Code P0011 FIX.Replacing the Oil control valve solenoid on a Hyundai/KIA 4 cyl

P0011 Camshaft position timing over advanced "FIX"
How to replace the oil Control Valve solenoid on a 2008 Hyundai Sonata 4 cyl
#FIX #P0011 #Oil Control Valve

[@mrikesterful]

Thanks, i hope this works . I was told also that i may need to replace intake Camshaft Position Timing . Is this an option if the oil control valve doesn't turn out the light ????

[@alphapakllc]

What size socket to take out the coolant temp sensor?

[@Singleturbocobra]

I believe it was a 19mm

[@jamessaxton4285]

Did this fix the code? I got the p0011 and the vvt solenoid tested good

[@Singleturbocobra]

Yes

[@Rubenchavez87]

Did you test it after it was out? Or just swapped it?

[@Singleturbocobra]

Pulled it and cleaned it and reinstalled it.It got better ,but came back 3 weeks later with the same code

[@_Therepenter_]

Can a bad one cause the car to shut down

[@Singleturbocobra]

Never seen it shut a car down,but it does control timing.So anything is possible

[@gerryrice4848]

No coolant came out after sensor removal???

[@LilcoIa]

Is the exhaust and intake valve the same? I keep getting the same code for both parts. Other code doesn’t fit my model. Got a Hyundai i10 2012

[@Singleturbocobra]

Unsure if the intake and exhaust solenoids are the same.Call your local dealer and see if the part numbers are the same to confirm 👍

[@JohnnyFriskey-et1mk]

Not a very good view of the job

[@Singleturbocobra]

@JohnnyFriskey-et1mk Thank you for the feedback. I will do better next time 👍

[@abitoutside1973]

​@@Singleturbocobradamn you for trying to be helpful...smh