Coatings and Sealants for Metal Jewelry - From Beaducation Live Episode 27

[@reannarudey4]

I just started using the ProtectaClear for my jewelry after I watched this video and I love it so far. I used it on an enamel chain with an alloy charm and no tarnish. I even wore the necklace in the shower for 2 weeks just to fully test it and no tarnish. I found this video very useful to treat my jewelry.

[@beaducation]

Thanks for the feedback :)

[@nyasha7721]

Hey for your alloy charm did you only solvent wipe then apply the protecta clear? Or did u just apply protecta clear directly?

[@Charmsandpearlsbyrea]

​@@nyasha7721Sorry I just saw your message. I hang the charms on a rack and take it outside on a nice day and spray them down. It has protected the charms and gives them a slightly shiny look

[@wendyfarrowartist]

Thanks for this rundown. I have used ProtectaClear in the bottle for many years. I dip once and then hang the piece on a wire in a jar but I babysit it a little for the first hour by dabbing the base of the piece lightly on a paper towel because gravity makes it pool into a drip at the bottom. If you don’t dab it, you will end up with a thicker blob at the low point. I let it dry for 24 hours before applying a second coat. Three coats tends to make the piece look a bit plastic, so I only do two coats. For pieces that don’t fit into the bottle for dip an dunk, I use a toothpick and tap the bigger drips back into the bottle before applying. As I mentioned in a reply to another commenter, I use a mask, protective eyewear and rubber gloves - the fumes are quite strong and should not be inhaled. Hope that helps.

[@awesomeminecrafter8676]

This video was an absolute life saver, I had just finished making a bi-metal ring for my girlfriend and I had no clue what to coat it with to keep it from eating away. If you want to keep a finish on something in the machine shop you just coat it in oil, but I doubt she would want to put an oil soaked ring on her finger 😅

[@beaducation]

Glad I could help!

[@VernaIngrassia]

❤I am wondering about zinc alloy - what would keep it from tarnishing?

[@nikkimickdesigns868]

Hello! I use protect a clear in the dipping form, but i am sorta new to it. I love the product, but it has a strong smell! I let the jewelry hang dry for about 15 minutes or longer before I apply a second coat once i've add the 2nd coat I let the jewelry hang and cure for 5 days as suggested on the can to prevent chipping or any other damage to the coating! Also be careful with some beads that have a special coating on them it can change the look and strip the color of some like AB finishes!

[@beaducation]

Thanks for the tips!

[@catdrugs6656]

What would you suggest to use for beads that have an ab finished.😮

[@Just.P3achz]

It’s been a while. Do you still like it? I’m thinking of the spray version but I also feel the dip will be better

[@askjaiosd]

start: 5:10

[@princezzzz23]

Hi try, Krylon Thick Tiple Clear Glaze it will last longer forever

[@jude1515]

I like Renaissance Wax. I have used it on watercolor paintings. It’s good to know that this product can be used on jewelry also.

[@jamnotjelly1]

hi i don’t normally comment on videos but you guys are so cute and i loved this video. good info!! thank you!

[@beaducation]

Thanks for watching! And thanks for the feedback! Glad you found it useful :)

[@TheBenzoHouse]

do these seals cause issues with people who have allergies ???

[@georginaloginov3960]

Loooove this explanation. I was looking for exactly this. I do have a question, when you spray the Metal how do you do it? Flat on a surface or do you hang the pieces? Thanks

[@melissahull4832]

I gave my children a metal keychain with their dad’s signature engraved in it. Would it be wise to use a sealant to protect and if so what kind?

[@clare6827]

These are useful products, but make sure you protect your skin, eyes, and lungs when using any of them. Apply them outdoors or indoors with good ventilation and wear mask, respirator, or gloves in either place. If you can smell the product through your mask you need something more protective. I don't mean to dampen spirits, but your health shouldn't be a trade-off for making jewelry, and it doesn't have to be if you take precautions.

