Coleman Mini Bike Update! | Nibbi Carb and 60 Tooth Sprocket

[@N.Hodgson]

More mini bike videos!

[@TregsTravels]

Of course! I'm working on editing a few right now!

[@ralphsrides]

It is interesting, the amount of attention I get on my mini bikes… the usual response is “can those even handle the trails?” - yeah, they can. People seem to love seeing them though. I’ve got 250cc 4-stroke dirtbikes, I’ve got an ATV, a handful of minis. The fun factor on the mini bikes is really hard to beat. They go every bit as fast as you want to go on a trail, they’re easy to catch air on whooped out sections, and they handle deep sand trails like a boss. If you’re looking for a cheap way to get out on the trails with a nice simple bike to maintain, mini bikes are awesome. If you want more technical riding on rough endure trails, probably look at a good trail specific dirtbike.

[@TregsTravels]

I agree 100%! The funny looks turn into inquisitive ones once they see us rip down the trails haha. I love getting the bikes into alpine lakes for some fun fishing adventures. What's your favorite mini bike model?

[@ralphsrides]

@@TregsTravels I have an old unknown model, and a couple of Colemans (CT200U, 200U-EX)… buddy has the new RB200… I honestly like the Trailmaster Hurricane the best. I would trade a couple of mine for one of those, because it has all the extras you want for the trails and hard riding. That being said, my EX is pretty awesome to rip down the trails with.

[@josephr.8344]

Thanks for the info! I'm a beginner with mechanic stuff and the links to the parts make everything much easier

[@TregsTravels]

No problem!! I don't have a background in mechanics at all. I learned little by little by trial and error. So have fun with it!

[@natesandralesueur1424]

Looks like a blast!

[@TregsTravels]

Man they're a blast! I always have an extra bike if you ever want to get out for a ride!

[@DavesCampingAdventures]

sweet! you did a lot of work on the bike, looks really good buddy.

[@TregsTravels]

Thank you! A lot of hours put into the garage but it was so fun!

[@DrAdamHotchkiss]

Another great video

[@TregsTravels]

Thanks my man!

[@jayfry905]

I buckled a hunting Fanny pack on the front of my bike I get lots of extra storage

[@TregsTravels]

That's a great idea! Any extra storage comes in handy

[@johnnyc.3261]

Love it, I need to get that converter for mine. Also my grandma wants your glasses, where did you get them?

[@TregsTravels]

😂😂 glasses are from blenders. Good to know that me and your grandma have the same taste 😂

[@aaronbowers3660]

Cool vid, love your positivity. I've gotten teased about my BT200X's too, until they ride em like you said!

[@TregsTravels]

If it makes you happy then who cares what anyone else thinks! As long as it's not harming anyone else lol

[@crazyhorseracing6130]

Do you have a link for the spacer that goes between the carb and motor?? Thanks for the videos!!

[@TregsTravels]

This should be the one right here!: amzn.to/3ZRCedl Appreciate it!!

[@crazyhorseracing6130]

@@TregsTravels Thanks!

[@mrgoats]

60 tooth gives you torque in exchange for top end. When ever changing gearing, That's the balance you are trading.

[@TregsTravels]

💯 -I love that extra torque out on the trails! These things are beasts now

[@williamsantiago7303]

Great video, sir. That new motor you installed, does it vibrate like the factory motor that came with the bike? I still have my factory motor, and it vibrates really badly at top speed that it makes my hands itch and hurt. Thumbs up on your video buddy. 👍

[@TregsTravels]

I put a rubber mat under the motor mount and that helped a lot with the vibration! Also, make sure all the bolts on the front fork and handlebars are super tight and that will help with the vibration 👍 glad you liked it!

[@williamsantiago7303]

​@TregsTravels Hey, thank you for the info and the reply buddy. I will try the rubber mat, that sounds promising. 👍

[@HenryRs]

Subscribed This nibbi carb, fit the bt200x stock 196cc engine?

[@HenryRs]

Or which you recommend ?

[@TregsTravels]

Yes it'll fit the stock hisun motor!

[@redogman67]

Sweet bike! It looks like you have a rubber pad between the riser plate and the frame, did this make a difference with vibrations to make it worth doing, and what did you use?

[@TregsTravels]

You're right! I actually think it has helped a lot with the vibrations. I also like it because mud and water don't get under my riser plate either. I found these at Home Depot. They sell them in packs but I went into the store and they had some loose ones laying around that they sold me 👍 www.homedepot.com/p/Survivor-SportFloor-Eco-Lock-Isometric-Grey-24-in-x-24-in-x-0-3-in-Rubber-Gym-Weight-Room-Flooring-Tiles-25-7-sq-ft-6-Pack-01040805082/314975531

[@ktownc936]

How did you secure the milk crate to the rear and rack ?

