Post in the comments any questions you have on anything mini bike/gokart related
Пікірлер: 63
@davek26904 жыл бұрын
Why wouldn't you show how to oil it instead of telling us
@LandausProblem7 жыл бұрын
Thanks for the video. My go-kart was making a horrible noise and I narrowed it down to my clutch. Oiled the clutch as described and works great now. I never had to oil my centrifugal clutch 35 years ago. May look at upgrading to a better clutch when this one wears out. Thanks again.
@beaubrummelmotorizedbicycles2 жыл бұрын
Here's a old school mini bike tip, we used back in the day. If you are out riding and your clutch starts squealing and needing oil. Pull your dip stick out of engine and allow a drop or two, to oil the bushing at the circlip. The video says if you have a Hilliard to grease it, well that's not entirely correct, most Hilliards have a "oilite" bushing that needs oil not grease. If you grease a oilite bushing you render it useless. The Hilliards that do need grease are the one's with a "needle bearing bushing" such as the Inferno Fury. Also some Hilliards have been modified with a "zerk" fitting to make it a greaseable clutch. Do some reading about Hilliards and Max Totque and Chinese clone clutches and you'll have a genuine understanding of how to maintain it.
@dunamon2 жыл бұрын
just changed my baja clutch, When taking off it was slow to respond, put oil on that spot you pointed out,,Wow! what a difference. Glad I found your video,
@joejava30005 жыл бұрын
Good tips thanks for sharing your tips they really have helped me out!. Keep up the good work and thank you for making this video and for everyone else who has shared your really good tips to especially on what type of grease or oil to use.
@wille.m95853 жыл бұрын
Oil it every half hour to an hour and you want to do it after your ride because the clutch has been warmed up and it will absorb the oil a hell of a lot better if you do it before you ride just a drop or two because the centrifical force will fling It Off if it does not have a chance to absorb that's why it's best to do it when it's warmed up
@prostreetgsxr Жыл бұрын
Supposed to oil your clutch after you ride so that way the clutch pushing his heart and it was soak in
@smittysmith61737 жыл бұрын
I lube my clutch with high temp bearing grease. Works great on my CT200U.
@hksavage63107 жыл бұрын
Smitty Smith I got rid of the cheep clutch and went with a noram ge clutch with a bearing instead of a bushing
@hksavage63107 жыл бұрын
Smitty Smith grease is the way to go
@smittysmith61737 жыл бұрын
Thanks man, I'm going to look into one right now. Thanks again. Also subbing to your channel.
@smittysmith61737 жыл бұрын
Done.
@adam_-adam4 жыл бұрын
Hi i have a question, just wondering if you or anyone else has an opinion on oiling the inside of the clutch just a little bit, like a few drops". Ive had a jerking problem on acceleration, ive everything fine so far as chain tension and allignment is perfect but i noticed putting a few drops on the actual clutch pads smoothed everything out tremendously, now it has a super smooth take off and stays that way for up to 2 hrs of ride time give or take. It still has plenty of power after about a minute or so once some of the excess oil flys off, can still do hills very good but most of all its supper comfortable and smooth, so i heard the pads will heat up by doing this, but does has anyone actuall knowledge of a clutch going bad this way? Im gonna keep doing it as an experiment i guess just to see how long i can get away with this, i hate that jerkyness and am kinda thinking all centrifical clutches have this problem cuz everything is perfect on my drive chain, has to be clutch. Im using a hillier extreme duty clutch.
@beaubrummelmotorizedbicycles2 жыл бұрын
Why you are experiencing the jerking upon take off is a gearing issue, the few drops of oil you used allowed the clutch to slip a little allowing the take off to not be so aggressive. Check into what gear ratio you are using, you don't say if you are running a jack shaft or not, or just back to a rear gear from your clutch. Excessive oiling the shoes will probably make them overheat a little causing premature wear, but if it works for you, it works. Check your gearing....
@kobeb24135 жыл бұрын
So I just made a mini bike, and i pretty sure the alignment with the sprocket and clutch are good. When I run with the bike the chain stays on. But when I turn the engine on and give it some gas the chain falls off. Before, I looked back at the sprocket and the chain was bouncing up and down before falling off. Is the chain too loose? Or is there a sprocket problem?
@youngbuck44405 жыл бұрын
You need a chain tenchener
@robspear035 жыл бұрын
Torque flex. Gusset or girdle the engine mounting plate. Too much torque will kick a chain from flexing the engine plate.
@ericstoddard30373 жыл бұрын
I going to get a beer and think about it
@ericstoddard30373 жыл бұрын
I have had a few beers since then and I think that I need some more
@mrspud88693 жыл бұрын
@@ericstoddard3037 🤣
@richardmichaels2742 жыл бұрын
What are you using to oil it? Do you have a link?
@77ARATH3 жыл бұрын
Did you installed it with the chain in the inside? Or is it another piece?
