly argument in essence, but I do wonder why that's an argument now, when a new competitor enters the arena. Are you saying they're too good then?

[@Tetribution]

@@allertschallenberg1857 Prusa is open source, Bambu isn't - While a "monopoly" isn't really the argument here, It's just how a lot of 3d printing has gone forward. If I had to choose between two giants I'd rather choose the open source one!

[@jakabgipsz4788]

@@Tetribution Open source means that no one has to pay a licence fee for certain modules or solutions. So why does Prusa double the price of its printers? By the way, Bambulab's entry into the market will help competition. I don't think it will put an end to open source printers...in fact, alternative open firmware has just been released for the Bambulab X1!

[@gfetters66]

I have a Prusa MK3 and a Bambu X1C. There are both great printers but the Prusa MK4 is incremental in improvement. The X1C leveled up my printing. Hands down X1C.

[@irql2]

Agreed. Its really not even a comparison in terms of user experience in my opinion. The Bambu is the iphone experience. If you want to really dig in and get your hands dirty, get a prusa or build your own if thats what you're in to. If you want that sleek iphone experience, bambu.

[@joelv4495]

@coryg945 Or an MK4 kit and keep the MK3.

[@InvitusCode]

@@irql2"If you want to really dig in and get your hands dirty, get a prusa" .. no. A Prusa is pretty conveniently product for dummies.. But if you want to "dig in" buy an Ender 3v2, install Klipper und upgrade the shit out auf this thing... after 2 years you are a 3D-Printing Veteran. Max. frustration is 100% quaranteed on your way, but after, you will know every Screw, every Nut, every feature .. I promise ... Getting my first prusa was like vacation / holiday.

[@albertpolak786]

I worked at Prusa at the time, though not on the MK4, and can vouch that the hardware has been overdesigned and overengineered something silly, which is a good part of the reason it's quite late. It really is rock solid though. We had dozens of these printing away half a year ago, they've only improved. BUT the criticism is absolutely 100% justified, it really is quite offensive that it's not all up and running on release. That's just not right. We had our fair share of squabbles with the SW/FW team, personally I'd think they could do with hiring a bunch more guys for there, but then again Prague has only a bit over 1M citizens so that might be trickier than it sounds.

[@meikgeik]

I work in game development, and finding Programmers right now is a nightmare. I've had people demand 2-3x the salary of what our current programmers make (all of them are happy with their wages) for even junior positions. I'm not sure what's going on over there, but if it's anything like the programmer market where I live, that could be a factor. Also, I don't mean to sound callous about wages, but I'm talking about wages that would make a doctor or lawyer jealous... We're a small studio with a well defined budget. It's not fair for some people to be saving for a house for a couple of years while others show up to work in a lambo.

[@4Ivarr]

Agreed. Trying to hire sw engineers in Brno is also tough. It's a very competitive market.

[@retromodernart4426]

LOL shìII, it's a day lat a thousand dollars or so too expensive POS, keep lyìñg to yourself...

[@retromodernart4426]

@@meikgeik Your current programmers are phools, they should be working for a crust of bread and a bowl of water so you can be more profitable, how dare the peons want to earn lots of money too...

[@gadjetsvideo]

It's the same in the Automotive industry, getting good engineers is very difficult at the moment

[@75echo]

FINALLY, a honest review from a person who is NOT a SHILL. Thank you Stefan for being honest. A nice machine no doubt....but like you i expected a bit more, still a bed slinger, a touchscreen that does not work, no imput shaping, still slow...and the price. If prusa can solve these things before bambu come out with yet another market shaker, then i may replace my mk3 with another Prusa.

[@johnfaustus1]

This is important, as a good 90% of KZbinrs are i) Prusa fanboys and ii) on Prusa's direct or indirect payroll (obtuse sponsorships usually). There is no justification for _yet another_ 15-yearold bedsligner iteration, especially one at 1000USD base price.

[@Marco-yk8kp]

stefan is probably one of the biggest shills on the site lol. he has banned people on his comments who suggest phaetus hotends and pretends like they dont exist, because slice pays him to do so

[@AlbertoMartinez765]

@@johnfaustus1 YES!

[@jenspetersen5865]

Unless you need to print a lot of TPU/TPE then why in the world would you go with a Prusa MK4 that is 450€ more than the cheap Bambulab that has it beat in every aspect?

[@McBearyOne]

@@jenspetersen5865 Noise, The Bambu is really loud and not everyone has the space. My printer is in my office, next to our bedroom. And it is produced in the EU and not in China. Maybe that’s dumb, from a personal point of view, but I try to buy „local“ products over Chinese. And they have great support. If I have problems, even years from now, I know I could fix the printer. But mostly it’s the noise and where they build those machines. That being said, the X1C is a great printer, for most people it is better and I still think about getting one too, once I figured out where to put it.

[@ReeferReas]

Sold my Prusa MKS3+ and went for the X1 Carbon. Bambu is light years ahead. I really do hope Prusa and others step up their game!

[@fabien85100]

Yes but do you think you could keep your bambu lab working after 2 or 3 years (comparing with a prusa)?

[@ReeferReas]

@@fabien85100 I definitely think that bambu will provide support and spare parts for a long time. Their wiki etc is great. But of course, only time will tell.

[@grumpyoldgamerUK]

​​@@fabien85100 My experience with a Prusa mini was poor and got sent back. I had a P1P delivered a couple of days ago and it really is a game changer imho This is the printer I have been wanting for years especially after having several Crealitys. Something that just works while offering great quality and speed. I don't really care for the whole open / closed argument I don't want the printer as a hobby to fiddle with and when you watch the Bambu in action you can see where all the development went and how much tech is working together The early testing of the K1 also shows the benefit of closed sourcing

[@jocelyndrolet4610]

Same for me and i have no regret.😀😀😀😀😀

[@johnlisle123]

@@grumpyoldgamerUK Do you mind me asking, was there a reason you went with the P1P rather than the X1C? Was it just a price decision?I'm just tryinig to decide which one to order.

[@parallaxe1]

I have been struggling a lot in my decision between MK4 and X1C. In the end I have ordered the MK4 for its company's open source approach, superior support, proven track record of long-lasting, reliable product strategies, and commitment to its user base. I'm sure I'll miss the shiny feature-richness and stunning speed/quality offering of X1C, but everybody has to decide based on one's own priorities. Thanks, Stefan, for this video to support my decision process ❤

[@1fareast14]

I'd frame the open source issue differently. The bambu won't have spare parts at some point, parts are glued in, and the community will dry up as soon as the next thing happens. Open source ensures machine longevity, upgrade kits aside, the community will come up with a lot of support for the mk4 which will keep it updated and in good working order longer than the x1

[@wfpnknw32]

but that's not the case in almost any other industry. Hardware innovations almost always start with hobbyist development then as soon as professional proprietary companies get involved then the quality jumps up massively because they can invest in research knowing they'll be able to make their money back. 3d printing has had alot of innovations but it's still in it's infancy. It takes hours to print something, materials are far inferior to injection made parts mechanically even with superior geometry. They're also unreliable despite being They're also unreliable (how many times have you had to clean out the cylinders of your car despite it being infinitely more complex and having more varied usage. We still use a 2 axis printing system with one print head because we're not able to scan the part in real time. Saying diy is working fine why get professional is like saying what's wrong with the apple 2 we can just make new peripherals. The fundamental tech is still basic we cant rely on the 7 year prusa product cycle to fix this.

[@meikgeik]

This is the most often overlooked point for the Bambulabs printers. I don't understand why no one is talking about this.

[@JoeWayne84]

The market has never came to The rescue when a manufacturer stops producing replacement parts!!! 🙄 Pretending you won’t be able to keep a bamboo labs printer working due to Bamboo labs not open sourcing there machine is a bullshit . Just admit the surpassed Prusa in there first attempt and a year later what did Prusa give us … A upgraded mk3 . Prusa needs to get off of there ass and work with Voron community on a actual modern printer a plus $1,000 bed slinger in 2023 is embarrassing.

[@ernestryles]

@@meikgeik because it’s a moot point.

