I bought these replacements a while ago, they came nicely packaged and everything and they looked and fit great on the headphones, unfortunately to be honest they lasted less than the originals, breaking at about a week or two of normal use at best. I guess ymmv depending on wether your head is on the larger or smaller end which I suspect is why these didnt last much at all. I really like the headphones but this one design flaw of the headphones themselves has prevented me from using them at all.

How did you make the adjustable laser module mount? Im working on somthing similar.

Thanks for the video, I would appreciate it if you share a link to the 3D model

Nevermind, i found the link, thank you so much!

Link is not working. Is it possible to buy/get that digital print file anywhere?

First time seeing your videos. This was hilarious to watch. The humor is as good as the project.😊

Is there a place i could reach you at for some questions? Really enjoy your time and effort.

Are these coming back in stock? I don't have access to 3D printing to do what the other person did :(

I sure would like to order new housings from your link, but they were sold out when I went there. So then I noticed down below (under You May Also Like) there is another option where you can download the digital print file. So I ordered the digital print file. The file came to my email right away. Now all I need to do is ask a friend with a 3D printer to print them for me. That works for me. Thanks!

I bought a box of 'stuff' at an auction, got home and found a Yuneec ST10 radio & CG02GB gimbal camera. The radio boots, charged up, the camera initializes and does it's thing but until yesterday, I'd never heard of Yuneec. There is a plethora of these things on the used market and they are ripe for repurposing so don't be surprised if this well made video starts getting more traction all these years later.

I am trying to build one of these, do you have any advise on the code, and or software?

✨✨👏🏻👏🏻

Very cool - I can't wait to try this build.

Rename to easy bird killer

I'd stay away from using cheap Chinese 315 & 433mhz wireless. Bloody dangerous adding electric match to a non static canister shell which will leave the tube and snag due to it lifting. You didn't think about that

is there a step by step that shows how to work with these apps? i've got the two git projects to compile in vs2022 but i'm not sure it's all working right? i can make a csv file but can't get any real-time processing working? compiled apps just freeze. thanks.

Instead of the garage door switch and Arduino, you could have just used an MHCOZY or SONOFF 4ch switch. Way better control over the door and way easier to replace if something goes wrong.

I’m impressed in HOW UNDERRATED is your channel and videos!! Your are incredible! You created something VERY important. PLEASE!! Try to sell it to other ViewMaster collections in order to preserve this treasure of our history that will soon be gone… as the slides are getting older and older with time… thank you so much for your work.

you are now on my awesome persons list ! - this is so well crafted !

IS IT POSSIBLE TO SEND ME A COPY OF THE EXCEL FILE THE LINK IS NO LONGER ACTIVE

One of the best chicken door projects I have seen using arduino and some ingenuity. I hate to copy other people's work, however this looks so good that I don't see any reason to change anything. This is my next project as I'm going away for a couple of days next month and don't have a chicken sitter :) Also in the UK the cost for an off the shelf solution is around £250!!!

do you know of a VM reel called"something and beings from the 5th demention " trying to remember the proper name it was around 1970-80.?

Will this setup work with solar power?

Where did you find the center lens?

Simple in concept and on a small scale like one to 5 targets but the real fun becomes wjen ypu got 20-30 targets and gotta have animattonjcs move and make noises when hit and the software lol

Awesome video! A simple question… the current that flows from the battery directly to the ignition fuse should be limited by a resistor? Because I would try a similar project with a LiPo battery but I’m a little skeptical about the massive current that can be generated from these batteries…

Did you ever have the 2nd part to this?

Could the relay boards be powered by momentary switches?

Anyway to pay you to make me a laser rifle like this one? I am putting together a wake the scarecrow game and need a western style rifle that shoots a laser

How did you code everything? I am planing going the same route

Awesome quality

Just found this video - awesome work. Does that mean that I can now use Google Earth to create a 3D waypoint set and send this to the Q500 for it to fly? Or am I missing a step?

