Coleman BT200X: Off-Road Build + Performance Mods

Thanks for watching!!
SofTopper Playlist: • SofTopper
Truck Camper Playlist: • Truck Camp and Cook
Mini Bike Playlist: • Mini-Bikes
My amazon storefront: www.amazon.com...
FTC Disclaimer: Some links may be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you!
Links to items in the video:
Torque converter: amzn.to/3RSa5Ay
Torque Converter Riser Plate: amzn.to/3RSkI6s
BT200x Exhaust: amzn.to/46EuPRb
Billet Flywheel: amzn.to/45rhwlz
Rear rack for BT200x: amzn.to/3trLSqN
Hand Grips: amzn.to/45GzPn3
Foot pegs: amzn.to/46J9cyv
Phone holder and Saddle Bags: amzn.to/420YLn6
Extra Fuel Bottle: amzn.to/3OPZaGn
Waterproof canister: amzn.to/3WyHSzi
Cargo Net: amzn.to/3PTP7yQ
Air filter cylinder head cover: amzn.to/3QbIRDX
Nibbi Carb: amzn.to/3tpPGJ4
Nibbi Carb Throttle Cable: amzn.to/48KM8RR
Extra Long Chain: amzn.to/48KLWSD
60 Tooth Sprocket: amzn.to/3trMpch
Extra Belts for CVT: amzn.to/3ZQbBVQ
Heat Exhaust Wrap: amzn.to/3tuEN8Y
High Temp Silicone Coating: amzn.to/3ZP4Wv6
Extra Chain Tighteners: amzn.to/3PPmzGG
Spark Plugs: amzn.to/3LTiksg
Brake Handle: amzn.to/3LTiHmE
Light Harness: amzn.to/3rLNUl3
LED Headlights: amzn.to/3rPnkaH

[@SoggySleeves]

Love it! Those things are so much fun. I’m lucky you built two of them, and I get to reap the benefits!

[@TregsTravels]

I'd build out two more if I meant I could keep fishing with you!! Anything for you to let me tag along 😂

[@ol-man-duffyj688]

You ALMOST wheelie over every time taking off with that 224cc😂😂😂

[@TregsTravels]

Hahah I know! I need to do an updated video because I put a nibbi carb and a 60 tooth sprocket on there and now it can wheelie forever

[@aaronbowers3660]

Love it. I've got 2 of these bikes set up similar. I put the 60 tooth sprocket on the back that's been awesome for climbing. Next step for me is front brakes, gotta be able to stop on the other side of the hill once you climb it! Good content.

[@TregsTravels]

I just put a 60 tooth and a mikuni carb on the bike with the 224, it climbs everything now! How are you going to setup the front brake? We went for a pretty long ride up a steep mountain about a month ago, by the time we got back down the disc brake wasn't stopping anything lol

[@aaronbowers3660]

@TregsTravels GPS is supposed to have a kit pretty soon for it. Yeah, gets sketchy when the brake ain't doing it. Do you get any kind of engine braking from the torque converter, or does it just freewheel like with the clutch? I've still gotta clutch on mine.

[@TregsTravels]

sorry just seeing this! Yes, you definitely get a little engine braking from the torque converter. It definitely helps on the downhill slopes!@@aaronbowers3660

[@daleley7645]

Thanks for showing simple mods make a big difference.

[@TregsTravels]

Very simple! It was so much fun to work and modify them...now it's just as much fun to take them out and ride!

[@fatbuddycat]

The new Coleman is too low, long and heavy. The BT200X has a nice open design which makes working on them a breeze. Good point with the ground clearance.

[@TregsTravels]

I completely agree! The BT200X is my favorite model by far, especially if you're going to be modding them!

[@Apachefog]

My first bike is the bt200x and I got a megamoto 212 to be more of a workhorse and loaner bike while I build up the bt200x. The bt200x just handles and rides so much more confidently than the megamoto.

