Coilovers install on honda accord 2018-2022 10th gen accord tein flex z coilovers

Complete Bolt on coilovers no extra parts needed you use same front Suspension links No need to use TOP HAT of back Strut it comes with it already Some of toque secs Were wrong this are it ..
‼️Front strut specs: top 44bs
Pinch bolt 61lbs
Suspension link 30lbs
‼️Rear top of strut 30lbs
Sway bar link 35lbs
Botton of strut 58lbs
Big Screw hold spring bucket or arm 51lbs
Front install : 1:55
Rear install: 9:50
Front adjustment Height 19:00
Rear adjustment height 20:50
#tein #Tein#honda #hondaaccordsport #accord #coilovers
Check this video • One Year On Tein Coilo...

[@elegymusic]

the most informative install by far. going to use this for my BC coils to install

[@JRod.Cuztom]

Thanks ..appreciate it …sounds good 👍🏽

[@ninabelcher8352]

Definitely most well rounded video, thank you. I could actually SEE what you were doing. About to take on this myself so I gotta work smarter.

[@JRod.Cuztom]

Glad it was helpful!

[@lionelpobre7025]

Thank you for this Video!!! shop that installed mine messed up! now i have to do it myself just to get the height and ride that i want. awsome job guys!!!

[@JRod.Cuztom]

Np thank you

[@victormelendez4669]

Looks great!! I wish I was as handy as you to install all the cool options. Looking forward to your vehicle drop n wheel swap

[@JRod.Cuztom]

Thanks all you need is tools and patience

[@chinorosario4035]

Aprendo mucho viendo tus videos carnal saludos desde New Jersey ✌🏼✌🏼✌🏼✌🏼

[@JRod.Cuztom]

Gracias primo 👍🏽

[@malonesizelove]

Sick ride, bro!!

[@christophermartinez5314]

Excellent installation

[@JRod.Cuztom]

Thanks for the support

[@DonaldMendez-eu7ef]

Good video.. helps a lot bro . Great info

[@JRod.Cuztom]

Glad it helped

[@RAMONEAuto]

Exactly how I want mine to look I been on the fence a whole year now about lowering mine cuz I daily drive it

[@JRod.Cuztom]

This one is too lol

[@teamhonzilla]

Love it even though it look complicated lol but ya ace it.

[@bj10jgo]

What a cool dad! My dad would have yelled at me for changing any parts on a fairly new car.. lol

[@JRod.Cuztom]

I know right 🤣🤣 thanks for the support . She is a very responsible young lady and pays for her owner car and bills lol. It was not free🙃😂

[@IMGbaugher]

Great video.

[@rizkybiss]

dope video

[@ponyland9999]

I took them off after 4 days and went back to springs. Tein flex z are Loud and clunky. I learned my lesson. Go with bc

[@JRod.Cuztom]

Sucks.. on mine so far so good did you install yourself

[@JRod.Cuztom]

Are you trying to Sell me bc coilovers

[@ponyland9999]

No I had a shop that specializes in lowering suspension. He said the rear top mounts on teins are known to be crap. He will be installing airlift for me next week. I really liked the color of tein lol

[@ponyland9999]

@@JRod.Cuztom no not selling anything lol. I just don't want anyone experiencing the crappy couple of weeks I had from dealing with these coilovers

[@JRod.Cuztom]

@@ponyland9999 kool bro I understand these are my first coilover maybe in future I’ll get some better one everyone learns from their mistakes thanks for the input appreciate it

[@elvissantiago5115]

Looks awesome looking to do the same on a 2022 you still have it on 2" gap how's it going thanks

[@juniorreillo264]

Nice

[@modakaification]

How's the camber adjustments on those coilovers? Im debating on getting some for my 10th Gen.

[@JRod.Cuztom]

You could only adjust the front on top of coilover it has 4 L key screws

[@RoyceDelSol]

are those torque specs correct cause in the video you mentioned a different number than you had

[@K.dot.03]

Your whole family has accords bro Thas a win 😂

[@JRod.Cuztom]

😂 just my daughter

[@veeeesh]

Hey, quick question, how low is that accord sitting front and rear in terms of inches? I bought the same coilovers for my 2020 accord sport 1.5T and I plan on just going 1.25in front and 1.5in rear. I just wanted to know what your specs are, thanks!