@Ricco86Rodriguez3 жыл бұрын
He put a bigger motor and on that frame it won’t fit unless it’s reversed. I did the same when upgraded my 97cc to 189cc. That’s all
@Goku-oy8wz7 жыл бұрын
hi i have the same bike but it has the factory engine with 95 cc and when i try to remove the clutch the clutch cover comes off but not the clutch please give me your insight
@hksavage63107 жыл бұрын
Goku3674 use a Prybar and a hammer to pull the clutch off. also you are probably missing the clip that keeps the drum in the clutch
@Nahsra586 жыл бұрын
What’s the name of the clutch featured in this video
@killercodplays6 жыл бұрын
Where did u get those spacers from?
@hksavage63106 жыл бұрын
Donteverforgetur passion just the hardware store
@user-oz6vx5jo8u4 жыл бұрын
ace hardware has what they call bushing works like a spacer just need to cut length
@CMichaelLyle2 жыл бұрын
What does oiling one do and how does that make it last longer?
@davidkurtz3971 Жыл бұрын
Keeps the friction between two moving pieces to a minimum
@rudymartin1683 жыл бұрын
Am I the only one who thinks the clutch looks like it is on backwards?? I've only seen them where the chain is on the outside of the clutch.
@mitchellbryant50172 жыл бұрын
I run mine that way too, helps keep the chain on the sprocketand keeps your pants from getting caught in the chain and sprocket
@royramirez45673 жыл бұрын
The hell this guy just went in circles he makes a how to video then says to go find a how to video smh tf
@justinwoods2405 жыл бұрын
What was that spacer looking thing behind the clutch by the teeth
@brysondean67075 жыл бұрын
Justin Woods probably just spacers so that the sprocket on the clutch lined up with the one on the rear wheel
@justinwoods2405 жыл бұрын
@@brysondean6707 I was saying what are they called I know there not washers
@tylersmith94554 жыл бұрын
What size chain are you using
@tuckercole15313 жыл бұрын
#35
@terryhoffman7955 жыл бұрын
i just put a new clutch on my grand sons go kart and when i started the engine the kart took off like a bat out of hell. no one was giving it gas. it was not like this with old clutch on any ideals whats going on. never worked on small engines with a centrifugal clutch.
@SchlobnDaHomies4 жыл бұрын
You need to adjust the tension on the spring, cut a few spirals and reconnect it, that basically allows you to idle without applying pressure on the clutch. You’re going to have to do it a time or two to figure out the correct amount of spirals don’t got too many or else you will regret it.
@mfer50442 жыл бұрын
Just bought a new clutch for the 79CC predator for my kids gokart. The motor spins and the clutch never engages...... any thoughts?
@pedroarreola96502 жыл бұрын
Check if u got the right clutch size that matches the sprocket
@pedroarreola96502 жыл бұрын
I ran a 35 clutch with a 40 chain and it’ll grind like hell
@mfer50442 жыл бұрын
@@pedroarreola9650 got a 35 chain and 12T drive. all matches
@pedroarreola96502 жыл бұрын
@@mfer5044 so ur clutch is a #35? Make sure it says number 35 bro if not then ur clutch is jus toasted some come bs I ordered online and it was trash wouldn’t work went to gts they got a good clutch started right away
@pedroarreola96502 жыл бұрын
@@mfer5044 make sure u get a legit clutch , it’s not ur motor bro I had the same issue it’s a clutch issue wrong clutch or it jus came trashed already
@levishelton33632 жыл бұрын
Is it normal for it to get pretty hot pretty quick
@I_AM_ROB2 жыл бұрын
Yes but my clutch got red hot so make sure u don’t stress it
@arcturusbbqsausagemaking24356 жыл бұрын
WHAT is a good clutch brand to buy I have a 6.5 hp tecumseh 7/8 " shaft
@zebrafreerunning54666 жыл бұрын
ARCTURUS WELDING & FABRICATION STEEL FABRICATION just buy a cheap one from eBay
@iHateKellz3 жыл бұрын
How do I tighten it
@trey1sauce1652 жыл бұрын
Add or remove links, move engine forward or backward as well.
@Oxron2065 жыл бұрын
Ive never oiled mine, Just the chain
@Cnzxco3 жыл бұрын
Oml
@miketimes96254 жыл бұрын
Watching this made me dizzy.
@florida_mtb56178 жыл бұрын
Lol I never oiled my clutch on my bike. It was shot anyway
@hksavage63108 жыл бұрын
i didnt oil mine like ever so the bushing is shot
@shagnasty1156 жыл бұрын
Grease oil grease oil grease oil grease oil!!!!! That's all I heard..... Grease oil
@heyitsjoanna6 жыл бұрын
shag nasty yeah me too
@pallmall76033 жыл бұрын
So you made a video on oiling the clutch but didn’t show how to oil it? Useless waste of time