Cold and Dark Start up "Airbus A350 XWB Advanced Version" Tutorial: Flight Factor for X-Plane

[@Goodlandings]

Thanks for watching this Airbus A350 XWB Advanced version Start up tutorial. If you enjoyed this video please leave a thumbs up, and consider subscribing to the channel to never miss a future upload. Moreover, would be more than happy to answer any questions you might have in the comments section below. Thanks for watching, and more importantly, good landings! If you face difficulties starting an Aircraft in the Cold & Dark State on XP11 or XP 12 I've posted a quick tutorial video on my channel to help you out: kzbin.info/www/bejne/hqOVaHuoet52ors Thanks for watching!

[@ChemistryProfessor00]

Even though I’m 11, I learn about aircraft systems. So I study a lot and everyday to be prepared for the flight school. I learn how to start engines, how to deal with warning sounds etc. Thank you for the video! Now I know how to start A350! I only knew how to start A320..

[@casasottomarina8416]

I do the same and I am 13

[@fibecheee]

You're gonna grow up to be a great pilot young fella, don't let go of your dreams. Study hard and watch your health. You got this

[@AviationNoor]

doing the same thing at 15

[@Alislug]

Same right here

[@Alislug]

@@AviationNoor YOOO LEGIT THE SAME BRUH XD

[@urlocalsam]

this is what pilots consider as ASMR

[@boeingpilotz]

Yessir

[@flightsimactu7700]

Thank you for this understandable tutorial, very useful for beginners with the A350.

[@Goodlandings]

Thanks!!

[@Craig-f6o]

Straight to the point , thanks so much

[@chillegaming1837]

Very Brief and informative tutorial ,Thank you !

[@Realflight1986]

5:00 Maybe there's food or remains of people..... wow, I didn't expect that in the same sentence. :)

[@gameonsilver]

Nice vid. Thanks 👍🏾👍🏾👍🏾. Also to hear what the flight attendant has to say from the bepping sound. Turn up the volume from the center pedestal, you can do this by finding the PA Knob on the left of the centre pedestal (together with the Radio frequencies select panel)

[@theworldofflightsim.1169]

Thank you!

[@cabinetexpertisedrteboul667]

excellent tutorial

[@Goodlandings]

Thank you!

[@italkapple.mac.istuff.7876]

Super helpful video. Thanks. Anybody know why the X-Plane 12 ATC won’t work with this aircraft? I’ve never had a problem with any other aircraft having compatibility issues with XP.

[@grantdominicbiasca3644]

Nice, i clearly understand the tutorial 😁 hoping there's more coming ❤️

[@Goodlandings]

Thank you!

[@vipannath4095]

Good Job.. Thanks

[@Kr3aMo1]

Nice video! Although it’s an old video, did you have any issues with the cursor not working during your flight? I’m unable to press anything during my flight.

[@flightsimactu7700]

AT 11:14 Now with the latest version is there a way to load a flight plan directly from simbrief?

[@Goodlandings]

Yes, you definitely may generate an OFP with Simbrief which you may then manually download, and place in your \Output\FMS plans folder. Then on the Init page on the FMS 1 on your aircraft page just press the RTE select page, the route will then be available for you to apply.

[@flightsimactu7700]

Thanks for your replies. I will have one more question regarding the checklist & the cold and dark procedure. I can see on your video that you are not following the check list . How does it works? You start first the plane like you are showing and you ceck the list after to see if everything is done or you should start the plane by applying step by step following the check list? (ifyou understand what i mean).

