Coleman CT200U-EX Jackshaft Delete, more speed!

Chain: amzn.to/3EF37GA
Chain Breaker: amzn.to/3Oyy97o
Coleman CT200U-EX
Straight pipe: amzn.to/37wanbk
Socials:
/ discord
/ batahaaa

[@smashedbyhashish]

Good video, thank you.

[@benzo8364]

Hey can I take off the drive chain and still could use the stock chain…

[@jesseholland1851]

What length chain did u use #40 i know is the size of the chain but what lenth

[@jasongilliland9508]

You should get someone who knows how to do stuff to help you, cause man.

[@daytondurocher3382]

How many links are on the chain?

[@codyswilley]

I've got 3 master links on my minibike. 😂

[@demekamitchell404]

😂 I do too

[@MalikCooley-wn2nr]

Is it the 140 link

[@MERICANMOTO]

What length chain is needed my jack shaft has exploded for the 2nd time and I don't Wana replace it

[@jesseholland1851]

Im also tryna figure the length needed if u found out?

[@qt_doppkeboi923]

Could I remove links in my clutch chain because I don’t have a chain tensioner it broke off

[@jasongilliland9508]

Yes, if you get the chain to fit good with no tensioner on it, that's way better.

[@56135613at]

Bout time

[@troyholland3436]

Bro put a bigger sprocket on it unless ur fine with buying a new clutch every month

[@Bataha]

yes, at least a 60 tooth but most likely a 70 tooth. I ended up putting a torque converter on it with a 40 tooth rear.

[@troyholland3436]

@@Bataha will it still go fast with the 70 tooth straight chain?

[@chuckhuff7123]

Is weed legal where you live?

[@DillonMcGee5.0]

the clutch doesn’t break in for me it still smokes, but it’s fast

[@twistedkap3882]

Same

[@Deucealive75]

That's because the gearing is so bad. If I wanted to street ride with a straight chain like this I would build an engine capable of 7K RPM and use a 72 tooth sprocket. It would then have decent low end, cruise nicely at 35 mph and capable of 50 mph. A 72 tooth sprocket would work with a stock engine but you just wouldn't have as high a top speed. My Colemans are used for trail riding only. The torque converter is the way to go for off road.

[@tripps5549]

My jack shaft just spins when I try and take off the bolt please help

[@Bataha]

have you tried holding it with vice grips?

[@tripps5549]

So what I had to do was take a wrench and put it on the bolt and hit with a hammer and it came loose

[@visiongames0681]

I used a fast drill with a socket on there and it breaks loose from it I just did this yesterday😭

[@chuckhuff7123]

Oh boy😮.

[@RDPodCastRadio]

What type of torque converter would you recommend

[@Bataha]

You can just get one off of Amazon, they’re pretty good quality. Check out my other video on installing a torque converter. kzbin.info/www/bejne/pZLNmIWgpNmplassi=qKblXMqhfujinKSb

[@Minibike817]

What's the top speed on it?

[@Bataha]

Check out my other video

[@bradysmith1600]

Where did you get your exhaust

[@Bataha]

amzn.to/3QW2PAF

[@user-gi5yg1vd7m]

What kind of clutch did u use?

[@Bataha]

Stock clutch

[@GluteusMax777]

It needs a a chain tensioner is all.

[@adamdomonski1619]

You can always add one but I don't run one

[@qt_doppkeboi923]

@@adamdomonski1619 my chain tensioner broke off how did you solve that problem

[@mackkess2238]

What size chain is needed?

[@Bataha]

40 chain

[@tlord3316]

What length

[@Payycheckk]

What size is the chain for the jackshaft

[@jesseholland1851]

What length 40 chain?

[@shaneatkins7190]

What's the top speed on it

[@Bataha]

check out my top speed video

[@2.25.am_7]

the chain is way too lose but good video

[@WetleySped]

I can’t get the bolt off that’s on the clutch. Any help

[@Bataha]

Use an impact and hold the clutch in place. If that doesn't work heat it with a torch.

[@MiguelGomez-tb5pc]

You Lokey sound like Evan peters girl American horror story

[@jaycedubose4370]

Deleted my chain three different pieces

[@bikesandbros9878]

W

[@MikeSmith-nn9zn]

It's better to keep the jackshaft on

[@Willy38134]

you have no idea what youre talking about