[@fatbuddycat]

@TregsTravels I've been through all the new big tire bikes including the Trailmaster. I made up my mind that if you need anything more than a bt200x, one should probably get a dirtbike.

[@fatbuddycat]

@quadriderkyle the mm212 has great brakes and a good neck but it comes at too many expenses elsewhere. Where the BT200X comes up short in brakes it makes up for in simplicity and ergonomics.

[@Apachefog]

@@fatbuddycat I was actually hoping to steal the front brake from the mm212 for my bt200x, but there is no way to make it work without cutting the necks off of both frames, which I considered briefly.

[@16driver16]

Its not the governor you feel at top end. Its the valve float if you did the zip tie right. 18lb valve springs will open up more rpm. Your ready for it with your flywheel already installed. Id call those stage 1 or 1.5 with the flywheel and stock camshaft, rod, valves, head, stock size carb etc.

[@TregsTravels]

That makes more sense! I'll upgrade the springs next. I appreciate it!!

[@Deucealive75]

Listen to the RPM when he's going 45 mph. That's nowhere near valve float RPM.

[@16driver16]

@Deucealive75 it absolutely is on worn out stock springs

[@Deucealive75]

@@16driver16 They must be very worn out to valve float below 4K RPM. And on an engine that new? You would need a pretty bad spring to float a valve at that RPM.

[@16driver16]

@Deucealive75 the hisun really is that bad... I scrapped mine and got a predator 212 and it's waay better in all ways

[@Deucealive75]

Nice. But the early belt shifts would drive me crazy. The sweet setup for off road Coleman 200's with a torque converter is a 60 tooth sprocket and a yellow spring for the driven in the tightest hole.

[@TregsTravels]

Thanks for the tip! I'll try this, changing out the sprocket is an easy change!

[@Deucealive75]

@@TregsTravels Welcome. The idea is to get higher RPM to take advantage of the power mods we add to these engines. The yellow spring is especially useful to get a later belt shift during full throttle acceleration. I found that the red spring in the tightest hole is not bad with my gearing. Look at some videos of guys adjusting or replacing the driven spring if you want to learn more. I really like 9/60 tooth gearing with a torque converter on my Coleman. It worked really well with a mild built 196. It's a little too much with the 224 because I have to be careful with the throttle and seating position. Another thing about the 60 tooth is that you shouldn't lose any top speed. You may gain a few mph.

[@jayhouston1614]

One thing i have learned in the one year after a partial governor bypass is that if you dont do all of that stage kit stuff the stock flywheel is more than fine! I use my coleman ct200u-ex as daily rider for store runs and stuff but i dont need to keep up with traffic. 25-26mph is more than enough for me! Good stuuf and info in this vid just not for me.

[@TregsTravels]

Totally! That's the fun part of customizing these bikes, you can make it just how you want it! Everyone has different goals and needs for their riding 👍

[@mjdelaney44]

what size of Nibbi carb would you recommend? I'm going to use it on the stock motor for awhile then I'd like to upgrade to the 224 or 212 ghost at some point and use it for that. Thanks! Love your videos.

[@TregsTravels]

I have the 24mm on my 224 and it works perfectly! The 22mm would work as well. Thank you for watching my videos! I appreciate the support 👊

[@PlayingWithFireOutdoors]

I'm doing a footpeg relocate, future plans include rerouted exhaust and front disc. But very similar results with my Predator 224

[@TregsTravels]

Let me know how the front disc works out! I'm very interested in that one, the drum brake sucks

[@hershfam]

Picked up a CT100U “used” basically brand new which I’m only going to use it for getting around the property so I might get a bigger predator to throw on it especially after watching your video lol

[@TregsTravels]

Oh heck yeah! Time to mod that bad boy up!

[@Tp-vv7vi]

Looks very fun, i want one now.

[@TregsTravels]

I highly recommend it! It's impossible to ride these things without a smile on your face...we've been riding them into the back country to go fishing and it's been a blast!!