[@beaducation]

GREAT reminders, thank you!

[@wendyfarrowartist]

Yes. I use ProtectaClear. Great product but the resin and solvent are very strong. I wear gloves, a mask and eye protectors and then hang the piece across a wire in a jar with the lid on loosely so it can dry without any lint or dust getting stuck to it while it dries. I put the jar in the back room with the back door open. Safety first.

[@nicoleli481]

Thank you for sharing. The video is so informative. I wonder that is protectaclear is something like Varnish? Thank you

[@beaducation]

The concept is similar, to protect the surface and create a clear coating, but we didn't try metal varnish.

[@saitdesigns]

I love your idea of including a little polishing pad in with jewellery for customers.. I was just wondering if I advise my customers to give the inside of a bronze ring a quick polish before they wear it will that stop their finger going green?

[@beaducation]

Sorry for the very late reply! I just found a batch of unanswered comments! 😬 No that won't stop the reaction as it is with their skin and the particular metal. It's the metal that causes the reaction not the tarnish.

[@chrisdavid4017]

Hopefully someone here will be able to answer this question. I’m looking for any recommendations on what to use to seal/cure polymer clay jewelry that will be in contact with skin for long periods of time. The earrings I plan to build from polymer clay will be inserted into holes for stretched earlobes and I want to make sure that whatever product I seal the earrings in won’t be toxic or harmful in any way. I’m looking for one that once cured is not sticky and has a nice clear shine to it. I was considering protectaclear, but I notice that it is noted to be used for metals. Any suggestions would be greatly appreciated. Thank you.

[@beaducation]

Sorry we don't work in polymer clay. Did a google search for "polymer clay sealant" and there were several sites where multiple products were tested. Hope you find the specifics you are after.

[@kimceballos94]

I’ve been looking for a video like this! Thank you for sharing ♥️

[@PUR3C0UNTRY]

One more thing-it protects patina well!

[@chanmia0714]

Does any of these seals help when you are allergic to all Metals, even n nickel free metals? I would like to use this on a belt buckle and a medical alert bracelet. Which would work best?

[@beaducation]

A coating on the metal can certainly help with the metal touching skin directly.

[@nikkiatkinson2914]

I've used the Rust-Oleum clear enamel for years just for that purpose. Works well for me!

[@user-lr5cx1ni4r]

It does help. I am the allergy queen and it does help a lot.

[@nla7737]

What about dishwasher-safe Mod Podge for sealing? I just bought a bottle to seal some inexpensive jewelry. Wondering if anyone has tried that.

[@beaducation]

hummm, interesting idea. I haven't tried that

[@kennethsantuyo5115]

Is it ok to use them on my vivienne westwood jewelry?

[@beaducation]

Sorry, I am not familial with that jewelry so I can't really speak to that

[@marcoo.d.798]

Hello, I am new to this art and I wanted to ask you for some recommendations on how to seal my pieces, so that the tin is not in direct contact with the skin (it irritated my skin a little hehe)

[@pustapustka]

So... I'm thinking... if a Renaissance wax was invented to seal furniture, will regular furniture wax work and seal jewelry?

[@beaducation]

Hummm, interesting thought. From what I have learned, there is something special in the Ren Wax that makes it useful for sealing jewelry and I am not sure if it's in all the other furniture sealants.

[@celestesanterre796]

Are these products ok for gemstones and pearls?

[@beaducation]

I would not recommend them over gems and pearls

[@redfuse8369]

Does anyone know how long protectaclear lasts on copper wire that has a gold fimish on top for jewelry making? If for example you wear the jewelry piece often, would it need to be sealed agaim every 3 months maybe?...

[@beaducation]

Unfortunately, there is no clear answer to this. There are so many factors involved. It all depends on if the piece is rubbing against the skin, or worn in the shower, or the chemistry of the wearers skin etc.

