Cobb Accessport Dialed Mounts Defroster Vent Dock

[@unkle037]

Had it for about 8 months now. The mount started to warp a bit because of the sun. The magnet fell off about a week after I installed it also. Had to get some sand paper and scuff the surface and re-glue the magnet. And lastly, the top corner of your AP will rub against the windshield every time you put it in or take it out the mount which could cause a little wear on the AP corner. It’s the sleekest mount I’ve owned but there needs to be a revised version to address the problems. Then it will be the best mount for me.

[@sebastiansam8339]

Man I was iffy when i heard all of those bad rumor reviews! But I can honestly tell you I have made quite a bit of purchases through you and never experienced any of the complaints that everyone makes. And I will continue to buy more parts from you!

[@rmitchy1189]

Can having the heat on damage the accessport ?

[@DankyDre420]

Did you figure out if it does?

[@simonyou6440]

This beats 3m taping the dock that comes with the AP because this one holds the connector in place. Easier to plug and unplug especially if you don't want to leave your AP plugged in.

[@SickoGaming1337]

Shitty you guys fired him and still use these videos

[@Menace_sti]

Hahaha i forgot to remove my film and was like damn cobb couldnt put a better glass screen haha

[@somersfamily]

be careful with this. I had to basically re glue and fix this when I got it. the magnet fell apart after 2 days. I had to get gorilla glue and fix it. also on the company's site it shows a different style then what they sent you. ( not subiespeed) the company that makes them.

[@jojonokimyonabouken7615]

There’s no way the freaking bolts actually tighten down. Mine went maybe a quarter or half tight and won’t tighten all the way

[@jkljkl218]

Heads up, make sure your cobb is fine after using the mount, at least once or twice a month. Buddy's stopped working due to the ac and heater.

[@misael1396]

Did he get a refund? I really like this mount placement cause it's clean.

[@jkljkl218]

@@misael1396 refund for the mount? Nope.

[@mrhavoc2415]

Really? I've left mine in my car mounted in the Arizona summer with no issues 115+ degrees

[@jkljkl218]

@@mrhavoc2415 i think it was the constant turning on and off with the ac blowing into the port, condensation maybe?

[@pumpkinspicelatte1731]

That's my concern I just bought this mount and in the summer I blast the shit outta my ac where I get condensation build up coz I just left it on constantly and gets brick...I don't want the shit building up within my accesspprt. I guess my question is to the Dialed Mounts brand, how many people have you heard of having these ac issues and don't tell me none.cause then I know your lying as we already have 1 on here. And I want to state I already bought and own the mount but just curious and concerned b4 install.

[@manso21]

I'm looking for this product for my 2014 sti hatchback and I can't find it. Can you tell me if it's still available please?

[@SubiSpeed]

what part are you looking for?

[@manso21]

@@SubiSpeed I need the base of my access port that goes on the top left vent on the dash and I can't find it no where.

[@mysteriousguy019]

Might just get this one 😎

[@TrVlogs82]

Interesting. So cool, but it won't heat up the Accessport?

[@SubiSpeed]

nope, the vent still directs the air as normal towards the window.

[@TrVlogs82]

@@DETCOR @SubiSpeed thank you.

[@MrLuchoBigoton]

I miss this guy. Great vid

[@jGRite]

Is that a 3D print plastic?

[@loko4psp]

Yes it is

[@mrhavoc2415]

I purchased and installed this over the last weekend and I love it. The best mounting solution for an AP thus far. My only complaint is that it does need a light sanding to take away that 3d printed look. But install was quick and easy. Just keep in mind that its 3d printed and you can't wrench the crap out of it. Also, I've had zero issues with Subispeed as a company and the parts I've purchased through them. Their tail lights are phenomenal.

[@SubiSpeed]

🙏🙏🙏

[@cdbig9er]

AND.... they're always out of stock. :(

[@alexanderhess1977]

I purchased one in November 2021. Im aware they are not the manufacturer. I understood i would be on a waiting list, but wasn't aware i would still as of june 9 of 2022 be waiting. I contacted the manufacturer and they are still making them.