[@mikeh.753]

45 mph is really moving for a mini bike. I'm going to get me one of these in November.

[@TregsTravels]

Yeah it definitely feels fast on these little guys 😂 awesome! What model are you going to get?

[@mikeh.753]

@@TregsTravels I'm not sure what model I want.

[@joeychito]

Imagine if the black & red bike didn't have the exhaust exit right by the air intake.

[@Knuckledragnation]

Yes you nailed it as this totally reminded me of a yellow Tote-Gote I owned back in the early 1980’s as a kid. Although I’d be lucky if I got the thing to go anywhere north of maybe 10mph. All torque no speed beast! Walmart has a Coleman BT200X-G 196 cc for $750! Also with the understanding that terrain & payload will dictate how far one can travel on maybe a gallon of gas how far ya think you can go and back on one of these? With that said have you considered upgrading to a larger fuel tank? ✌🏽

[@TregsTravels]

Yeah! I love the classic tote goats. I was trying to capture that feeling of those older gotes with a few modern touches. I've been actually surprised at how good these things have done on full mileage. We've gone for all day rides and the tank was barely halfway empty by the time we got back. I always carry that 750ml fuel bottle under the rear fender so I've never worried about running out of gas!

[@Knuckledragnation]

@@TregsTravels You’ve kickstarted (pardon the pun) my brain in a different direction totally then where I was at when my wife mentioned she wanted a motorcycle. I own a couple of H-D motorcycles, but since my wife is only 4’10” & has never ridden, I’ve been very limited on what to possibly get her. Plus the fact that’s she’s already crashed her E-Bike into a barbed wire fence the first day she rode it I worry about her on a busy street or freeway. Heck I worry about the public as well! 😳🥴😜✌🏽 Motorcycles like these check off many boxes. Inexpensive in relation to others & simple to operate/maintain. Not to mention if she does go down she’s less likely to injure herself to bad. I know each state is different but without getting to far in the weeds on certain laws, etc…. do you ever get any pushback from camp hosts, rangers or LEO’s regarding this motor bike anywhere you’ve ridden? Again thanks for sharing this and for your insight. ✌🏽

[@fatbuddycat]

Heck yeah! Team BT200X rules!

[@TregsTravels]

I agree!!

[@PhatGuy420]

I bought the same style helmet for the same reason.

[@TregsTravels]

Everyone that sees it recognizes right away lol

[@ktownc936]

Tregs, the biltwell grips are amazing on the minibike so thanks for that. How did you secure the milk crate to the rack ? Cheer brother, I've watched this video over 20 times 😂

[@TregsTravels]

Haha I love it! Glad it's been helpful 👍🏻 I just used some zip ties at the bottom of the crate and they've held up well!

[@roypatterson9910]

I have a Coleman CT200U-EX and I have a Tillotson 225cc Performance on mine that I bought from GoPowerSports, which has 18.686 hp and it isn't rattling all over the place. it depends on how good the engine is built, how balanced it is.

[@roypatterson9910]

I forgot to add that I have a Mikuni 24mm flat side carburetor and a Torq-A-Verter

[@TregsTravels]

You're 100% correct! I think tillotson is a better motor for sure. The predator 224 has great power but runs hard.

[@seasons-psd]

Just got one of these bikes yesterday. Im as new as it gets to anything bike/mechanics goes. Im wondering what tools do you keep in the saddle bags as far as sizes/use. I want to take it out camping and if I could get a heads up on common issues that need repair I would greatly appreciate it!

[@TregsTravels]

Awesome! Congrats on the new bike! The good thing is most of the repairs on these bikes are really simple 👍🏼 I keep the wrench kit that came with the bike in there, I think that's metric sizes 8-18 if I'm not mistaken. Then a Phillips head screwdriver. Zip ties are always good to have! Lately I've learned to keep a few extra key bolts and nuts in there...I have used loctite on most everything but occasionally something will rattle off. Electrical tape and a set up pliers too. I think that's most of what I carry!