[@nils1953]

​@@meikgeik because it's just not true. With the amount of units shipped the only problem I see are with the Software slicer Integration that could become outdated in a few years. Other than that, you'll always find replacement parts, even of not OEM, simply because of the amount of units sold. 3rd party sellers can always produce replacement parts if even if the product is not open source... Especially because there are no patents on the product. You can already get quite a few third party products for the X1. I am sure if BambuLab were to stop selling replacements or increase the price significantly, other vendors will pop up.

[@petergamache5368]

Since you mentioned Printables - the one frustrating thing is their search interface. Clicking a faux search box only to have the cursor jump to a real one is frustrating for users with accessibility needs. They could have just gone with a simple search field that worked the way every other website does. :(

[@ScarfmonsterWR]

I have no accessibility needs and that fake search box confuses me every time too, I can only imagine how bad it is for someone who has them.

[@swissfreek]

Yeah, I don't get what's up with that weird design language. That weird box gets me every time.

[@MayaPosch]

There's also way to use that website in any other browser than Chrome or Firefox, leaving Pale Moon users and others rather annoyed. I'm not sure what the developers behind the site were thinking, to be honest...

[@gz625]

Lol who cares about invalids 😂

[@St0RM33]

i agree

[@EmmeryCheung]

One thing to point out about Bambu vs Prusa. At least in Canada it's a lot easier to get your hands on a Bambu than a Prusa. Spare parts is also easier to get. Ordering official Prusa parts is pretty expensive here because of shiping/duty. I'm sure it'll vary where you live but good to know if you live here.

[@svachalek]

Same in the USA. I had some issues with the mk3 and it’s really frustrating to pay $2 for a part and $50 for shipping.

[@cyber649]

This is so true. One of the reasons I cancelled my mk4 and got a x1c instead. I still have my mk3s+ and still a great machine.

[@ivyr336]

The benefit of open source then. You don't need official prusa parts

[@EmmeryCheung]

@@youeatthemtheydie You're right you don't have to, I"m just saying shipping cost is something to keep in mind when you make a decision. For example if you want to order an upgrade kit you'd have to order direct and don't forget that awsome prusament.

[@Swarm509]

I have two MK3 printers when I was printing a ton but I doubt I would buy another if I was in the market for a new replacement. I still recommend a Prusa to people who are not very mechanical/tech savy as I've had great experiences with tech support and company, and the printers pretty much just work out of the box, but otherwise I would be looking at a Bambu or different company.

[@DohnJoe73]

I had quiet a few printers and got a Bambu X1C in January. The Prusas are nice, but I‘m not spending over 1k for a printer made of printed parts. The Bambu runs since 4 monthes now and just delivers great results. Dont want to miss the AMS which allows multi material or/and color prints. For example for perfect supports with a different material as contact layer.

[@MikeKow80]

The whole reason I went with Prusa was for the support and community. Got tired of other brands where you can't get parts, no support, no options. Sure also helps it's a damn good printer. I'll either sell my mk3s to buy a 4, or I'll upgrade.

[@jakubmastalir3557]

prusa doesnt have any community and support is only acceptable

[@mercerwing1458]

@@jakubmastalir3557 What?

[@TheJustinist]

​@@mercerwing1458 yeah what they said is just straight not true.

[@BlackOmegaVirus]

Me too

[@BlackOmegaVirus]

@@jakubmastalir3557 😂 wtf

[@justinhenley162]

It’s important to keep in mind that a lot of the parts on the Bambu Lab machines are not user serviceable. The X and Y linear rods are epoxied into place and the idlers are pressed in with one way pins. They also do not sell any of these parts. I saw one example where a user had to send the whole machine back for a bad idler. Basically if you have any problems with the rods, bearings or idlers out of warranty you’re screwed.

[@rsilvers129]

Just pay for service or buy a new P1P for $699.

[@squishybrain]

Excellent point! This is the main reason why I rejected the possibility of purchasing a Bamboo Lab printer.

[@PyroNine9]

That's a huge reason I would consider an MK4 before a Bambu Labs machine. Maintainability matters.

[@BeefIngot]

You are simply wrong about the linear rods

[@LilApe]

@@BeefIngot No, hes not. Bambu lab themselves have stated that the motion system is NON SERVICEABLE. Your only option when the bushings wear out, is to send the printer back to china for repair.

[@henriklagercrantz]

I love my Prusa Mk3s+ it just works. No clogs, no misprints. No headaches. I have a load of creality printers that I feel sometimes is a waste of space. I use them when I need to print something larger. Otherwise it’s the Prusa. It just works.

[@padigree]

The problem with the firmware features reminds me very much of the release of the prusa mini. Originally, the wifi connectivity was one of the main reasons why I bought a mini in pre order. I was allowed to wait about 1.5 years for this feature though, which is why I've already built a voron and a mk3s on klipper in the meantime.

[@AttilaSVK]

Also AFAIK, the Mini was supposed to come with X/Y perpendicularity correction, just like the i3 MK2 and MK3 did. There's still nothing despite the fact that the Mini is the printer which needs it the most, because of its construction.

[@wilurbean]

how'd you put klipper on there

[@justinhenley162]

This was one of the main things that soured me on Prusa. It took them almost 3 years to add WiFi to the Mini, by the time they added it I had mine listed for sale. They also never added the power loss recovery they promised and as far as I know it still doesn’t have the print farm software they promised.

[@UnwrittenGamingftn]

I feel this, all of their new features on mk4 are just klipper features

[@KanielD]

Not only did the Wi-Fi take forever to be released, but it is 🗑️ compared to every other solution.

[@MrNortySpock]

An honest person discloses their biases and tries to compensate for them. This is an excellent, honest review and I think you made an excellent point that buying a 3D printer is like buying a car - you are buying a tool, but you're also buying into the brand image, the ethos, and the ecosystem.

[@ThatVideoGuyTom]

I purchased a Bambu X1C after owning two Makerbot Replicators (first gen 2/2x) and the difference 10 years makes is staggering. My ABS parts almost never warp now on the X1C, and I have a 99.99% success rate for parts. The AMS was a bit tricky but works great for what I need it for. I am concerned about doing repairs and I hope they have a Repair Hub in New York City in case my printer breaks down. I ordered the extra parts bundle but I really want things like fans, or filters, or more belts, or circuit boards - things that often go wonky over time. Still the X1C is a very impressive machine, I might actually buy a second for ABS and TPU printing.

[@F_K3NT_D]

I agree with the open source community and approach and I also really enjoy printing with my 3 Bambu Lab printers. So little to work on and with much printing being done

[@herr_rossi69]

I ordered the Mk4 as a kit. Bambulab is not an alternative for me. When a printer runs 24/7, speed may matter, but not for me. I'm sure Prusa will continue to grow in speed, quality and features. In any case, competition stimulates business.

[@jeffwitz8556]

I find your review very honest, but you forgot to mention than Prusa officially want to leave the OpenSource world as it is written in the Joseph blog post. I think it is worth mentioning as it changes everything in the comparison with BambuLab.

[@CNCKitchen]

Good point. I'll put a link to that article in the description.

[@faeranne]

It doesn't change *everything* but it changes *a lot*. As it stands they still stand well above Bambu in terms of openness, even if it's not the open we need. Truth be told, what we really need is a new heavy-hitter like Prusa to pick up the Voron base and make heccin good printers from that. No matter how you slice it, in terms of community support and openness, Bamboo holds nothing over Prusa. Doesn't mean Prusa is the only option. (hmmm... now that I say this, I'm gonna start looking at what Voron support there is. Pretty sure I saw *someone* making kits available. Perhaps we could see them jump to replace Prusa soon?)

[@JP-xd6fm]

@@faeranne I don't get the fuss with the open source thing. If you get a refrigerator or washing machine isn't open source. I rather have a "plug and play", with the chamber and all the fancy laser tech than the "open source" stuff... I miss a good afordable ready to go machine without the pain of calibration and maintenence that almost all 3d printers have, I want it like a microwave oven, just forgetting about it and using it when I need it without to do anything prior or post printing.