[@Goodlandings]

Your welcome! I personally just use the checklist screen for reference. However, if you would like to use it, just know that's its divided into phases. So begin by clicking on the phase you're currently on, such as TAXI for example. After entering the TAXI page, the steps are all vertically laid out in white text. Follow them from top to bottom, then once done with the entire page, begin clicking each one in that identical order. They should all hopefully flash green, meaning you've correctly followed the steps in accordance to how the developer of the aircraft intended the checklist to function. You'll then return back, enter into the next phase when ready, follow all the steps on that page, then again click in a descending fashion, so they all flash green, then move on to the next phase. However, I honestly wont regard all the procedures or steps in the checklist as absolutely necessary. And just keep in mind that in real life, airlines each have different checklists and procedures which depend on the aeronautical authority or agency they are registered under, the aerodrome they depart from, the route they are planning to fly, and weather conditions. So checklists and procedures are for the most part designed to fulfill and abide by requirements pertaining to that specific authority which the airline operates under, whether it be FAA, GAA, EASA, and are then further adapted or modified by the airline. However, also keep in mind that though this is one of the better simulations, it still does not capture all aspects relating to the correct operation and procedure for a real airbus. Thanks!

[@flightsimactu7700]

@@Goodlandings Ok, ok.....I start to understand . Thanks for your time replying ;) You should maybe come to the X-Plane A350 support forum to share your experience. It looks very quiet when you ask a question there :) forums.x-plane.org/index.php?/forums/topic/242262-cold-dark-how-does-it-works/

[@Goodlandings]

@@flightsimactu7700Your very welcome! I'll definitely check it out

[@imhearsay]

Does this plane show the block time? I only see the flight time

[@sparshthakker6776]

Yo where did u get the A350 from?

[@randomfset]

How’d you get it to start in a cold and dark state?

[@duriansnkrsmy]

hi sir, may i know why my xp12, although selected cold & dark under customize but i notice some of them already turned on right after i switch my battery on. for example on the overhead panel the cabin section is all turned on instead of being white

[@apparentlyzak]

Is it necessary to use the inbuilt pushback? B ecause it wont work. I have betterpushback and im using it.

[@irishaviator7513]

Nice vid

[@Goodlandings]

Thanks, glad you enjoyed it!

[@yessinebenromdhane2004]

after the first time i used the aircraft it wont open in the cold and dark state again any help please ?

[@justsam_1792]

is it the same for xplane 12

[@Goodlandings]

Yes!

[@znek4288]

The MCDU of the a350 is ass but I love flying this airplane so much. I hope I'll get used to it one day. Ps I'm coming from the magknight and this is worlds better

[@gio-zq6iq]

Can you possibly make a checklist for the procedures you did in the video and send it via reply?

[@sarahv6275]

I don't know if you'll reply to this but, I keep getting faults in my bleed air system after I start the engines and power down the apu.

[@Goodlandings]

Try the same procedure and sequence on the overhead panel as shown in the video, that should hopefully solve it.

[@petrnovak4760]

What is this simulator called

[@Goodlandings]

This simulator is called X Plane 11, you may also try the newer version X plane 12 in steam

[@amppro4994]

Easy tips: basically press button with light in overhead panel,right? Edit: I MEAN NOT THAT FAULT BUTTON 😂

[@apparentlyzak]

yeah ahah

[@Crocodebil]

all white lights off yhhh that's like an airbus rule

[@kikorro555]

When I get to the F-PLN tab, I can not select the approach of the airport I a heading to, why is that and how can I fix it

[@Goodlandings]

If certain aspects of the airplane are not operating, I would suggest you check the current patch of the aircraft you have. This is the latest one released, its free and you can find it from the platform you've bought it from if you already own the license. However, if you already have the latest patch of the aircraft, I recommend scanning your x plane files again and check for updates, or redownload the aircraft folder then replace it with the older one.

[@kikorro555]

@@Goodlandings I have the plane cracked so I will have to wait =(

[@junbinliew8683]

how's it on fps? heavy?

[@Goodlandings]

The performance will depend largely on your chosen presets. On maximum presets it can be rather demanding.

[@cannsayinn]

can you give to me your xp11 plugin list? thanks :)

[@Goodlandings]

Hey! Sorry, but I don’t really use any plugins for xp11

[@balwantsinh531]

It's xplane ??

[@Goodlandings]

That’s correct!

[@anthonylong5941]

hey you must eat lots of carrots so you can see well in the dark

[@juliankempf6286]

how can i set the Cold and Dark mode?