[@seasons-psd]

@@TregsTravels Thank you so much! That is really helpful. Been a blast so far and can’t wait to keep learning/modding it

[@bunjininja]

I have owned this bike for years. Repairs have been pretty minor and minimal. 2 master links. One to the jack shaft and crank. The other to the sprocket. The gas cap is picky. Watch out or you'll lose it going down the road. My chain tensor on the jack shaft came loose. But I caught it in time. I do ride mine hard. Pop wheelies. Skid. Donuts. So on. The tires are very soft. They won't last on pavement for long. It's made for off road. My brothers have these bikes as well. One, his exhaust broke completely off. And the other. Myself included. Have had a few sticks jammed up in the chain and sprocket. Forcing the rear tire to a skid. Bending the chain and sprocket on a couple occasions. Other than that. Zip ties for the brake. It starts every time. It's been very reliable. We tend to ride hard. So our issues might not be the same as yours.

[@Buses2Bikes]

Keep the minibike content coming. The BT200x is an awesome bike. Thanks for sharing the adventures.

[@TregsTravels]

Thank you! They're too much fun to not share...we've got some fun back country trips planned so stay tuned. Thanks for the support!

[@DavesCampingAdventures]

that looks like a lot of fun!

[@TregsTravels]

They're a blast! Highly recommend them!

[@Tyler-xh2sg]

1 turns into 2, so true

[@TregsTravels]

For awhile it turned into 4 haha...I'm back to 3 right now but there will be more lol

[@slugmtb]

Awesome dude. We love our Coleman’s. I do have a question on registration. I see that you are in Utah and I have just got the run around calling to get info on registration. What did you do to get them registered? I bought mine used so Coleman will not give me a point of origin for them.

[@TregsTravels]

It's definitely a run around! I bought one used on Facebook that didn't have a title either. I had to go to the DMV and submit a form with pictures of the bike for a "lost title" that process took about 90 days then they issued me a title and I was able to get it registered as an OHV. A pain for sure! New bikes bought from Coleman are a lot easier to register I've learned. If you take them up to Idaho you can just buy an out of state OHV sticker without a title. Let me know if you have more questions!!

[@slugmtb]

Thank you for the information. I will have to go that route. Hopefully we can get them done. Thank you!

[@troyashe6164]

Out the box they go 20? Mine went 38 first rip

[@TregsTravels]

Do you have one of the new ones with the torque converter? From the factory with the governor they advertise 20mph max speed

[@Platano_macho]

I slapped a 6.5 hp Briggs and Stratton vanguard engine on mine and I was able to top out at 55 mph stock it’s a lot smoother and quieter

[@TregsTravels]

I was thinking about putting one of those on the orange bike! I like that idea a lot. Thank you for sharing!

[@Platano_macho]

@@TregsTravels I love it but I don’t have a channel to share if you do please make a video man also in that van guard engine I use 5w30 Briggs and Stratton synthetic engine oil and it does help with longevity

[@TerraMagnus]

I bet it would be stupid easy to use the milk crate as a mounting point for rotopax fuel/water cans. ADV Minibike 😂

[@TregsTravels]

That's a great idea! I'm gonna do that on my next build!

[@teshuvahemmet3036]

Nice job 👍

[@TregsTravels]

Thank you so much!

[@mkclips1967]

i have the same bt200x coleman and i was wondering where did you get that phone holder i love it and would like to get one myself?

[@TregsTravels]

I got it off Amazon! The links to the all products are in the video description or there's a link to my Amazon store in my bio!

[@mkclips1967]

@@TregsTravels thank you

[@thumperbangin2000]

Have one and love it

[@TregsTravels]

Good! They're honestly so much fun. Everyone that rides them loves them!