[@lifeteen2]

They don't want to leave OpenSource, they want a better open source hardware license option. Open source software has a handful of different licenses to pick from to serve different needs, open source hardware has much fewer options and the current options don't work very well for Prusa in the current manufacturing climate. It's just too easy for knockoffs to undercut them before they've sold enough printers to pay their engineers for all the work designing and testing them. What they want is a license that blocks direct clones. That's actually hard to do, but it makes sense.

[@jeffwitz8556]

​@@lifeteen2 Sorry, this debate is decade lates, it has been already sorted out with Creative Commons, if you add the NC option it is not OpenSource. So the statement Prusa want to leave the OpenOurce is right. Nobody says it is easy to have an OpenSource HardWare company, it means that you always have to innovate. They are way behind enthousiast that use Voron, they could embrass Voron, community using Klipper and making their board compatible with in order to have input shaping, but they suffer from the NIH syndrom and want control over the whole process. So they are late, may be to late, a shame for them that the conclusion is to leave OpenSource. What will be the interest in 2 to 3 years to support them if they don't have an Open ecosystem ? What will be the difference execpt the fact that it is technically inferior ? I Hope they will improve on CoreXY, but it will change nothing to the 1k€ market, they are losing it.

[@thomasking9524]

After 4000 hours on a MK3+, I will definitely go with a known company that has given so much to this community. I am upgrading my amazing 'fire and forget' and 'reliable print while I sleep' Prusa printer.

[@thomasking9524]

Prusa wont disappear a year from now like so many companies. Their tinkering means I have a 100% reliable printer.

[@Chickennuggetjoes]

@@thomasking9524lol Bambu labs has far from disappeared. At this rate they will outlast prusa

[@bruderdasisteinschwerermangel]

Looking at your last video, where you installed an aftermarket hotend on a bambulab machine and ran into some issues... this is where prusa's open designs really shine. Adding custom parts is super easy on prusa machines. And the fact that they have a V6 compatible adapter and a breakout board on the toolhead is just the cherry on top.

[@dickard8275]

But is there really a need to upgrade it? I understand if you like to customize your printers, but the X1c is fast enough out of the box.

[@amarissimus29]

@@dickard8275 It's not really upgrading per se... there are always little bits here and there that benefit from tinkering. A new fan shroud idea, a stiffer rail brace, just adding text to a part, etc. Speed is way, way down on the list of tweaks, even when, in my case, your livelihood depends on well printed parts. Relying on proprietary hardware is a huge leap of faith, especially on a product with an unknown long-term reliability. A good start is great, to be sure, but a well-earned reputation carries a lot of weight a long way.

[@ashleys3dprintshop]

@@amarissimus29 Well I have a (not so ) unique perspective. I have an mk3s+ and Bl X1CC. I am close to 2500hrs printed on the X1C and forgot how many hours on the mk3.( dont feel like bringing it out and powering it up for hours logged) but I have printed more in the past 9 months on the new printer than YEARS on the bed slinger. The X1C is my workhorse and side hustle. There is a reason why the MK3 has been sidelined and the Mk4 is a slightly better mk3s. Let's just say if my X1C vanished tomorrow I would get another. It has made back my investment and then some and has been by far my most reliable printer.

[@tasmedic]

Hi Nikola. Could you please explain to me how the soft iron egg works in the rotating magnetic field, and how I can make my own tungsten particle accelerator? I'd be most grateful. Also. I'm very sorry that Marconi copied your patent for the tuned circuit. He had no idea what it was, or how it worked, but it did make him a lot of money. We now have materials available to make your "skin effect" turbine a reality. Have you got a kickstarter set up yet? RIP, old timer. One of the few true geniuses to walk this earth. And a friend to pigeons and a cat, to boot!

[@nehemiahcoble]

@@amarissimus29 thing is the company is reliable as well as their replacement parts being very easy to use and get your hands on so longevity of a hotend is horribly important if your printing amazing and fast prints

[@allliver123]

i got a mk3 s+ recently and love it, i totally agree with your views too, a prusa also is designed to be repairable which is something i really appreciate

[@DBjoerklund]

I think Prusa adds a lot to the community and it is worth supporting Prusa. It is great you do give your honest opinion about the machine - though it is very evident you are on Prusa's side. All that being said I am not super impressed by 5 years innovation, especially on the softwareside. I have ordered a mk4 kit, but instead of upgrading my mk3s+ farm I am experimenting with 0.9 motors and Duet boards for better print quality. I would seriously consider Bambulab or maybe even Creality k1 if it wasn't for their closed nature. Come on Bambulab non serviceable rods!

[@MrPanaramuh]

Someone I know had to order a set and they were only $100 and some change for the pair which isn't bad considering. Everything is serviceable...just matters how much you care to try.

[@jocelyndrolet4610]

I had a Prusa MK3 S+ for a couple of years and now I have the Bambu Lab x1-c with AMS. In my humble opinion, you can't compare a MK4 with a Bambu lab because the Bambu lab is 3-4 times faster and a lot easier to use. It is fair to compare 3 Prusa MK4 with one Bambu Lab x1-c without an AMS, that is because the MK4 does not support automatic filament changes. I am extremely happy that I switched from The MK3 to The BL X1-C with AMS.

[@bomber9848]

Great video! First like you I love my Prusa! I purchased my MK3 in 2020. I love it, have had virtually no issues and I love the fact that Prusa support is always there when I do have a question or problem. When I heard about the MK4 I thought it would be fast like the Bambo. My Atari cartridge holder takes 22 hours to print and I would like to cut the time down. So I started looking at the Bambu. But, the more I learned about the Bambo the more I was afraid of my investment. I read a lot of horror stories about the hot beds being warped and getting replacement or exchanges very difficult due to Bambo being located in Shenzen, China. So rather than take a gamble on the Bambo, I will stick with Prusa. I like being able to contact Prusa any time of any day for any questions or problems. People have reported issues getting answers or fixes from Bambo. So rather than worry if Bambo will be here 6 months from now with proprietary everything, I will buy a MK4. This video helped me! I hope it helps you too!

[@9dvds]

Any regret 9 months on?

[@JanTec3D]

What a great insight! It was an honour to do the internship with you and I learned so much. Looking forward to the following videos ;) !

[@CNCKitchen]

Was great having you here!

[@kenthouston467]

I have the X1C, MK3S+, and have ordered a MK4 kit. My Prusa is my go-to machine when I don't need something right away and I want it to look great. I've had far more failures on the XIC than my MK3 (even though I've had the X1C less than 1/3rd the time), and I imagine that the MK4 will fill the same role as a slightly slower printer with rock-solid reliability. I also like that the Prusa is open source and probably easier to source parts for. I've never had an issue with my MK3, but I've had two warranty issues with my X1C and working on the Bambu printers is a nightmare .... unless you have little baby racoon hands ;) ... Oh - and network connectivity on the MK4 will be a welcome addition.

[@Dorff_Meister]

I've loved my MK3 for the last five or so years - it's been incredibly reliable. The MK4's new features look great. Yeah, I'm tempted by the Bambu machine, but I strongly suspect five years from now Prusa will still be supporting my printer. I'm not as sure Bambu will be.

[@pecky38]

Only time can tell. What if Prusa is just a newly started company? Will you have the same level of trusting?

[@spydergs07]

Being the developers of Bambu are DJI, I don't see Bambu going anywhere. Plus, no other printer touches the Bambu printers and Prusa really dropped the ball with the MK4.

[@lee8org]

@@spydergs07 Knowing DJI from their beginning ...they are Not good at all in supporting their own old technologies.

[@Dorff_Meister]

@@pecky38 I think from my comment it is easy to guess that if Prusa was brand new, I would not trust them, such is why I wonder about Bambu. My MK3 has been nearly problem free for five years. And if you chat with makers, you will find that Prusa is one of the most trusted names - and for pretty good reasons.

[@Dorff_Meister]

@@lee8org this is my fear with Bambu. A 3d printer isn't a one or two year investment.

[@MachinistDom]

I'm really glad there's a good upgrade path for the Mk3 - Mk4. I've wanted to add networking for a long time and didn't because of the limited options, and supply issues. I'll upgrade my 3x Mk3's and probably still buy a Bambu.

[@julieta203]

I bought a X1C recently. I have never printed a part in my life before that. The 1st day I was printing quality parts and 3 weeks later I have produced so many parts with barely any failures. ITs just an incredible printer!

