Coleman 196 cylinder head on the 212 Ghost how will it run?

Coleman 196-cylinder head on the 212 Ghost how will it run?
Installed a Coleman 196cc cylinder head that was ordinarily used on the Coleman CT200U-EX minibike, and swapped it onto the Predator Ghost-powered Azusa minibike. Tested the bike from 0 to 30 and top speed.
Azusa minibike Playlist -
Subscribe for more minibike content: kzbin.infofea...
Instagram - Doubledown555Black66
_____________________________________________________________________________
Parts used -
Predator Ghost - www.harborfreight.com/212cc-g...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

[@cohocarl]

You are running a very nice channel. Resolution, lighting, editing, sound, length of video, etc are excellent. Thx.

[@Black66]

Thanks! Thanks for watching the videos! 👍

[@Spacecruizer203]

Beautiful comment I gotta say....thanks for helping out

[@kipwyand7869]

I really enjoy how you go into each test with no pre-conceived notions about performance. Simply no-nonsense comparisons. I really appreciate your contributions that help so many people gain performance. You always make it look easy too, something I greatly admire. Great job Black66!

[@Black66]

Thank you! Thanks for watching the videos.

[@Carvino]

now you need to do a 212 head on 196!

[@freewillmonk9283]

Can’t wait for warmer weather where I’m from to get my mini bike back out😊

[@andrewkuhtz]

Black 66 awesome test! Thanks for sharing…surprised the 196 head did as good as it did! On a side note, have you heard about the duro max 274cc engine? I just picked one up, it will be interesting to see how it performs. Looks like it has a small block carb and a big block exhaust by looking at it so far. Also seems like it has a big block head on a small block.

[@Black66]

Thyanks! No, I havent heart of the 274cc. I'll have to check it out.

[@charlesstull4582]

Keep up the good work. I got a colmam ct 200u-ex. I changed the exhaust and carburetor then rejected the carburetor. Fun bike

[@rogerrose8220]

Be interesting to CC the chambers of each. Lotta work though. Well done video, Sir.

[@Black66]

Thanks!

[@spikemandan]

We all know everything works😂 it's just a question of how much power does it make and that's why I love this channel you seem to figure all this stuff out

[@mikeashbaugh7773]

Awesome you do these tests, I follow along, I have built 2 mini bikes and a go kart all with predators

[@jakedrew7365]

Good stuff. Thanks for the content.

[@spazzatv5813]

well, I have to try that out now. Keep up the great vids , They are always so entertaining.

[@NVScrapper]

That was a great video comparison. I can hardly wait to see what you're up to next! Keep making those great videos! 😀💯💯

[@johnk6346]

That is quick

[@michaelstarr5861]

Thanks for this! My RT200 head broke a valve guide and I have a perfect 212 head to put on.

[@valentingarcia6582]

I hate seeing your test runs. It brings out every bit of jelousy I didn't know I had. Stop killing me !!! I will follow you.

[@beerdiaryshootinmcdaniel8063]

my 196 also had .010 gasket

[@spazzatv5813]

They come stock like that.

[@Video17943]

Nice bike shop

[@majorgeneral5935]

Use a piece of 1/4 aluminum angle or 3/8 rod to align the chain / engine. On race karts they used to sell a tool that clamped to rear sprocket with a long rod that laid on chain. With these low power engines a couple of degrees engine rotation with reference to back sprocket or offset can rob a LOT of performance. I picked up several MPH on a race kart, I thought I was “eyeballing” it pretty accurately. Love your channel, great info and real data presented! I’m dying to build a predator vtwin drag mini for our run what ya brung 1/8 drag strip.

[@Spacecruizer203]

Good run boss 💯⚡⚡⚡⚡⚡⚡

[@shrugger1]

Interesting results.

[@juicebox65]

Why does this guy not have more subs. Great Content. Love the videos

[@Black66]

Thanks!!

[@juicebox65]

@Black66 no worries bro I've been watching for a while now I'm surprised A lot of people are not subscribing Like you got great content you do comparison videos experimental videos you explain things in good detail so people can follow along .

[@fuckingbasterds]

I like your minibike, with the small tires and high handlebars. You know, I had a predator 224 one time. Blew it up in less than a year. Pretty cool comparisons you're doing. I have a Coleman mini bike with an Amazon Bilt Hard 212 engine in it. Got a Vm22 carburetor kit installed today. I like your channel black66! I am a fan of small engine mechanics, though I am merely a novice. I have lots to learn from you and I hope to see more cool projects or comparisons! 😁

[@sammyhien9338]

I enjoy and learn a lot from your vids. Please try out hot coils like MSD, NGK ect.. thank you.

[@Black66]

Thanks! I did do a performance coil video. Check it out kzbin.info/www/bejne/gWmxkqOtosSUaq8

[@2jsCustomZ]

What about an Tilly 225r head🤔

[@cohocarl]

👍

[@WyFoster]

I think the small valve 196 head could have been playing to it's strength. That being the lighter valvetrain allowing a higher maximum rpm before valve float, and therefore more speed.

[@Black66]

Ya, that makes sense.

[@jbreezy228]

So this is basically the head off the Hisun engine right?

[@ajtheghostblood]

Yea

[@user-jd3du7bz4u]

It's the same head on the g160 but better port job from factory

[@2jsCustomZ]

Which push rods for this setup?🤔 the ghost or 196cc ???

[@Black66]

196

[@m3mobilealex341]

What performance can I get out of a 212 hemi on a budget? What flywheel rod and cam would you recommend that wouldn’t be super expensive but still good performance for the price?

[@landonwaters6028]

On amazon they sell a pvl flywheel for 40 bucks serious money for what it is the rod is gonna run you 70 and I recommend a +0.020 length can use a flat top and still not have to use a thick headgasket

[@GOKRTKRI]

What do you torque the head down to ?

[@johnathanholmes7297]

What jets do I need for ghost 212 carb that it comes with? Bc I bought some jets looking to fix the bogging on my top end but they didn’t fit 😢

[@dannymccullagh8211]

I used q 90 with header mine is a tilly

[@smsservicesall]

Try a genuine Honda engine see if it's better

[@Minibikeriegn]

Any more videos coming on the duromax ? Or is the duromax journey come to an end …🥲🥲

[@Black66]

Yes! I want to do more with the Duromax. That engine runs to good just to let it sit. 👍