[@thumperbangin2000]

@@TregsTravels hoping to do torque converter on mine here soon

[@TregsTravels]

@@thumperbangin2000 I definitely would start with that. That was a game changer for the bikes. My brother just bought 2 bikes, we're thinking about making some build videos as we start to modify them

[@thumperbangin2000]

@@TregsTravels im researching it. My bikes engine is stock minus throttle stop delete, zip tie mod, and an exhaust..

[@TregsTravels]

@@thumperbangin2000 you'll notice a huge difference with the torque converter then with the mods you've already done. I highly recommend getting the riser plate from OMB warehouse when you install it 👍🏼

[@mudsweatandbeersmsb383]

What gas bottle do you recommend for extra gas?

[@TregsTravels]

amzn.to/4asrG7U A 750 ml bottle has been perfect for me, check out that link!

[@davidpearson8043]

Do you have a link for those tires?

[@TregsTravels]

Here's the tires! Looks like there's a 5% coupon on there today so make sure you apply that! amzn.to/3Gh8kG4

[@davidpearson8043]

Thanks!!!

[@sawyerhaaland1547]

I blew up my engine after putting on the mods any tips?

[@TregsTravels]

Dang! Was that on the 196cc? Do you know what's broken or is it all the internals...you can try to replace what's damaged or just pick up a predator motor. The 212 ghost is already setup for higher RPM's

[@jacobkindsvatter4055]

Where do i even buy one of these

[@TregsTravels]

There's a few options on Amazon! amzn.to/3VxQYNz Otherwise you can find them at camping world, tractor supply, CAL Ranch

[@masona1429]

Can you do a tutorial on how to do the zip tie method on the governor? I’ve been trying to see how to do it properly on my warrior 200

[@TregsTravels]

Have you watched this video? This is exactly how I did it...let me know if you still have questions and I can film a short video 👍 kzbin.info/www/bejne/d3ebqayLbN6Di80si=eX_em5_S-KfaYe97

[@masona1429]

Appreciate it

[@NewEdge2v]

Registration? So do u have these able to be rode on streets?

[@TregsTravels]

No they're not street legal...in Utah and Idaho I have to have them registered as OHV (off-highway vehicles) to be able to ride trails. I can ride them on county roads too just not in town.

[@NewEdge2v]

Oh that’s what I figured. There are people who have gotten there’s street legal.

[@Jdp417]

I’m in Utah and I have the same bike, how did you go about registering it? I can’t seem to figure it out

[@TregsTravels]

It was definitely a pain! I had to write coleman and show proof of purchase then they sent me the title. Then I had to take the title and the sales receipt to the DMV to get it registered as an OHV. I would reach out to coleman here: www.colemanpowersportsusa.com/contact and ask them to send you the title@@Jdp417

[@gustavogarcia1244]

How much you pay if you don’t mind me asking

[@ktownc936]

Where can i get this helmet? thats amazing!!!!!😂 I threw a bell on mine and can help say i can get 70 miles to the gallon on thus hog. Need the helmet to complete the rest !

[@TregsTravels]

Hahah yes! I need to add a bell! I can't find the exact helmet I bought but here's the closest thing I could find: amzn.to/3xIPcAa

[@ktownc936]

@@TregsTravels thanks for the helmet, the grips you bought only came as a single grip? So you had to buy a 7/8ths and 1 inch grip separately? Or did they come as a pack ?

[@TregsTravels]

@@ktownc936they came as a pack. It was a little tight getting it over the plastic throttle but I got it on there 👍

[@ktownc936]

@@TregsTravels were they both 7/8ths? I think they sell a 1 inch for the throttle. So they were the same size, cheers for answering my annoying questions. I subscribed

[@nickhodgson5219]

What jetting are you running on your nibbi? I got a nibbi 22mm with for my 196cc.

[@TregsTravels]

I have the #35 pilot jet and the #102 main jet and it's running like a champ! I typically ride at 5000-7000 ft elevation.

[@michaelengelhart1514]

Great video. What is the song at that you used at the end?