[@XBKLYN]

I've had an MK2S since 2016 and with a number of new parts installed over the years it's still printing at the top of its game. I'm not necessarily a Prusa fanboy but I do like to keep my tools and cars running for a long time and Prusa has a proven track record of supporting legacy machines. For that reason alone I'd probably lean towards another Prusa product which I can repair and upgrade myself.

[@LukeHoersten]

Great review. Really appreciate the Bambu comparison. After owning a Prusa Mk3 for years, it’s the long term support and leading designing/development that I care about. It’s a workhorse. I care more about reliability over a long term than cutting edge features or speed. But you did a great job laying those trade offs out in your video so I can decide! Thanks again!

[@barrettdent405]

You honestly changed my mind a little about the relevance of the MK4. I still think they need to (at least slightly) re-evaluate the price point they can command given the competition. They are bringing a really nice knife to a gun fight. The new hotend is a great start. The new board is a looooong overdue correction. But... 1. No enclosure. 2. Bed slinger. 3. Incomplete firmware missing promised features. So I just don’t get how they think they can still command a premium price-point. I think Josef is going to wake up with the mother of all hangovers when his fanboys (and fangirls) have abandoned him. The MK4 will delay the decline. But I think Prusa Research is in genuine peril if they don’t have an enclosed non-bed slinger replacement (a true competitor to the X1) on the market by next year. Sorry, but the pack of gummy bears and Josef’s ego don’t justify a premium price for an open-air bed slinger in 2023.

[@maxkool007]

THe XL man. They just need a downsized version. No need to get rid of the i3 design. It is great for mass production.

[@CheChe1061]

My thoughts exactly! It's a $500.00 printer at Best.

[@TMS5100]

prusa seems to be following the path of printrbot.

[@Drumaier]

But the gummy bears are really tasty

[@muddasarakram419]

@@CheChe1061 It isn't made in China, it's made within the EU, reason enough for me.

[@samuelkemp4557]

I spent alot of time with my new MK4 trying to figure out why it was slow. The main reason I got it was for the input shaping.

[@orsodaikin]

I don't know if someone else pointed this out about the prices, but bamboo lab prices are without taxes, while prusa prices altrady have them included, and in my country increases the price of 22%

[@BaldurNorddahl]

The p1p WITH taxes is still cheaper than the Prusa Mk4 kit. And of course a lot cheaper then the Mk4 you can actually buy (the non kit version).

[@orsodaikin]

@@BaldurNorddahl Yes, I know but comparisons should be done both with taxes or without taxes

[@nukularpictures]

@@orsodaikin this is why they were done in usd. Us prices are almost always without taxes as the vary from state to state. So don't worry, it was a fair comparison. Both were without VAT

[@orsodaikin]

​@@nukularpictures good to know

[@JohnOCFII]

Very well-reasoned overview of the MK4 and how to place it in the marketplace. I appreciate the points you included about the open source community as well as vendor support.

[@EinfachFredhaftGaming]

Read an article yesterday about them moving away from open source, lol

[@NemoKeine]

Having seen a number of American printer companies shut down due to the explosion of cheap competition, I am very happy with my Prusa's. Having a machine that I can fully break down to repair/rebuild/modify is always a big influence for purchasing. A machine that is easier to maintain that has been tested for thousands of hours is worth that extra up front cost given it is going to be around for years and years of service. Glad to see solid competition forcing companies to continue to innovate and improve instead of resting on their laurels. I have a Mini+ at home and a Mk3S+ at work and plans for a Mk4 for those big prints at home.

[@DerTechNick]

I can tell you that it does not help having the repairability when the overall design is just inferior. I got a MK3S+ for 1.5 years and now buy a X1 Carbon because of the obvious inferior MK3S+ design, features, speed, problems

[@vincentross8691]

Just ordered the MK4 kit as an upgrade / replacement for my MK2s. My MK2s has been a real workhorse and once I get my MK4 I will finally get around to upgrading the MK2s to the 2.5s with the kit I bought awhile back but have been too busy printing to install. While I do find aspects of the Bambu offerings interesting and welcome the competition to help advance the technology, I don't like closed proprietary machines.

[@mistaecco]

I finally encountered some critical issues with my MK2.5s, which coincidentally occurred the day before the mk4 went live. I got mine in the first batch and I can confidently say it's been a joy to use. Straight out the box it printed a flawless 250x210mm layer on the bed, perfect peel and all. The MK2 is also a bit loud but not insanely distrubing... but the mk4 seriously makes it seem EXCESSIVELY loud in comparison. I think you're gonna have a good time :)

[@magicgundam]

I've spent (wasted) too many years on tinkering and troubleshooting printers to get good results from them 50-75% of the time. It was fun at first when becoming familiar with the technology and processes, but now I just want something that works reliably, with speed being a bonus. Bambu Labs finally broke through the complacency that the 3D printing market has been stifled by for years, and I personally have no interest in going backwards to anything less than the reliability and quality my Bambu machines are delivering.

[@hawtdayum]

100% agree

[@mikereliford55]

I think you summed up the issue when you said "The MK4 is the iteration everyone was hoping for." I think the industry needs evolution and not iteration to move forward. There is no doubt that Prusa makes quality and reliable machines but they are essentially resting on their laurels. Companies like Bambu that are taking a clean sheet approach will take us into the future of 3d printing. (Keep in mind that the X1/P1P are not even Bambu's design intent and simply a stop gap to generate income while they continue to reach towards their goals) Machines like the Prusa MK4 still have a place in the world but that place is getting smaller everyday.

[@ImolaS3]

I've had my mk3s since they came out and it is still the most used and most loved of the 4 printers I own (the other 3 are all newer than the mk3s). I am a design engineer and fiddler and have actually designed and built my own version if an I3 from scratch that a friend uses, but for me, the reliability of Prusa (with no need to fiddle) and great support makes all the difference. I fiddle an upgrade am Ender 5 plus and when I need to print something, just use the Prusa. , All of the proprietary nature of the bamboo is a defined deal breaker. I am also unsure if the mk4 is worth my money as I have never been unhappy with the print quality on the mk3s and most of my prints run overnight, so faster is not necessarily better for me

[@totalwayne3089]

I read the comments and it seems that prusa has a loyal, good community. They know their prioreties. Prusa is surely proud of their costumers.

[@256alexdt]

Blind loyaulty is what created wwii lol so they also have to be honest with themselves

[@EntropicTroponin]

Finally a review that is not just comparing $$$ per print speed. Bambulabs is a nice machine, but the open source character and the Prusa long term support are worth paying the 'first world country production rates.' tax. However Bambu provided a much needed kick to Prusa to innovate. Especially the MMU is too finicky to work with and needs improvement.

[@MakerGrigio]

I like the bamboo labs machine, but the cloud requirement is a deal breaker for me. I'll likely be buying the 3.9 upgrade for my mk3 clone.

[@blackstoneriverworkshop7167]

people keep telling me you can offline it

[@arthurcarre1393]

You can use it offline as long as you don't mind using a micro SD to transfer. It's pretty annoying to take in and out, but it does work.

[@Flashbang_Photo]

@@arthurcarre1393 I guess a wireless card would eliminate all of the hassle?

[@blackstoneriverworkshop7167]

@@Flashbang_Photo Would be cool if it did

[@jordananderson1594]

I appreciate that you addressed Prusa's commitment and contributions to the community. The reason a company like Bambu Labs can even exist is because of all of the innovating that Prusa has done, and then released to the world through open-source. Didn't Bambu Labs already have an issue where they were trying to claim open source features as their own and then only backed off when the community (and Prusa) called them out on it? I think that a companies ethic and contributions have to be considered when making a purchase, and that's why it will continue to be Prusa for me as long as they continue to be one of the major innovators and contributors to the space.

[@EinfachFredhaftGaming]

Excuse me but what innovation has prusa rolled out the last few years?

[@Chilternflyer]

@@EinfachFredhaftGaming Which version of PrusaSlicer are you using then?

