Awesome project and cool way to get the massive address capability along with easy visual feedback!
@smert_okupantam Жыл бұрын
there is Ralay modules with optocoppler and transistor onboard. you can use some "pin extender" (shift register or I2C or Mega2560) . for convinience i recomend to implement a SD Card module with timing file, so you programm the µC only once and change only the file on SD card.
@CodeMakesItGo Жыл бұрын
That’s a great idea, would make configuration for a show much easier. Thanks for the suggestion and for watching!
@Marc_Miller4 жыл бұрын
Cool project, and pretty unique way to go about it. I welcome you to share it with the FastLED Reddit group.
@CodeMakesItGo4 жыл бұрын
Thanks for the suggestion, I posted it on there.
@alessi42494 жыл бұрын
Really nice project! Interesting mechanism with the DIY opto-isolator, could be very useful for other projects that need isolation. Was the main reason you went for the addressable LEDs to get the required pin output? If so I wonder if simply multiplexed shift registers might be a better method? (If the wires still need to be run individually from the control box), Alternatively you could simply use the WS2811 chip itself as the daisy chain slaves without the LED output and use it to directly control the transistors for each relay. I've also seen some people use black heat shrink to group the led and photo-resistor helps mechanically and with light. Awesome video!
@CodeMakesItGo4 жыл бұрын
Main reason for going with the light strand was so I could “see” the timing of the show without having to light fuses. I actually thought about shrink wrap from the LED to the photoresistor but would be a backup idea if the black boxes didn’t block enough light. I think we can all agree that using photoresistors is a bad idea to trigger bright fireworks. Was worried that they all could get triggered after the first one. Also thought the demux would be better but I don’t think you can have any combination on at the same time. Wanted that flexibility, let me know if that thinking is wrong. Great comment, it’s easy to see you have a lot of experience. Thanks for watching!
@alessi42494 жыл бұрын
@@CodeMakesItGo Thanks, that makes sense! I like the novelty of it :D I think you might be onto something in terms of using lighting control though as if it could interface with something like DMX lighting control that could be great. With the shift register method, you could simply chain several together to get the required number of outputs just 3 32bit shift registers should be plenty and would provide the constant output you're looking for no need for mux. Otherwise I think a multiplexer method could work, you would need to cycle through the outputs to have multiple triggered simultaneously as you say which will reduce the power to the e-match however I shouldn't think it'd care if the frequency was high enough. An LED Driver With Single-Wire Interface chip could be goodfor the application, in terms of individually addressable, constant output, but without the need for the LED to Photodiode conversion, Could also put your own LED so that you could "see" the output and timing but would require a significant amount more soldering. Again thanks for the video, I'm still learning and just enjoy videos like this on KZbin (as I guess you do ha) and think you're putting out great stuff! Kinda makes me want to have a go at KZbin honestly
@CodeMakesItGo4 жыл бұрын
@@alessi4249 You really should go for it (KZbin), especially since it sounds like you are already building things on the side and you definitely have the skills, great suggestions. The toughest part for me is talking to the camera, I talk to computers all day so it is still uncomfortable for me but trying. Let me know if you want to do a collaborative project one day, could be fun!
@KJG1979-h8r4 жыл бұрын
This was another great project..thank you for you creativity. I am a former performing artists now turning into a pyro.. you videos have been very interesting. This was a lil complicated for me though😁
@CodeMakesItGo4 жыл бұрын
Thanks Kevin! It was a fun project. If you start building a project for your choreography or pyro art and need help, let me know. I'll try to help you out. Thanks again for watching and subscribing!
@KJG1979-h8r4 жыл бұрын
@@CodeMakesItGo thank you for your generosity. I will definitely let you know either way...stay safe!
@Patat0four3 жыл бұрын
Excellent idea, but waaaaay to much wires that can be ripped off or burned, especially because they are connected sequentially, if line is severed, you lose the rest. I would put everything in a large and robust enclosure with quick connect and run e-matches wires to that control box. I would also be worried light bleeding inside the modules from explosion, accidentally triggering other modules.
@CodeMakesItGo3 жыл бұрын
Totally agree, this was a concept that worked but has some significant flaws. The largest being, don’t use a light sensor to trigger bright explosions! Thanks for watching and the comment, hope you enjoyed the video.