[@JRod.Cuztom]

It’s like an 1in .5 to 2in drop

[@leonardovicente2683]

Una pregunta cuando pones los Coilovers te aparace alguna luz en el tablero por que hay algunas suspenciones que dicen que no tienen ADS yo tengo un accord sport 2021 2.0t te agradecería la información saludos

[@JRod.Cuztom]

Only on the touring model

[@JesusPerez-nw3vi]

Hey dude I seen this video is 2 years old did these coil overs run nice I seen some good and some bad just wanna know if these are good or spend the extra bucks and get bc coilivers

[@JRod.Cuztom]

In my opinion I like bc racing because they can be rebuilt and the tien can’t

[@stylinhonda]

Did you adjust the dampening or keep the settings recommended by Tein? If you adjusted, what settings are you on?

[@JRod.Cuztom]

I put it in the middle 8

[@JRod.Cuztom]

Make sure to go all the way to the right to it hard then go back 8

[@DavidCruz-gh3ll]

How are the oem Honda endlinks holding up? I’ve seen some people say you need aftermarket ones

[@JRod.Cuztom]

I always use oem never had problems

[@CCUSTOMZZ]

So what’s ride height.. front and rear??

[@rafaelroman5649]

Hey bro, do you know if these tien flex Zs have rear adjustment? I know the front has knobs but I didn't see if the rear had any knobs to soften and harder the rear coils

[@JRod.Cuztom]

Yes they do

[@rafaelroman5649]

How do you tune the rear coils? Is it on top of the shocks?

[@JRod.Cuztom]

@@rafaelroman5649 it on the top of shock you have to adjust before installing

[@sacramento7721]

To adjust the damper on the rear, you would need to drop the shock to adjust the knob huh?

[@JRod.Cuztom]

Unfortunately, yes

[@thosetwodudes]

How did the handling and cornering change? And negatives or regrets after install?

[@JRod.Cuztom]

Very well and plus it has damping so can control stiffness of the ride

[@reggieb532]

Nice job….. how does it ride vs stock?

[@JRod.Cuztom]

It ride good on coilover the lower you go the more you lose the comfort in the ride. But it not bad In my opinion

[@JRod.Cuztom]

Thanks you

[@tijomathew3119]

Would these coils work on 2021 Honda Accord 2.0?

[@JRod.Cuztom]

Yes I originally bought them for my 2021 accord 2.0

[@JulyOverland]

Are they much stiffer than the original ones?🔥🔥🔥

[@ponyland9999]

Very stiff! Over stock no matter how much you adjust dampening

[@JRod.Cuztom]

Not that bad revving

[@4cylcoupe]

I watched your video installed mine, and my front driver side coilover clunks and the ride is overall bouncy like kangaroo bouncy. Any suggestions, the tophats are tightened

[@JRod.Cuztom]

Tighten t the damping knob all to the right

[@JRod.Cuztom]

The noise most likely is the endlink it not tight enough you have to use a Allen key and a go thur shocket to tighten properly or impact gun

[@JRod.Cuztom]

kzbin.infoibexTNQqiWo?si=codR7RSRMu10H1Vm 18:15

[@JRod.Cuztom]

18:15 on video

[@Xccord]

Looking for some new coils do u like the tein or the bcs better? Im stuck between the two

[@JRod.Cuztom]

I only have them for like a week it’s hard to say.. I liking the bcracing because they are Rebuildables you can change spring change damper(shock) you can order any part you need if something breaks. The question is how low do you want to go.. bcracing standard or extreme low

[@Xccord]

@@JRod.Cuztom u said u alrdy maxed out the lowest for the bcs right? I might just have to get the extreme lows then lol lowk wana be lip to fender 😅

[@JRod.Cuztom]

@@Xccord what coilover do you have now?