[@Gromic2k]

yes they have done a lot for the community, but they have also earned a lot from it. And their contribution to the community is now history as their printers are now lagging behind and will probably never catch up. Fanboys of companies should really wash their heads. People should always support innovation, competetive prices and criticize the opposite. no matter the history of the company. Creality is the other good example of companies that have misused their reputation to rip off customers

[@EinfachFredhaftGaming]

@@Chilternflyer the latest one which still misses quite some rudimentary features other slicers give you

[@jordananderson1594]

@@EinfachFredhaftGaming Load-cell sensors (please let me know if another company is doing this), a removable nozzle system that allows any old v6 nozzle to integrate, cycloidal drives in their XL, a large modular bed that can only heat in the printing areas (again XL), hmm. I'm sure there is stuff I'm missing.

[@redavatar]

To me it's clear they rushed it out to market because Bambu was getting too much market share and they wanted to slow them down. Promising features in the future might suck but could be enough to entice Prusa fans from sticking to their brand.

[@_Xantras_]

But they didn't. The MK4 has been in the work since at least 2 years.

[@schrodingerscat1863]

The bought it out now because much of the technology is on the XL and they didn't want competitors in China producing a MK4 like machine before Prusa shipped theirs. Bambu is a nice machine on paper and seems deliver what it promises but we will have to see how reliable it is when it's been in the wild for a year or so.

[@alejoh90]

Should have been a little longer in development, then.

[@Neo1983m]

@@schrodingerscat1863 I can answer that for you right now. I am 100% sure that after a good year, there will be almost no support or any spare parts for the Bambu. Even now you can repair almost nothing on it. No exchange of the bearings, no exchange of the carbon shafts, nothing. Much is even glued in. Holy Sh*: In 1-2 years, most X1C and P1P will be on the dump, because Bambu will have thrown the next printer on the market by then. Throw away and buy new instead of repairing will be the motto.

[@amogusenjoyer]

@@Neo1983m yes you can repair it easily. What are you talking about?

[@Xenthera]

I'll give you my perspective, if you care to read. I've had a mk3s+ (kit) for 2 years. It's been my beast of a printer for the entire time i've had it. My progression has been an anycubic i3 mega+, ender 3, ender 3 v2 and each have been an exciting upgrade from the other. Then I got my mk3s+ and wow. It kind of destroyed my other printers in terms of quality. My other printers didn't lose their usefulness, but they kind of went to the wayside in terms of printing day to day. The automation you gain from a prusa was amazing. I didn't really see myself getting a new printer just because the prusa did everything I needed it to. Then here on youtube I saw the mk4 and the ~20 minute benchy and my mind was blown. HOW does a benchy take ~2 hours and then suddenly take 20 minutes?? I was sold already, went to prusa, signed up for the kit availability notification (which hasn't been sent out even now at the time of writing this :( ). Joel (3dprintingnerd) was doing giveaways of a bunch of printers and accessories, (didn't win any, but such is life lol) and I remember bambu labs p1p and x1 being given away in that livestream. To me, at the the time it looked like another ultimaker clone or something because it was very well put together. Not a bad thing by any means, but with 0 research I figured the x1 specifically was 5,000 (usd)+ because ultimaker seems to think their machines are worth that much lmfao, lmfao. Anyways, after I saw the mk4 I got recommended videos about the p1p and x1/x1c and it seemed everyone was losing their minds over these printers, and I was like, lol why... So I saw a video of the crazy features it had and it was seriously impressive. I entertained the idea of FINALLY looking at the price and that's when I was like what. the. eff. $699 for a completely assembled p1p that prints comically faster than a mk4? (Even with mk4 input shaping which afaik isn't out yet, but also have no reference), what about the x1? the x1c with ams? What, the ams is a MUCH better alternative to the mmu2s? (which I frustratingly have had to tune to death on my mk3s+ AFTER WAITING 3+ MONTHS FOR IT TO ARRIVE >:[ ), anyway I found the x1c with ams is still cheaper than the mk3s+ (and more recently the mk4) non kit and mmu2s/mmu3 + shipping and other fees. I literally ordered the x1c with ams without doing any other research, and by far the most impulse buy i've ever made. Over the entire week after ordering it I did my research and some how became even more impressed and increasingly excited. Anyway, as a HUGE prusa fanboy, the x1c + ams is on a different planet. The speed, convenience of AMS (even for non multicolor prints) etc pushes the machine into a new category. I really don't consider 3D printing a hobby anymore. These machines are affordable and faster than most things on the market. I would LOVE to get a mk4 still, but it's hard to justify it anymore. I think the prusa XL could still provide a bigger print area than any bambu machine, and have less waste than the AMS (for multicolor) but prusa is so slow to the race that I couldn't answer that question for months to come. I got the x1c + AMS in a week after never hearing about it. Anyway, sorry for the long story, but prusa is just not the front runner anymore. I hope this puts a fire under their butts, but the mk4 seems like the response to the bambu lab machines, and like i've heard from other German youtubers, it's too little too late. You know you've made a major advancement in the 3d printing space when all the other companies start making clones of your machines, and it looks like bambu labs is seeing a lot of clones lately. The torch has been passed on.

[@tomtom91610]

Pavé Caesar, ceux qui n'ont pas lu te saluent

[@S.A.S.H.]

I hav e never owned a Prusa, though I have always wanted one. Despite no personal experience, I still agree with your analysis that Prusa has earned a significant place int he market and their long term track record leaves me no doubts that they will continue to be important. The P1P is very tempting, and yet, were I to buy another FDM printer, it would almost certainly be the MK4.

[@mixtermuxter8602]

Bambu P1s is a No-Brainer for me personally. P1s: 600 € complete (was on sale) -faster -less tinkering (plus for me) -core xy -full enclosed Mk4: 889€ Kit -open source (which I don't require)

[@addohm]

I'm so glad you mentioned the noise. I got my mk4 3 days after announced and that was one of my first complaints. It is definitely noisier in most moves than my MK3S+s that sit right next to it. I also HATE how it's just unbiquitiously accepted that tech can be released completely half baked. There is just so many problems in the software, it really triggers me. Also the printer itself is dumb when using hosting servers like octoprint. 😢

[@TMS5100]

half baked tech, like prusa's mmu2?

[@doa_form]

Is it noisier when printing at all different speeds?

[@viewingchannel7929]

@@doa_form yes, I believe

[@ericlotze7724]

Also if you want something fast, get a VORON, HevORT, or RatRig. They can make the *bambu lab* look slow, and are Open Source!

[@BeefIngot]

Actually Vorons and Ratrigs are slower. The Hevort though is a beast

[@FireMedic541]

Bambu’s A1 has now made a move that will hurt Prusa in the wallet. The offerings, capabilities, multi-color option are all options that prusa can’t reach at their price point.

[@handsofrhythm3415]

Prusa reminds me of Nokia . A monopoly that stagnated. Sure I can fire up my old 5110, it still works, still makes calls, very reliable. But it is just a phone (with snake!). The phone I'm holding right now has a colour touch screen, does video in 4K and fills all my banking needs. One is a current, relevant tool, the other is a reminder of an era that has been and gone.

[@calebmeyer2121]

I would choose the MK4, I own a Bambu Lab X1 and its closed-source nature makes troubleshooting some of the issues with its CoreXY system a real bear. The X1 is amazing, until it isn't. The MK4's open source nature makes troubleshooting far easier, and I would have much greater confidence in the Prusa being able to run for years, even if Prusa goes belly up.

[@jasperschoonackers9551]

Indeed. The Bambu Lab looks really nice, but it's closed source nature is turning me off. A 250x250x250 Prusa CoreXY would be the best of both worlds. Maybe I'll get the MK4. Still deciding. My MK3s is a set and forget printer and it just works. If the MK4 does the same with improved quality and speeds, I might sell the MK3 and get the MK4.

[@maxwell_edison]

Closed or open source, i ain't paying the price for the prusa mk4 for something that's main upgrades aren't even all implemented in software yet.

[@nukularpictures]

You know the new Mainboard for the mk4 is also not released and likely never will be fully open source. So I am not sure if it will be that much of an advantage

[@BeefIngot]

This comment is so strange. issues with its core xy system?? you say that like it's some confusing new technology when it has existed for decades... It's like it's not a genuine comment it reads so strangely.