[@TregsTravels]

"The Colonel" by Zachariah Hickman 👍🏻

[@thoughtlessroamer]

Any suggestions for the regular stock model, the 200U? Looking to upgrade it, or just sell it and get a different bike. Not sure which though

[@TregsTravels]

The 200u is a great bike! You can purchase the front forks with suspension...that would be the best upgrade you could start with to smooth out your ride! Then start with a torque converter for the motor and building that out 👍

[@thoughtlessroamer]

@@TregsTravels awesome, thanks

[@davidpearson8043]

Awesome video, and very helpful. Do you have a link for the helmet?

[@TregsTravels]

Thank you!! I couldn't find the Core brand helmet that I have but this one looks close! amzn.to/3MkQqWq

[@davidpearson8043]

Close enough, thank you!

[@bearpawgaming9502]

Yo you should buy a straight pipe for it

[@TregsTravels]

My buddy has one and it sounds amazing! My neighbors would love me 😂

[@bluescluez3354]

my back kills me after an hour of hittin little bumps like my ribs are hitting themselfs on bumps need rear suspension

[@TregsTravels]

Yeah I've seen some guys add springs under the seat to help a little bit. Honestly, since I put the wider foot pegs on there I'm able to stand up a little bit over rough bumps and it's a lot more comfortable

[@jtbassgambler2594]

What kind of knobby tires are they and sizes ?

[@TregsTravels]

They're 19x7x8. I got them on gopowersports but they're sold out there...this is the same tire on Amazon 👍🏼 amzn.to/3D7QfsF

[@jtbassgambler2594]

@@TregsTravels thank u appreciated soo much

[@TregsTravels]

@@jtbassgambler2594 no problem! They're a beast of a tire!

[@keltingr2612]

I got mine CT200U-EX for $150 after a 260lb fat kid broke the frame

[@TregsTravels]

😂 that's a steal! Hopefully it was a simple weld!

[@paulinegaton0218]

Can I have free? ❤❤❤

[@TregsTravels]

I wish I could give them out to everyone!!

[@paulinegaton0218]

@@TregsTravels 🥺🥺😍😍

[@mikedesilets3324]

Love the helmet. 😂 Thanks for the review.

[@TregsTravels]

Lol it just seemed right. It's all or nothing with the mini bike gang!

[@MattyveesPlaylist]

I've got pretty much the same mods for mine. I added mud flaps to the rear of both fenders that SIGNIFIGANTLLY helps with mud, water and dew off grass. i got an 212 with a starter, mounted an ammo can to the side for tools and the M12 battery that runs the starter..and of course neon underglow!

[@TregsTravels]

The mud flaps are a brilliant idea! That's a sick build 💪

[@josue5852]

got a baja carbon ive been working on, shes getting a predator 224 with 15.5:1 compression and e85. that all said im gonna push the charging flywheel on it as ive had governor deleted engines work fine even after years of running them hard. itll be rev limited to 6k to prevent issues and in case its getting the heavy duty housing. I've got a similar setup on a manco dingo and itll hit 57mph however that thing is terrifying at that speed, and to think im building this motor to be even meaner

[@TregsTravels]

That build sounds like a beast! let me know what you get for top speed on the new one! 45mph on the trails is perfect

[@korbin____4419]

do those gas canisters ever give you a little spray when you go to open them

[@TregsTravels]

I haven't had an issue with that. I only fill them to the fill line which is about 3/4 full

[@jaredcharlesj]

Just got a Coleman Bt200x. Thank you so much for sharing your beautiful build with us and including every single link

[@TregsTravels]

Heck yeah! Congrats! I hope it helped!

[@jonoxthomascito6516]

You can register these to be road legal ?