Wow, that's a great project. My 85 yr old mother-in-law just showed me some viewmaster reels taken of her wedding in 1958 and asked if there was anything I could do with them. There are about ten reels. Started searching and your project came up. It does seem like a fun project but also a lot of time and effort for just 10 reels. Do you know of anyone who could do the scanning for her? Thanks for posting!

Couldn't this build be expected to struggle a bit at even the arduino 6V max current? Just based on the generous assumption that we'd see anything close to 4A with even an industrial-grade IoT efficient power supply, or even fairly arbitrariy estimates of ohms/resistance..it seems like the pacing would need to be kept at 'easy listening'. pretty much the entire show... It might be a decent thing to also toss out a disclaimer indicating that this may not be the safest way to go either - since underpowered systems can pose some pretty unpleasant risks, i.e., Unreliable or erratic ignition: If the current demands exceed the capabilities of the GPIO pins, the ignition of fireworks may become unreliable or unpredictable. This could result in misfires, delayed ignitions, or unintended firing sequences, which can create unexpected hazards.- like setting fire to stuff you'd normally try to keep from turning into piles of ash, like your house, friends, DIY 'Mr. Fireworks', etc.. anyway - although I'm not generally one to barge in with the intention of sucking all the joy out of what I fully consider honest and pretty inspirational efforts at innovation - having felt myself getting a bit too carried away oblivious to some of the pretty real dangers, it seemed only right to throw a caution out - since that's not something that seems to have gotten proper emphasis among the comments I have read so far... Given what I've seen the arduino spec'd per pin at 40mA max - nevermind how those who are most typically drawn to the spectacle of making things vividly explode in the air are so often regarded as much less impulsive and naturally more resistant to such unacceptable breachd of decorum in triggering multiple parralel ignition cues never once in tight orchestration with AC/DC's "Riff Raff", and couldn't possibly be so undisciplined as to deplete a ~3A power budget prematurely in a 'brown-out' that choppily disrupts/halts what would have likely reached a much more thrilling apex with the availability of ~10 additional amps. Anyways, I'll be done now. Thx :)

How much would it cost for you to build these and sell them??? Aweseome job!

Awesome project! I'm a scanning nerd, working with high end drum scanners and flatbed scanners. Just a little tip for improving the image quality relatively cheap and easy: I would replace the LEDs with high CRI white LEDs or use the RGB LEDs as single channels and combine the three images to balance out the color. Lots of scanners scan in RGB, as in the past white LEDs weren't as color accurate

"Promo SM"

While cool....you can buy them for way cheaper than the work involved.

What is the range when using the remote to fire it?

Mr. Jason Altice, Bro, You are great. Very very interesting, Uncommon fun project. Thanks for your marvelous , wonderful project . Your tireless work, dedication behind every project is truly instructive, Thanks for everything.

Dude, this is amazing! I have a tiny ASMR channel that features assorted collections. On deck is a collection of several dozen view master reels, so I came to KZbin to see how I can "scan" them for viewers. Your invention is far beyond my abilities to use, but it's really awesome!

I would like too build my own shooting galley can I get a copy of the stl files so I print out the targets?

How do I get the 3D model for my Ender 3 😢😢😢

I Had one and so Enjoyed it!!!!!

Very Cool!!!!

Just saying, you could connect up the filament tap on the transformer for that tube on effect (if the filaments even worked), then again no one would see it from the front. Regardless, you just hit a home run with that project! I tip my hat to you sir,

This is AWESOME!!! I’m also a software dev who hates stand ups, and I want to build my own version of the Buzz Lightyear shooting ride at home. I’m so glad I found your video! Super helpful; very funny. Thanks so much!

Looks really great, thanks a lot for sharing this ! I'll make one but I will email you with questions ;-)

Great stuff. Made me smile. Really enjoyed the UCB framing device. As always dug watching the build with all its fun little challenges. Thanks so much, you and your channels (CMiG especially) deserve much more exposure than the artificial stupidity of the Failgorithm provides. Hope this year is a happy and healthy one for you and yours.