[@mattsonn]

Prusa is one of the few companies I trust when it comes to buying a product based on features coming later like input shaping.

[@MikePorterInMD]

I am new to 3d printing. Yesterday, my i3 MK3S+ jammed somewhere in the hot end. Couldn't get filament loaded or unloaded. But, since I built it from a kit, I was virtually certain I could fix it. It took a little while to realize I was going to have to remove the hot end and pull out the PTFE tube. For reasons I don't know yet the filament was jammed tight in there. Anyhow, machine fixed and printing behind me. No packing off to some place and getting it back 2 weeks later, etc. Oh, the online directions were 99% percent correct, too. And since Prusa supports comments, the answer was right in the comments, I just failed to read them til after I figured out the answer 🙂 So, yes, Prusa.

[@Drehzahlorgel]

Great video. Very enjoyable to watch. Yes, PRUSA and Bambu Labs can co-exist, as competitors. They both have advantages and disadvantages, loyal fans, and we are lucky, to be able to select from which brand we want to buy our printers, filament and so on. What PRUSA has achieved, being a stable player for years and years in the 3D printing industry, that is something that Bambu Labs has to prove.

[@rescuemethod]

This was the review ive been waiting for. I trust and respect your insights more than others as you are practical and focus on results not just specs or fads. I thought id only buy a core xy printer but despite the negatives, its probably better to buy the open source and proven reliable Prusa as opposed to here today gone tomorrow chinese brands without the same level of commitment to rigorous testing and support. Ok so i need to buy an enclosure with filter and poasibly the MMU3 or mosaic palette when that need arises. Still i feel better supporting Prusa who makes the printers in Europe with a majority of non chinese parts, while getting a rock solid printer that should deliver great results for a long time.

[@BeefIngot]

The fact they said it prints 4x faster but it doesn't actually I feel like is something people aren't talking about enough. It feels like misleading marketing even though I know it says it quietly somewhere. It feels like they knew they had to do something to appear to compete so they slapped the touch sensing of the XL and their own copy of marlins new input shaping feature into their now custom build and are acting like they invented the wheel. Also, as a side note, its funny they complain about Bambulab not making PRs when they make new features in Bambustudio when you don't see Prusa improving the marlin available for all printers. Just kinda rubs you the wrong way. Like they made basically a proprietary version of marlin with the veneer of being helpful and open source, and then are angry at another company who arguably is doing similar but in a more open fashion.

[@BaldurNorddahl]

Same thing for Prusa Slicer. Why steal Slic3r and then not contribute changes back to the original project? And yet claim to be the champion of Open Source? They are not!

[@thaostrich]

Recently, I decided to upgrade from my 4 year old Ender 3 clone, as it started to need more TLC and I was just tired of working on it and getting inconsistent print quality. I was stuck between a MK4 and a P1P. I chose the P1P because I wanted speed, accuracy, and a stationary bed. Very pleased with my choice, but I might have thought differently if Prusa made a Core XY, or a large format printer.

[@chuysaucedo7119]

I appreciate you and your videos. We mostly align with how we feel with Prusa. I own 3 Minis and absolutely love them. I love that I don't worry about them. I print and walk away. - Not like the bad experience with the Ender 3 I started with. Fast forward. I want a bigger machine, and fast sounds good. Shortly after almost buying the X1C, Prusa announced the MK4. Decisions!- i almost went for the MK4, BUT, after reading their web page noting "capable" of high speed printing, it pushed me closer to X1C. Add the fact that the X1C already has an enclosure, has a hardened nozzle, and is already proven fast, and it made that choice for me. I'll probably add a MK4 or XL in the future, though. I need to recoup my business expense first.

[@Beateau]

I truly worry about damage to the printbed using the nozzle probing, but I guess many set-ups have done this for a while, so I trust they know what they are doing. They did talk about using the loadcell to determine clogging and skipping.

[@2011dtish21]

That was my concern as well, but then I watched a video of someone getting a perfect first layer on cardboard with the MK4. The trigger force would have to be imperceptible to do that, so there is likely no risk of damage to the buildplate.

[@kilianlindlbauer8277]

Typically the load cell of any nozzle probing system trigger at the force of few grams and tge nozzle is also only pre heated to 140 to 150 degrees, so it shouldn't be much of an issue. The most demanding nozzle probing system is voron tap, the force is tge toolhead weight plus tge force of the retaining magnets. This goes even so far that you have to use the aluminium extrusion and cant use a lightweight aluminium x axis and tge 350mm size is generally a bit sketchy. I mean around 600 or even 700 gramms pushing down during probing can slightly deform the x axis, bed mount (trident) or even the bed itself

[@heavyweather]

Might take some years till they implement anything more useful like clogging detection.

[@paulmilne3038]

Like the video and you bring up the most salient points I feel. Love my x1 love my mk3 but with the huge upgrade price to the mk4 I cannot justify it. In fact since I got the x1 I have used none of my other printers at all. For me a big difference is the c1 is fully enclosed so you can print anything, yes you can buy a Prusa enclosure but that too is very expensive, very expensive and I just cannot afford it. Prusa has done so much but this mk4 feels like a rush job to me, a result of them not innovating at all for years and suddenly panicking when Bambulab appears. Hence it being released without all the upgrades actually being supported.

[@jothain]

I built ages ago IKEA lack closure for my A6 where MK3 has now been sitting for years. I just sometime ago checked Prusa enclosure if I would upgrade, but it's indeed way too high priced for what it is imo.

[@CodyOebel]

Built many MK's -> Now own an X1C , put over 1000 hours already into this printer and Ive not had to fix anything at all on this printer or take it apart. I was worried with the AMS the bambu would run into headaches and be a headache if it breaks. The X1C with multiple filament colors, just RUNS .. truly a PRESS AND PLAY machine. You have to do very little with it but load filament. Everything about the X1C is pure joy when it comes to 3D printing.

[@Theeslickness]

Thank you a good unbiased review. I think the Mk4 is the better printer in the long run due to the support, the open-source design, the firmware upgrades, the nozzle quick swap, and simpler design. While the X1 price is hard to beat, I do wonder how long these pre-built CoreXYs will fair after a few years. I wouldn't be surprised if several of them fail prematurely.

[@youeatthemtheydie]

Stefan raises a great point about Bambu that it is unclear in what working conditions these machines are manufactured. Also, if Bambu really follows the business model of Tesla where they dump money into technology and then sell their machined with almost no profit only to secure their place in the market, I'm afraid to think what it's going to be like years later when the investments run out. I mean, now it is definitely a snatch and if you want a really good machine at ridiculously low price, but I am concerned that this way Bambu is going to push some good brands out of the market just to then become same crapy unreliable brand as many others. That's why I still bought Prusa just recently. That and because I fix 3D printers at work and I don't need one more at home constantly needing my service.

[@Theeslickness]

@@youeatthemtheydie I agree except comparing it to Tesla. Tesla is the most profitable car company. Probably due to no advertising and dealerships. But yes I'm worried Bambu is going to kill much needed business with these machines. Prusa however will likely keep on going thanks to their innovations to FDM. Bambu didn't innovate, they just got community innovation to market faster than anyone.

[@louisvandendriessche534]

I stay with prusa because of the opensource and they are just great

[@meikgeik]

I really hope Prusa hears people like you. Their current talk of shifting away from open source worries me. I'll always pay a premium for something open source with ethical manufacturing labor. :)

[@louisvandendriessche534]

@@meikgeik i know last summer i went to visit there factory and told there that i just love that they are opensourse so i hope that they keep it in mind😂 okay it's much more but thé Quality and support is just so good

[@crowguy506]

Can’t complain about Bambu Service at all.I got excellent service, even as just a Kickstarter backer. Parts come fast, if I need any. There’s simply no way for me Prusa could be better, and especially nothing that justifies to multiply the price even for an unassembled machine compared to a similar slow bedslinger. While print quality matters, it’s fairly easy to achieve if you print slow enough on any Bedslinger of the S1 class. Btw. Prusa is on the proprietary train as well with any new hardware components.

[@Neo1983m]

I can promise you that things will look different in a year's time at the latest. Spare parts: No, service: No, repairability: none

[@Neo1983m]

You also can't compare a printer made of cheap China junk components with one made of high quality materials.