[@TheMigangel77]

So I just got the "back in stock" Dialed mount but a V3 showed up with no instructions at all and there is a 2nd piece I have no idea what to do with. Any pointers?

[@tomrakusan1179]

I had one. Switched to the A-pillar mount. The vent mount is 3-D printed and after a few months, it broke along the print “seams.” It looks great, but not really functional over time………..the A-pillar mount is sturdy and the AP is easier to read in that position.

[@chrischen5979]

Hi just wanna buy one , but my driver side on the right hand side, so have any product like this fit for my car , thanks a lot.

[@LT4_Gio28]

Soo yea I mean that piece that goes on the cable is not just a “click In” I won’t even go in into place

[@treycurran23]

Does the accessport not need to charge? Because the charging cord isn't long enough to reach that mount..

[@williammathis7628]

Do you guys make one for the 2004 SG5 forester xt?

[@danielhardin9047]

I worry about condensation with this

[@Ci3nfuegos]

Something like this but with a phone ?

[@BradlehDadleh]

@SubiSpeed, are you still planning on doing a demo video of the Buddyclub tail lights?

[@miguelcervantes3950]

I have a question if you have the Cobb you can buy the pedal comander too or is unnecessary thanks

[@SubiSpeed]

Unnecessary.

[@holdontv6741]

bro u need new shoes

[@ObiWanStromboli]

Can’t wait to pick one of these up when I get a wed in a few years

[@mikjamdig85]

I had my AccesPort hardwired and it kept draining my battery. Anyone else have that problem or know how to fix it?

[@drlewcifer6278]

Did you set it to auto turn off?

[@mikjamdig85]

@@drlewcifer6278 I believe so, it was never running when the car was off.

[@SincerelyBradley]

It’s a lot tougher than this video makes it seem, and I had to razor blade a bit to make everything fit, but it looks awesome. The absolute best solution to cover wires and an awesome idea. Blows every other mount out of the water

[@teknique1320]

Does this fit the 2017 Forester XT?

[@SubiSpeed]

It does not.

[@tommanning7337]

So the defrost won’t cook the AP? Especially in Midwest winters? 🤔

[@isaacgomez5730]

If the summer heat doesn't then the defroster definitely isn't

[@tommanning7337]

Isaac Gomez good point

[@mrhavoc2415]

Yeah, I leave mine in the car a lot during the Arizona summer and haven't had an issue yet

[@rodriguesscott]

Will this work for RHD models?

[@SubiSpeed]

Unfortunately, this can only be installed on the left side vent.

[@robertbakoczy1985]

@@SubiSpeed We do offer a RHD version now!

[@SOLIDUS-px3jw]

Where's the Forester?!

[@SubiSpeed]

Dialed Mounts doesn't offer a mount for the Forester.

[@SOLIDUS-px3jw]

@@SubiSpeed 😭 how bout anything Forester other than what you've already shown 🙂

[@richardwetzwlberger422]

How close does the top of the Cobb get to the front windshield. Can you still use a sun guard with the Cobb in.

[@SubiSpeed]

It is fairly close but not close enough to make it difficult to install and remove the accessport. I would think there is still enough room in there.

[@xsliick]

I always take my AP off when putting on my sun shade. Just too little room for my OEM one.

[@GastonMProductions]

Mine sits pretty close. Can’t even put in or take off the accessport without scraping the windshield a little and leaving marks. Definitely not enough room for my subie OEM sun visor. Might see if I can tweak it a little to make it fit better but definitely a little too tight for my liking

[@carlosxramirez]

Nice! Speaking of Defrosters, I ordered my Gurney 3 days ago and I still don't have a tracking number!!

[@SubiSpeed]

Carlos, you ordered on a Saturday. We are closed on the weekends so your order was not processed until Monday and shipped out Tuesday. Please check your spam folder for your tracking just in case it happened to go in there. It is scheduled to be delivered on Thursday according to UPS.

[@sirfrancisbacon4344]

Lol

[@ronniedarko2536]

SubiSpeed he was excited 😆 you should do 1 hour shipping.

[@madduck692002]

Imparing the drivers view, is illegal in some states. Wait till you get that hefty ticket. Whooo