[@TregsTravels]

I just used some heavy duty zip ties and they've held up well

[@HenryRs]

The 60t sprocket gives you more speed or torque?

[@TregsTravels]

More torque 👌

[@anthonystone266]

What tires do you have on there?

[@TregsTravels]

These ones right here! Love em: amzn.to/3VBn2Py

[@Deucealive75]

That's the best basic setup for any Coleman 200. Slide carb, header pipe and silencer, CVT, and 60 tooth. There's no need to build the engine.

[@TregsTravels]

I agree! We run these things all over and they run awesome!

[@stefanagiovlasitis2669]

Does that motor mount plate you have listed line up with the factory bt200x motor?

[@TregsTravels]

Yep! I used that same mount for the 196cc that comes on the bt200x 👍🏻

[@Buses2Bikes]

I may have missed it if you mentioned it in this vid but for the NIBBI Carb, did you oil the air filter or leave it dry and put the sock over it? I put a Ghost 212 on my BT200X and a "Chicuni" and after jerking around with that thing for weeks, I still can't get it to run. I've lined up the carb to the intake manifold and did all the stuff everyone says you're supposed to do to get the carb to run but it's refusing to do it. I'm starting to think I either didn't prep the air cleaner correctly or I should just ditch the Carb and try the Nibbi out.

[@TregsTravels]

I just ran it dry, there honestly wasn't a lot of prep to it. We threw it on there and it fired right up! I've done some really long rides with it and it's ran amazing. My buddy bought one of those fake mikuni's and never could get it to run...try out the nibbi, I don't think you'll be disappointed. Let me know how that ghost is running, I'm interested in putting one on my other bike. Good luck!

[@Deucealive75]

Buses... Was wondering if you ever got your engine going? Did you ever think that your Chikuni was just a bad one? Did you verify that it runs with the stock ghost carb? Here and there I keep hearing that these Chikuni's are junk, but at the same time others don't have any problems. One youtuber "Dirty 77" said that he's never going to buy a Mikuni again because the Chikuni's work so well. I can believe it because he knows what he's doing. I run bored stock carbs and have plenty of power in my RPM range. But I'd like to get a Chikuni just to see how difficult or not they really are.

[@Buses2Bikes]

@@Deucealive75 I swapped the Chikuni for the PZZ22 that came with the Ghost and it ran for about 23 seconds. I have to change the oil as the Chikuni dumped gas in to the crank case. It's a labor of love that I'll get to as time allows. I have a Nibbi and it's needed attachments in my Amazon list waiting if needed.

[@Storm65w]

Hey man just bought all those parts and gonna install them soon on my 224 engine. When you put the nibbi carb on did you have to remove the governor inside the engine or just the linkage on the outside?

[@TregsTravels]

You can put the Nibbi carb on with just the linkage bypass, I've been running mine that way just fine 👌

[@BIKELIFEGamerJB215]

You will blow your motor eventually open side cover and take plastic governor gear out you will tell a difference night and day

[@Deucealive75]

@@BIKELIFEGamerJB215 He's running a slide carb. The internal governor does nothing but spin. He not turning enough RPM to break it. If he opened the engine and removed it there would be no change in engine performance.

[@N.Hodgson]

What throttle tube/assembly are you using to be compatible with the nibbi cable.. mines got to much forward play without a stop

[@TregsTravels]

I just used the stock setup, I had to adjust it a little bit but there's no forward play. I just used the nut on the throttle tube and that was enough to tighten it

[@jennifercorbridge5698]

Hi my Tedders! 💛

[@TregsTravels]

Special appearance by the one and only

[@loopis12321]

Who was the guy in the white shirt? Looks like he was born to Minibike

[@TregsTravels]

That's the tote gote GOAT!

[@veedubgenetics6811]

What nibbi carb do you recommend for an rb200 looking to upgrade the stock one I have

[@TregsTravels]

Congrats on the rb200! How do you like it? I have the 24mm on mine and it's perfect, here's the link amzn.to/3seLYlr you'll want the intake manifold too amzn.to/40v7YVW

[@veedubgenetics6811]

@TregsTravels appreciate that love this thing did some upgrades to the headlights and added external power supply with milwaukee batteries. Got those parts added to the cart. Did you go tithe the nibbi cable too I have a 48" one in the cart was wondering it that was the length you got. Your bikes got me wanting to tinker with this thang again so big thanks

[@TregsTravels]

@@veedubgenetics6811that sounds sweet! Honestly it's just as fun to tinker as it is to ride! This is the cable I used: amzn.to/466mbcV

[@veedubgenetics6811]

@@TregsTravels you are the man! Thank you.

[@richarddevaottien7724]

The money you saved on rear suspension can be spent on your future spine surgery😮

[@TregsTravels]

Haha you're definitely not wrong...I honestly slightly stand up on the pegs when I'm going over rocky terrain so it doesn't hit me too hard. The new Coleman's with rear suspension are very appealing!