[@real3dprints]

This is the best comparison yet! But I think you might have started out with a review of the MK4, but then pivoted to a comparison, and then left out many comparison topics. But still this is an excellent video and very truthful, and you have the right amount of hope and frustration around the current MK4 late release and the upcoming features. Could you please do another video and discuss these comparison issues? - Noise level comparison - Issues with the Bambu communicating with China - The support experience for each and fixing problems and getting parts - Color printing with the upcoming MK4/MMU3 from what we know now since you mentioned the AMS - Touchscreen customization possibilities on the MK4 - Modding and printer upgrade possibilities - Tie in to Printables and access to models from the MK4 screen, and tie in to Prusaslicer

[@xavierjiang7112]

As someone that help out at a makerspace, that hotend is looking really helpful. New processor as well. Screen is really optional. Printing time would be nice to have, but high speed and 0.2mm usually dont end well, either.

[@woodwaker1]

Lots of good points - pro and con. This is why I really want to see reviews on the XL before I complete my purchase. After purchasing both the Bambu X1 and P1P and building two Rat Rigs, I would really like a printer that is reliable and has a good multi material system

[@ZachLayne]

Did you get the X1 with their multi color system? Do you have reliability issues in general or with the color changing?

[@woodwaker1]

@@ZachLayne I did get it with the AMS. It is probably as reliable as any system on the market. My problem is with so many spools not fitting correctly. I have built a re-winder and am transferring to the correct size spools. If it does not feed correctly you will get a message and can correct the problem and resume. It works, but is slow and seems to waste a lot of filament with each change. I try to keep my changes to a minimum. Here is a video of mine working kzbin.info/www/bejne/jWWVq2NrfLCEm9U&ab_channel=DavidWilson

[@xMarcheslavx]

I just ordered a MK4. The reasons I went for it over the p1p is because of the open nature of the machine and the intense amount of testing that prusa does. I also plan to leverage the reliability of the prusa into the open and reliable voron. The p1p is a neato bit of kit but a little too closed and not quite enough giving back to the community

[@Soggstermainia]

I bought an early Mk2, waited months for it. Made the 2.5 upgrade and it's only now starting to age. Yes I have done bearings, rods, nozzles and such but now the wear and tear on the other parts is making me look for a new machine. I do like the Bambu offerings buuuut.... the Mk4 is fast enough for my needs. The input shaping, full enclosure and seemingly better multi material.... hmm gonna be a tough choice for me to make. I have had other brand bed slingers as a second printer and always come back to my Prusa and sold the other printer. It's been so trusty for me I often don't watch it even start to print, let alone check the first layer is done. That trust in my printer is well earned.

[@charlesorevkin7842]

Wow! You did a thorough job of "comparison without bias" (if such a thing is possible), and I am impressed. I think you touched upon almost all of the comparison points. Thank you for the tremendous effort you must have put into this.

[@peterfelecan3639]

Definitely not a Prusa shill. All your arguments on why buying their products instead of the other suppliers are right to the point. Thank you for your honest reviews and experiments that you share.

[@RickyA]

Nice review, you were very balanced! My position is the MK4 is a solid upgrade from MK3S and is absolutely worth considering for a long-term viable 3D printer. I own a MK2.5S and MK3S, and both run perfectly to this day thanks to numerous Prusa upgrades over the years. They are both getting firmware updates to this day, and the slicer only gets better. The support and community is excellent and is a big reason to STAY with the brand. Yes, they should have had input shaping on day one, and yes, MK4 could have been released sooner. Still, they got 1M hours of testing done before they released it, and they offered three different upgrade paths to MK3S users with the 3.5,3.9,4 upgrade kits. How many other brands care enough to develop, test, and productionize upgrades like that? I’ve got a 3.5 upgrade kit ordered along with an XL, so I am very much looking forward to this summer!

[@user-cq1cp1nj8p]

I've done over 165 days of printing on my Mk3, over 4000 hours, I have only just replaces the steel print bed sheet, apart from that totally maintenance free and it runs like a boss

[@aleksacrnogorac2973]

I have two mk2.5s and two mk3s, one ultimaker 2e, this year I got four x1c's. I still use the prusas and they have served me well over the years. Given the price point of the x1c, I have to say its just a much better overall product. Great and consistent prints with the .8 nozzle. I wont buy another prusa until either the price gets better or they make some significant changes. The x1c is a fantastic printer at this price point and you will not be dissapointed. Only downside is the carbon rods require you to replace the whole carrige but yet to see that break. Also custom nozzles kinda suck but at least they are not crazy expensive.

[@dakota4211]

And then again like all other products we depend on it is made in China. So sad!

[@GANCFLEX]

Absolutely agree with you. We have prusa machines in school and we never had problem with prusa printers so far. We have all of them from MK1 to MK3S+ and some SL1 resin printers and also new trilab delta printer. I like prusa due to it's look, reliablitity and performance.

[@ereroa1031]

Thanks for the speed comparison. After Mk4 and XL came out I havent seen any reviewer compare them by their speed until this one. Actually thought mk4 is fast as p1p until now

[@Chilternflyer]

Thanks for doing this video. I've had my mk3S since they first came out and apart from being the most reliable machine I've ever owned (I've got friends with Ender 3's and they've spent a lot of time fixing and upgrading theirs), Prusa is a truly 'fire and forget' eco system. I'd love to buy a Mk4 but in today's market, it is far too expensive. So unless I can sell my Mk3s for a premium price, I won't be getting a Mk4. Bambu labs is based on DJI's business model so I'm not confident about the long term support for the current X1 series. (I.E. There will be a Bambu "X2" announced in a few years time at which point your X1 will suddenly become worthless because support for it will end and spares will be difficult to source). I'd love to build a Voron but there again; the prices are too high for my budget.

[@adamriese3610]

a very good option here in Europe is buying a used voron or Rat rig etc. yeah a Bambulab X2 is comming but then the same thing happens like the Mk3. Prices for used ones drop very much. Its just normal. But upgrading the Mk3 to the MK4 is also not worth it.... so you end up with the same Problem. But now we got to a point, were most Problems like fist layer, reliability, speeds and so on are done. I dont know how much we can innovate but we will see

[@ChickensAndGardening]

As a complete newbie to 3D printing two years ago, I got a Prusa MK3S+ kit because it seemed like the best plug-and-play appliance available, even though more expensive than an Ender. I have not been disappointed and it’s been a great hobby and learning experience. Now I’m looking to monetize my skills and do some commercial designing and printing. If I need a second printer, I’ll likely get the MK4 because Prusa is so rock solid and reliable.

[@simontanguay3619]

Voron user here. I love tinkering with my machine, but sometimes, you just want a reliable workhorse to do day to day printing while your more "ambitious" machine is going through yet another upgrade or modification. And Prusa printers really are a good fit for this role.

[@jordananderson1594]

Yes! I'm in this same boat, I got into 3d printing with an MK3S but recently built a Voron0. While the Voron is super cool, fast, etc. it is also been a project. It honestly really made me appreciate how good the MK3S is at just getting something good printed. With the Voron, not only do you have to build the thing, but then you have to write firmware for it and gcode, etc. etc. I still don't quite have it to where I want it and it has been printing for hundreds of hours at this point. Changing colors still needs some work, if I need a multiple color print I just fire up the Prusa since it just works.

[@superstrife9880]

Voron 2.4R2 350x350 user here. Absolutely they are reliable workhorses that run day to day, EXCEPT its running at 600mm/s 10k accel. The 2.4 350x350 is actually a similar size to the mk3s/mk4 in terms of total printer size, and since I assembled mine over a year ago, its been down under 1 hour total, but has logged 1400hrs of print time and 14km of filament. After moving from using mk2 and mk3s into a voron, its hard to go back to the small bed, lower print quality, and drastically lower speeds. The XL might have been a good option, but after looking at the "bellows" and cost, I don' think its worth it to spend "pro" printer money on just being able to print in color.

[@ManIkWeet]

I think Prusa will be better when it comes to maintenance. We don't yet know how BambuLabs' carbon rods will hold up over time, and the increased speed also means increased bearing wear. I guess we'll have to see, I think I'd recommend a Prusa still for their support though!

