COBB Tuning - Ecoboost Mustang Transmission Braking, Burnout Mode, and Bump Box

[@fread51]

Damn that's pretty cool all of that in one package

[@martymorrow597]

That birnout was big impressive

[@Moto_Mullarkey]

Is there anyway you're able to do the 2 step transbrake in sport mode and not regular drive mode?

[@bosssho3096]

Great Features, Nice Job. What Exhaust set up is that...sounds sick. Nice and throaty, and no tin 4 cylinder crap...

[@cobbtuning]

It's the COBB Turboback Exhaust: www.cobbtuning.com/products/exhaust/ford-turboback-exhaust-mustang-ecoboost-2015-2017 Kyle@COBB

[@alexn1243]

Need launch control for the 2019 mustang ecoboost why is it only for manuals!?

[@bryanbautista8520]

I have a problem with the tune, every time I step on it from 0mph as I shift the car begins to make noises from the intake around that area . Can you help me out ? I changed the RPMS to 6900 cause that's where I usually shift any help ?

[@jacobhetrick5577]

So once all of that is on and i do my run and just decide to start driving normally, can i drive normal daily with that trnasbrake on or do i have to turn it off and then start driving?

[@cobbtuning]

You can leave everything enabled and drive normal. The only time the feature would become active is if you were to engage it. - Marshall@COBB

[@nota5ohh388]

So I have a manual and have been trying to set my launch control but I don't know how to apply it such as does the car need to be fully on do I need to reflash the tune, or when I leave the adjustment page should it automatically set all of the adjustments

[@cobbtuning]

The car can be on or running. Make sure you press the center button when saving the LC RPM (not the left/back button). If you have issues, give us a call at 866-922-3059. Kyle@COBB

[@Zcypot]

TRC made something for supras that releases the clutch at a controlled rate for perfect launches, is that something that can be done with an accessport too? I am sure additional hardware would be required though.

[@cobbtuning]

I believe you're referring to a Clutch Delay Valve which is essentially just a restrictor placed within the clutch's hydraulic line. That is not something controlled by the ECU so the Accessport would not offer a solution on that front. - Marshall@COBB

[@LooneyLo]

Do y’all know if this is possible for a GT thru a ngauge or sct tuner?

[@zeroaviation]

Does the accessport have to remain plugged in for these features to work?

[@cobbtuning]

It does not. Once the map is flashed, you'll have the option to enabled these features. They do have to be enabled each key cycle. Once that is done, you could remove the Accessport if you wanted. However, most people would keep it plugged in which would be required to make any adjustments. Kyle@COBB

[@AKDMB]

Great song choice

[@SoGWestsofly]

For the burnout mode...what if you have the base model

[@biggun089]

Thats what im wondering. i usually just turn the traction control off and power brake.

[@TheSocialPraxis]

haha, I was wondering the sam

[@SoGWestsofly]

@@TheSocialPraxis lol I had to re-watch this video to see how the bump box worked, I never used it, or burnout mode cause I run the strip on street tires..... I don't even use the bump box but I might start cause I've had times where I staged and had to back up and the light turned green while I was building boost with the two step smh

[@SoGWestsofly]

@@TheSocialPraxis bumpbox and burnout mode don't work for base models

[@TheSocialPraxis]

@@SoGWestsofly bumpbox and transbrake are working on my Base EcoBoost but I am proTuned.

[@Sickazhell]

my APv3 doesnt even show the adjustments that you clicked to get into the page where the transbrake options are

[@cobbtuning]

If you update your Accessport and flash the latest map, it will: www.cobbtuning.com/support/step-by-step-firmware-update-instructions/ Kyle@COBB

[@Sickazhell]

COBB Tuning ok awesome appreciate the quick reply

[@Paper.Power.Politics]

Well I tried this on my 2019 ecoboost and didn’t work.

[@AliFazel]

So I flashed 502 and enabled these features, but they don't work. When I check my Access Port they show disabled. Any idea?

[@cobbtuning]

My guess would be the car not being up to temperature. If that's not the case, give us a call at 866-922-3059 and we can help. Kyle@COBB

[@AliFazel]

COBB Tuning what do you mean exactly by up to temperature? It was over 80° outside. I'll give a call later today

[@cobbtuning]

Coolant temp needs to be at or above 150 F, Trans temp needs to be above 120 F. Kyle@COBB

[@AliFazel]

COBB Tuning good to know. If it's below that, will it show disabled in the Access Port? That's what I was seeing. I'll verify later before I call

[@cobbtuning]

No. It just won't work.

[@lalito_f150]

Will this only work with the v502 maps?? Or can it be used with pro-tunes?

[@cobbtuning]

Currently only available on the v502 maps. It will be able to be added to your Protune with the next update for Accesstuner which is currently expected to be early September. Kyle@COBB

[@christiancarrillo54]

Do these options come with the Cobb access port? I just ordered mine from cjponyparts on Friday

[@cobbtuning]

Yes! They will work on any automatic EcoBoost Mustang on the current firmware. Kyle@COBB

[@curtdenham1876]

When I go to adjustments I don't have those options

[@cobbtuning]

If you update your Accessport and flash the latest map, it will: www.cobbtuning.com/support/step-by-step-firmware-update-instructions/ Kyle@COBB

[@curtdenham1876]

i just updated accessport and still only Change Map Slot, change TC Slip Multipler, and noble Traction Control

[@cobbtuning]

@Curt Are you still having trouble? If so, make sure that you also flash the latest map revision after doing the firmware update. The update alone won't help if the car is still on a previous tune revision. If you try that and it still doesn't seem to apply properly. Please contact [e-mail] we'll help you out.

[@curtdenham1876]

COBB Tuning I got it thanks

[@pengyuzhu6556]

mine isn's work, it just doesn't have the option for the trans brake. the firmware is latest...

[@cobbtuning]

Give us a call at 866-922-3059 and we can walk you through it! Kyle@COBB

[@sb632]

When is this update being released?

[@cobbtuning]

These features should be available in the next couple of months! - Marshall@COBB

[@richardp447]

Automatic or manual

[@TheSocialPraxis]

this video is for auto but I believe they have it for manual too.

[@bricklayerlzdp9825]

Still no love for the 2018+ ... I need that tc and 2 step

[@flightgearHD]

wym

[@stasg374]

What about us few people who still prefer to drive a manual transmission mustang Any difference any video for us?

[@cobbtuning]

You can't transbrake a manual transmission. Adjustable Launch Control for the manual transmission has been out for a long time. Kyle@COBB

[@SIRICKO]

Fuck this I wanna know what y'all doing for the new type r