CODESYS Quick Start using Weintek Remote IO & HMI

[@floydperdway]

I am new to Weintek & Codesys and have viewed this multiple times. It is very helpful and I would love to see more. Thanks!

[@JoelPage-ff2rp]

My Add Object selection under application doesn't have Symbol Configuration as an option. Am I missing something? (I had to downgrade CodeSYS) Would it be possible to upgrade Weinteks libraries?

[@jsg19x]

Im having a problem with an iR ETN, all the lights are blinking (ETN and IR green and red) and cant make it work. Last time it let me read the IO EasyRemote say something like BOOT MODE

[@electrichospital4024]

Please make a new tutorial for outseal plc with weintek easybuilder pro

[@RickThePeasant]

With a usb 4G dongle for remote connection and EasyAccess+cMTViewer, can you download both the Easybuilder and Codesys project remotely? Is all the data in the one Easybuilder project so you only need to download one project?

[@WeintekUSATeam.0]

Hi Rick, You may use EasyAccess 2.0 to download both the EasyBuilder Pro and Codesys project remotely. If you have already compiled your Codesys application you can download both the EasyBuilder Pro and Codesys project simultaneously using the "PC -> HMI" button within the EasyAccess 2.0 application.

[@spiderdude1013]

im not getting a prompt for the ethernet in the miscellaneous tab, what do you thing is my problem?

[@WeintekUSAInc]

@spiderdude1013, The "Ethernet" driver can also be selected by expanding the "Fieldbusses" section of the "Add Device" menu. I hope this helps!

[@joejansen7029]

CMT3102x with IR-ETN, and none of this works. Screens don't match, PLCOpen.xml doesn't import, it just is not accurate anymore.

[@spiderdude1013]

I had the same problem, I'm using a weintek HMI and IR remote IO and it doesn't show up for me

[@WeintekUSATeam.0]

Hi Joe, What version of Codesys are you using within your application? If you are unable to import the PLCOpen.xml file into Codesys please contact our support center at [e-mail] for assistance.