[@djtransnazgrz]

Hypercube I built in 2018 uses carbon rods, and is still going strong, even after abusing it as a pcb mill.

[@Bennett_Lab]

You keep waiting then. My prusa mk3+ hasn't made a single print since I got the X1 Carbon. To spend the same amount for a bed slinger is insanity. It's an inferior design to core Xy. Not even arguable. I don't get it. I mean if you're a person who loves 24 hour support lines. go prusa. If you like absolutely superior machines and not have to call support, get a Bambu Lab.

[@concentricmachining4636]

Carbon is incredibly wear resistant, and bearings are typically rated in the trillions of rotations.

[@OArchivesX]

Bearing wear lol.. if they are quality bearings.. bearings can survive a long ass time on much bigger cnc machines and aerospace products that move at far magnitudes faster than a 3d printer can do lol. Bearings shouldnt be a thought if designed well. No reason a 3d peintwr can't move easily at high speeds when we already have the entire machining world that already exists...

[@investwiselyfolks7656]

You said something very important. The customer service Prusa offers is completely outstanding. I felt “safe” when purchasing both of my mk3’s. I felt content knowing that I can just ask my questions in the chat OR if it becomes beyond my repair capabilities I can always send it for a servicing with fast delivery and updates in real time. Knowing that you will be taken care of truly makes the difference in the world.

[@santiagoperaza967]

I got a MK3 s kit … after installation a sensor was defective , PRusa send me a new spare sensor , I replaced and worked fine for a month and half then another sensor broke and I returned the printer to PRUSA and bought the X1 carbon … what a machine ❤❤… x4 faster , automatic calibration , record - time lapse ( you can see it from your phone ) , error detection notification send to my phone , auto bed leveling ( doing this by yourself is so annoying ) , multicolor printing , etc . what a master piece of machine … only thing left is to see how long it will last . Also my advice if you live in a place where is cold make sure , especially if you buy PRusa to buy the case otherwise your gonna have to warm up the room before start printing 20 degrees I recommend .

[@pretzel_tfg]

Too little, too late. They panicked when the Bambu happened and rushed the announcement/release with "good enough" firmware when creality dropped the K1, which sounds like it's using Klipper and Mainsail (EDIT: Apparently Fluidd if it's the Creality Sonic Pad) and will immediately have aftermarket parts (as it's a creality). Prusa did a TON for 3D printing... But nobody knows what the hell a Xerox is nowadays... Becoming #1 doesn't mean you can slack off, if anything you have to work harder because everyone else can use what you learned to catch up to you faster. Prusa slacked and at this point is putting disk breaks on a horse and buggy. Sure it can stop on a dime but... Why?

[@AlexanderMoon]

Yeah. Reminded me Nokia as well.

[@pretzel_tfg]

@@AlexanderMoon I almost went with Blackberry instead of Xerox... But both being printer companies was just too good. Lots of companies have done the same thing effectively, and now are at most weird corporate supply with zero consumer awareness.

[@AlexanderMoon]

@@pretzel_tfg yes, it's called "bad management", not uncommon.

[@DiegoTerzano]

I decided to support the MK4. Was really on the fences but decided on the Prusa because their open source support. I have been using a closed system since 2016, Zortrax M200 and it is a fantastic printer. However, the inability to support the host of innovations around the open source ecosystem always bothered me. The Bambu certainly appears to be a better value but I'm going with a fully open system with a large ecosystem.

[@itz_pepe]

I don't have a Prusa, just recently (~6 months ago)bought a Neptune 3 as a starter to learn the ropes (and a couple months later they released the Neptune 3 Pro and felt like N3 was left behind instantly ...), I was aiming for a Prusa Mk3 but it was a bit over my budget at that time. However as I see the Mk3 aged nicely and was iteratively improved upon which is a huge plus in my eyes. I would expect the Mk4 to be about the same, over time it will be better ... a lot of the hardware is there, just need to catch up in the software side. I learned a lot in the past months and I definitely go / save more for an Mk4. I was considering a Bambu P1P recently because its has a good price / value, but I would not like to be "vendor locked" that much ...and the Mk4 kit is not far from it its pricing, so its price proposal for me is acceptable factoring in some the longer term reliability / support / improvements.

[@patmcdaniel2016]

Have been using a MK3 for 2 years now, and ordered the MK4 kit. Prusa support is top notch.

[@DoRC]

The only practical reason I can give to pick the prusa over a BL printer is customer support. I have a BL printer and I'm dealing with their customer support right now and it's not great. Bo really needs to make sure they up their support game otherwise they're going to lose out to other brands long-term.

[@ulforcemegamon3094]

Yeah , BL support is not that great , they need to improve in that aspect

[@FedericoAlbano83]

Thanks for the amazing video Stefan. I share each word of your thinking, even though the reality is that the BL is superior at a comparable price. Relevant to the open source i am actually very curious to see how Prusa will approach the new features of mk4 which may be interesting for its competitors, like the handling of the load cell data, or their version of input shaping. Let s see. I think that Bambulab really shook the market and put Prusa on the back foot but this is all beneficial for customers so i'll just sit back and enjoy what the next leaps in this field might be

[@ramaker8]

I cant speak for the Mk3/4, but I do have several Minis and they have been extremely reliable and got me into a hobby I wasnt expecting. At this point I now am working on turning it into a full time business and decided to get a bambu x1 carbon as well. Prusa taught me how to build/repair/tinker with printers, and overall have been extremely reliable for me. However at the end of the day, I am not someone smart enough or has the interest to get deep into the weeds with printers and hardware and firmware, its a tool to make my products for sale. The Bambu feels like such a finished product compared to the Prusa, its ... sexy for lack of a better word. It does everything the MK series does, and seems to do it just as well if not better, the quality is there, the speed is just unreal, most models print 2-2.5x faster then on my Prusas. The AMS actually works and isnt a nightmare like trying to get the MMUs from prusa working properly (will see with the XL of course). At the end of the day, Bambu has really moved the industry forward with their printers in my opinion. Will it last the test of time with support, reliability, and match the great long term reputation Prusa has remains to be seen, but so far I have been nothing but impressed with Bambu. I will continue to use my Prusa's as well for the foreseeable future, reliable workhorses they are indeed, but at this time any new printers I add to the farm will probably go Bambu line.

[@-olli-]

Good and honest review, thank you! I'll wait a bit before ordering one. My first 3D printer was an Ender 3. Of course not comparable to printers mentioned here. But that thing was just a pain and came with more maintaince then printing. My second (and current) printer is a MK3s. And hell yeah, I'll stay with Prusa. Bought the MK3s in 2020 and never ran in a single problem. Slicing, start a print job and pick it up after some hours. I want to design my models and not wasting my time in hours of maintaince. Maybe a Bambu Lab X1 can be a great printer, but I trust chinese devices only as far as I can throw them ;-) I love the Prusa spirit, open design and - especially for my preassembled MK3s - the reliability.

[@PortalFPV]

Bambu is nice, even my buddy, that helped me get into 3d printing, owns one now. I still love my Prusa Mini thou. Certainly had to do some upgrades to it to make it print near perfectly. I think I'll be a Prusa fanboy for a while. There's a lot of heart at Prusa and as long as that stays true, they will keep me as a customer 😊

[@lamMeTV]

I agree with all your PoVs. You explained the tradeoffs well. Go Prusa if you are unsure. If you want better performance go Bamboo but its riskier.

[@markbreidenbaugh350]

I don't think it can compare to the bambu, but I think their real comp is Sovol SV06, you can get one and a sonic pad and run klipper on it for less than half the price. That being said never had a prusa, but I have the SV06 as my 3rd printer and I am very happy and impressed.

[@AndrewEbling]

Launching HW with the promise of improved SW in the future makes me nervous after my experience with the optical filament sensor on the original MK3 - Prusa never really managed to make good on the original promises and eventually reverted to a lower tech solution. I'm rooting for Prusa and want them to succeed but I'm pretty content with my mk3s. As I'd be looking for a big jump in quality and speed of I ever replaced it, I'd almost certainly save for CoreXY machine instead of upgrading the mk3s.