[@BrahTonne]

It's my golf cart for getting around my property. I leave mine stock and believe in grease so been with me years. Want a better and smoother take off? use some oil in centrifugal clutch. will slip at first but you will see ( you will like) and again been doing this for years. I run the crap out it almost every day. I don't put a basket on back so when riding hard for fun I can separate in a wipeout lol. I have basket on the front where headlight was. By the way I am 200 LBS. Yea I'm a fatass with chicken legs. I have replaced the jackshaft sprocket because even oil couldn't save that cheap made thing and upgraded. nothing special. OIL and GREASE! the wheel bearings etc doesn't come with a good grease packing so make sure you get grease in those . Get grease in all bearings. The plastic cover over the bearings pops out and back in easily. Mine is the CT200 and wrecked many times. Its tough. The muffler sticking out would end up being ripped off mine so again stayed stock.

[@TregsTravels]

That's awesome! Thanks for the tips, I will definitely grease em up! Sounds like yours is holding up well!

[@larryvelasquez662]

Heard Coleman went bankrupt. Having a hard time finding parts.

[@TregsTravels]

Oh man I hadn't heard that...I'll have to look into it!

[@tanner3322]

After market parts for colemans have been used for years. Coming out of China mostly. I don't think them going bankrupt would have bothered the part market?

[@bradleyj.fortner2203]

Top speed is great if you're racing. But, If you're riding off-road or even in traffic, acceleration is way more fun.

[@TregsTravels]

I agree 100%! I'm really happy where I'm at with these, they're a blast

[@Bigpimpin9393]

Got mine to do 63mph with the 224 governor off stage 3 kit

[@TregsTravels]

Nice! Sounds like I need to do some more work!

[@Veluisep]

You're such a baller for showing the speeds and fly by vids. Definitely going to start modding mine

[@mikesbarn1858]

I suggest adding a springer seat for comfort. I put one on my CT200UEX. Made a huge difference.

[@TregsTravels]

I love this idea, I'll look into it! The lower back is always sore after a ride 😂

[@yonnj]

Curious as to why you didn't remove the governor when you replacer the flywheel on the stock 196?

[@TregsTravels]

I wasn't too worried about top speed. I mainly trail ride and these things are perfect for that! I actually just put a nibbi carb on there so I bypassed the governor completely

[@kluper1157]

What is the set up on the 196 Colman? Love to make mine a 45 mph machine? thanks

[@TregsTravels]

Torque converter, non-epa carb, billet flywheel, exhaust, governor bypass 👍 not too bad to get to 45mph! I'm going to do a build series on my brother's bikes so stay tuned!

[@josephr.8344]

Did you have to remove the emissions box to get the torque converter to fit? Also, did you use the same bolts that came with the torque converter kit? Thanks

[@TregsTravels]

Yes on the predator 224cc you have to remove the emissions box, basically just cut the wires and remove it. You need different bolts for the predator because it is standard sizing instead of metric. You need 5/16-24 to mount everything for the TC. OMBwarehouse sales a predator TC mounting bolt set if that's easier!

[@josephr.8344]

@@TregsTravels perfect! Thanks so much🙏🏼

[@yoboo8225]

I can’t find anywhere to buy that model of bike

[@TregsTravels]

I see them in stock from Walmart.com, try this! www.walmart.com/ip/Coleman-BT200X-G-196CC-Gas-Powered-Green-Mini-Bike/349775511?wmlspartner=wlpa&selectedSellerId=0&adid=22222222228349775511_14069003552_202077872&wl0=&wl1=g&wl2=m&wl3=42423897272&wl4=aud-2225087348587:pla-295289030566&wl5=9029787&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=349775511&veh=sem&gad_source=1&gbraid=0AAAAADmfBIqnLjHer6xpvGZu3AzcK4Jda&gclid=Cj0KCQjwlN6wBhCcARIsAKZvD5gFgke_OBPvKvQNirBHYZIUGVVgPxJ41oubOmDz_J8z4zY69xb2dJEaAv0oEALw_wcB

[@jamestorline3965]

How did you do the 2 zip tie cheat for gov.

[@TregsTravels]

I basically did it like this: kzbin.info/www/bejne/d3ebqayLbN6Di80 but I stuck 2 zip ties in there, each going a different direction and attached them to each other