Coleman ct200u clutch oiling

Oiling the clutch

[@deewhyy7012]

Sounds like a beast. Thanks for the advice

[@Afterburner]

Hey thanks for this video - I just got my CT200u and was wondering about this - 20-50 weight oil - Appreciate this tip! I have been doing videos on mine and will definitely point folks to this video... Just subscribed and many thanks!

[@brandonphillips4042]

god how fast did you run to the walmart?

[@gregsteele9002]

Nice build! I got a Mega Moto 200 clone for 500 because I gotta have muh front shocks.

[@healthnut3165]

Thanks for the infi

[@geneo3654]

Sounds like a little Harley !!! Awesome !!!

[@jtperez657]

Got a link to that after market kit?

[@GluteusMax777]

Did you install 18# valve springs on your scooter?

[@williamhouze3019]

Can you please share the links for the header and stage 1 kit please?

[@dcd6115]

I'd like to see this too. I like how the exhaust pipe is run through the middle of the bike out the back. The GoPowerSports header has it running out the side where you can easily burn your leg. I hate that design. This one looks much better. It would be helpful if you could share a link.

[@marioman2471]

I just bought one and it’s wanting to go as soon as I start it, any fix for this?

[@roeb3872]

You have to adjust the throttle line.

[@arberfilms5998]

If you use synthetic engine oil on the clutch you almost never need to re lube the clutch all the time.

[@aminosaur8079]

I was about to ask if I could do that. I have to do an oil change on it anyway. Could I use 10w-30 oil to lube the chain?

[@zhoadam]

What is the gray cap to the left if where you added the oil for ?

[@armandogonzalez6822]

Adam Anderson where you put the engine oil

[@jacobsebastien3910]

He put it on the bushing, but he is supposed to do it when the clutch is Warm/Hot so the oil gets sucked into bushing.

[@prostreetgsxr]

@@jacobsebastien3910 finally somebody that knows what’s going on

[@drewhenry5491]

Whats up with this dudes breathing?...

[@user-wf7yk3bc7j]

Can you just spray lubricant in between the holes to the shaft?

[@yeseniagarcia5095]

wat kind off oil did u put on it

[@jimf-150]

Regular engine oil

[@jacobsebastien3910]

You have to oil it while clutch is warm/hot for it to suck in bushing.

[@bigbeartanner]

What do you mean

[@gregsteele9002]

Do you mean let it run for a minute so the metal expands, ( then shut it off) like when soldering copper plumbing pipe? Makes sense. It will draw oil into the sleeve farther

[@saulgoodman3409]

What kind of oil?

[@jacobsebastien3910]

Regular motor oil works best

[@kevinmontoya7318]

When I start mine and I lift the back it starts rolling does that mean the clutch is not oiled because I used it for 8 hours straight through dirt and im wondering if the oil is gone

[@conner5611]

No thats normal

[@robspear03]

Its either in need of a bit of oil or your idle is too high.

[@jacobsebastien3910]

That's not normal' means clutch is about gone because lack of oil. It needs to be oiled while warm/hot for the bushing to suck up oil. An oil EVERY ride."

[@bigbeartanner]

Jacob Sebastien how do you get it warm/hot

[@jimf-150]

@@bigbeartanner by running it first and then oiling it

[@bigbeartanner]

Will this fix my bike it just goes when I start it up

[@reviewbruh3382]

No this won't fix it! your bike needs a new clutch