[@ceafva]

You mentioned "industrial" sharpies. I was researching comments on Amazon and many major comments said these weren't any different, and/or better than, regular sharpies. Would you do a video on regular vs industrial ones?

[@beaducation]

We have tested both and noticed that the industrial lasted longer (no running off). But there are other products on the market that are way more permanent. Below are a couple of examples. www.beaducation.com/search?qry=jax www.beaducation.com/p/6349-jewelry-making-tools-impressart-stamp-enamel-marker-pen-black

[@user-lr5cx1ni4r]

They're wrong. It does make a huge difference.

[@goldenmoongoddess]

great video ! thanks ladies !

[@davidsteinfeld9123]

I do have some experience with the ren wax it is a bit tedious and I would prefer to spray or dip as I do have many to deal with and some if not all have difficult spaces to reach nookes and crevices makes it hard with the ren wax in this a dip or a spray would make short work of it oh of course clean as normal then coat I have had some stuff turn green with other products still I seek something better and simpler when there is many to do

[@noralosaria7833]

Where i can buy that product..

[@beaducation]

beaducation.com/products/pol009?_pos=1&_sid=65273d0b4&_ss=r We carry one of the products shown. You can also try online resources and or hardware store.

[@ceafva]

Was a little confused on your recommendation for using the nontarnish pieces. You said "zip it"...did you mean you close it in a zip bag and then add it...or leave it open.

[@beaducation]

You can store in a sealed plastic bag and you can also add an anti tarnish tab. www.beaducation.com/p/99-jewelry-making-tools-anti-tarnish-tabs-pack-of-50

[@July09itc]

Which one is the best for copper jewelry??

[@beaducation]

You can use any! But the Protectaclear is a fan favorite

[@krystlepacis2124]

Can i use for gold plated chain brass for protectaclear spray? For tarnishing

[@beaducation]

I am sure you can. I would test it for sure!

[@izabella3510]

Which one lasts the longest?

[@beaducation]

Judging by what we tested a product like the protect-a-clear lasted the longest.

[@hopemazymackennedy9397]

@@beaducation Which sealer is the best to use on jewelry with beads in it of which cannot be covered w/painter's tape?

[@mortithedog8088]

I’m curious if any of these products prevent scratches on soft metal. I find my aluminum pieces scratch up really easily.

[@beaducation]

I don't believe they prevent scratching. They are mainly for preserving the color/brightness of the metal. And to protect against oxidation and the elements.

[@rosiegreener2659]

@@beaducation Hey! Do you know of any coating or other solution to surface scratching (in reference to gold plated or silver plated brass in particular)? I sell signet rings and wish I could find a solution to stop these getting scratched so quickly for my customers when they wear them!! Thanks.

[@jaramcconnell]

Can this stir in brick stitch for delica beads

[@beaducation]

hummm, to be honest, I am not sure

[@cynthiameans]

Very informative. Can all these be used with raw brass?

[@beaducation]

These should work on most metals.

[@shayneyne]

@@beaducation For plated findings too?

[@aly3560]

Does Renaissance Wax work on Brass?

[@esonaStone-l9u]

Where can I get it?

[@beaducation]

a variety of places. I would start with a google search to see if you can find it locally

[@ianaivanova]

Can you use any of this product on a copper jewelry with semiprecious stone or crystals?

[@beaducation]

Not sure about adding this products to beads/stones or crystals but it does work on copper metal.

[@niqsworld9713]

Thank you

[@Lord.Smith.the.first.]

I've got a large nordic gold signet ring that was investment cast any ideas for a metal lacquer or sealants i could purchase in the UK?

[@jilldudney8684]

Stainless steel jewelry doesn't tarnish and it's very affordable!!!!

[@beaducation]

Yes, you are right

[@eljovenlavoe75]

Stainless steel jewelry (silver) doesn't tarnish. However, Stainless steel (gold plated 14k or 18k) does tarnish. So there for, this product's that the lady's reviewed, will help prolong the color gold on the stainless steel jewelry.