@santoshdadi75482 жыл бұрын
For Your creative levels hats off sir its really excellent
@KTX6664 жыл бұрын
didn't a lot of the ignitors fail in the fireworks display? the lights went off, but no fireworks? cool project though :-)
@CodeMakesItGo4 жыл бұрын
Yes, and very good eyes! Some did not work (8 total), there were also some fountains off screen that did work but we couldn't see. The biggest miss was a series of 5 triggered at 10Hz, only 4 of them worked :-( Needs a redesign for Rev2 next year. Thank you very much for watching.
@pinoypyrouae233 жыл бұрын
Its a nice work, would love to have a copy of the circuit and the software you are using....thank you! -from the Philippines
@alticetube3 жыл бұрын
Everything should be here: github.com/CodeMakesItGo/FireworkController let me know if you have any questions. Thanks for watching!
@CodeMakesItGo3 жыл бұрын
alticetube is my other account, forgot to sign into CodeMakesItGo when replying.
@kjarby692 жыл бұрын
Very well done!!
@CodeMakesItGo2 жыл бұрын
Thank you, I think this one turned out better. *Easy* Firework firing system you can build fast! kzbin.info/www/bejne/jmOcknaXbNd6p6c
@SanukaSenumitha3 жыл бұрын
Super super project
@cptcrazyfingers96393 жыл бұрын
Awesome!
@CodeMakesItGo3 жыл бұрын
Thanks!
@santoshdadi75482 жыл бұрын
Hi sir can you help of fire cracker tree making
@Aion_003 жыл бұрын
I love the idea. I was wondering the board you design, is there anyway I can get that design?
@CodeMakesItGo3 жыл бұрын
Thank you, I’m currently making an updated version right now. Very easy build. But here is a link to the gerber files. github.com/CodeMakesItGo/FireworkController I used www.easyEDA.com to design and order the PCBs. Let me know if there are any questions.
@CodeMakesItGo3 жыл бұрын
Here is a video to the new design: kzbin.info/www/bejne/jmOcknaXbNd6p6c
@AW-Services7 ай бұрын
I'd stay away from using cheap Chinese 315 & 433mhz wireless. Bloody dangerous adding electric match to a non static canister shell which will leave the tube and snag due to it lifting. You didn't think about that
@cropyrotechnics53684 жыл бұрын
How many days need you to build this???
@CodeMakesItGo4 жыл бұрын
Took me a little over 3 weeks. Started the first of June and sent out the controller to my friend on the 24th.
@cropyrotechnics53683 жыл бұрын
5:26 Man can you tell me how you build this??? Thanks😃
@CodeMakesItGo3 жыл бұрын
Yes! The internals for this box used a small remote relay. The link to the exact one is here: amzn.to/39I31Ph From there you can get any project box you'd like, I used something small like this: amzn.to/2YGoxPi and I used an illuminated toggle switch for Power. I couldn't find the exact switch but here is something similar: amzn.to/3rhLbK8. From there is depends on what you want to do with it but those are the main components. The remote relay is small, but you can use it to trigger a larger relay that can handle more current. Hope that helps!
@cropyrotechnics53683 жыл бұрын
Thank you👍
@dankcincy Жыл бұрын
While cool....you can buy them for way cheaper than the work involved.
@CodeMakesItGo Жыл бұрын
Thanks so much for watching. Your definitely not wrong. This was more of an experiment that turned out to be a not-so-great idea. Guess they can’t all be winners 😂
@dankcincy Жыл бұрын
@@CodeMakesItGo That's the way it goes sometimes but you do learn along the way which makes it worth it.
@dirtyinthebathtub79212 жыл бұрын
DOPE! >:D
@santoshdadi75482 жыл бұрын
Plz tell about fire cracker tree with arduino by using pixel leds ws2811
@CodeMakesItGo2 жыл бұрын
What is a firecracker tree?
@santoshdadi75482 жыл бұрын
@@CodeMakesItGo kzbin.info0-rjkUVl1KI?feature=share Please watch this video sir
@CodeMakesItGo2 жыл бұрын
Oh nice, yes we can definitely make that. Are you interested me building this or just telling how to make it yourself or both?
@santoshdadi75482 жыл бұрын
@@CodeMakesItGo both sir because if you done means it's 100% perfect and clear
@CodeMakesItGo2 жыл бұрын
Haha good point
@dirtyinthebathtub79212 жыл бұрын
Muahahahahah!!!! >:D
@juansilvestre5748 Жыл бұрын
Useless
@madgadgetuk3 жыл бұрын
This is a terrible idea.
@CodeMakesItGo3 жыл бұрын
It did work but I don’t think using photo sensors to trigger fireworks is generally a good idea. Any other reason this was a terrible idea? Thanks for the feedback.