[@JRod.Cuztom]

For sure bro the back went low but front before of aircups.. but yea extreme low is 🔥

[@Xccord]

@@JRod.Cuztom i got some ebay coils lmfao i should have just invested in some bcs cus now im alrdy tryna get new ones smh 🤦🏻‍♂️🤦🏻‍♂️

[@tijomathew3119]

Can you provide a link to the same coilovers please?

[@JRod.Cuztom]

www.ebay.com/itm/Tein-Flex-Z-16ways-Adjustable-Coilovers-for-18-Honda-Accord-1-5T-2-0T-CV1-CV2-/283624983338?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@Wnderkid8]

Where did you get the wing for it ?

[@JRod.Cuztom]

www.ebay.com/itm/FOR-18-2021-ACCORD-JDM-V2-PLATINUM-PEARL-WHITE-HIGH-KICK-DUCKBILL-TRUNK-SPOILER-/224159704614?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@hooami6245]

can you say all coilovers for the 10gen accord install this way? i have some cheapo rev9 coilovers that i want to use this video for.

[@JRod.Cuztom]

Yes just make sure that on the front you put the little pin inside the pinch bolt to line up the coilover

[@jayz_moto]

Did you ever install those coils?

[@user-cn2mx2uz7g]

Que coilovers son mejores bc racing o tein flex z?

[@JRod.Cuztom]

Me gustan bc racing extreme low

[@sylent9]

Hey brother are you in SoCal? I stay in San Fernando and have been trouble finding a good price to get lowering springs installed on my 2018 Acura TLX. Do you know any local installers?

[@JRod.Cuztom]

Yes.: what is a good price?

[@sylent9]

@@JRod.Cuztom You tell me brother. The most expensive quote has been $300. I remember getting springs installed for aout $150 two years ago

[@JRod.Cuztom]

@@sylent9 yea that’s what I paid they said that they have to take out something else, and that is more work

[@JRod.Cuztom]

@@sylent9 i payed 250 2yrs ago and my daughter paid 300$ 1yr ago what to can do is have them do front and do the back yourself if it independent suspension

[@sylent9]

@@JRod.Cuztom do you know any reliable installers here in the Valley?

[@axelmorales6070]

Bro, I tried to change it 2hrs ago, but I couldn’t remove the coilover because it was long, How did you do it? (3:24)

[@JRod.Cuztom]

Keep one nut tightened on the top push down with foot or hand and move to the side then remove last nut front top

[@alexisizaguirre4676]

Do you know what suspension that wrx is running ?

[@JRod.Cuztom]

3p airlift system 2 compressor 5 gallon tank

[@JRod.Cuztom]

instagram.com/samy9o9?

[@2196jimmy]

How long did installing it take?

[@JRod.Cuztom]

2-4 hours

[@chuckim1453]

Verdad q no se necesita comprar censores para poner coliver

[@JRod.Cuztom]

Nomas para el touring

[@jorgevillacis8127]

Why you didnt corner balance the car ??????

[@JRod.Cuztom]

It was an installation video the got adjusted after

[@user-cn2mx2uz7g]

Cuantas pulgadas lo bajo amigo?

[@JRod.Cuztom]

Como 2 pulgadas

[@user-cn2mx2uz7g]

@@JRod.Cuztom cuando se baja es necesario ponerle los camber de adelante y los traseros para que quede bien alineado? Agradesco su respuesta .

[@JRod.Cuztom]

@user-cn2mx2uz7g no Solo para el desgaste de las llantas

[@stayinglifted248]

You got the link for the coilovers?

[@JRod.Cuztom]

www.ebay.com/itm/Tein-Flex-Z-16ways-Adjustable-Coilovers-for-18-Honda-Accord-1-5T-2-0T-CV1-CV2-/283624983338?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@stayinglifted248]

@@JRod.Cuztom thanks 💯

[@ponyland9999]

Go with bc for $30 extra.

[@ponyland9999]

The rear right was faulty from the start. It bottomed out hard over small bumps.

[@JRod.Cuztom]

@A Abad true but on the tein you do have mess with the rear shock top mount it come with it already it’s a complete replacement

[@TheRealChrisMills]

Waste of money cuz you didn’t even drop the car lol