it makes me feel better knowing that u guys have dirt bikes as well
@NVSRides7 жыл бұрын
+Max Falkner I love the mini bikes. What do you have bike wise.
@jorgeg70575 жыл бұрын
@@NVSRides Coleman ct200u ex with a predator 420cc engine stage 3
@NVSRides5 жыл бұрын
Sounds amazing
@MonkeyMikeOutdoors3 жыл бұрын
@@jorgeg7057 Damn with a stage 3? nice LOL
@elijahkeeper6362 жыл бұрын
Sorry but lots of guys who build things fast and amazing also build mini bikes must be a newb
@FranciscoGarcia-hi3zx2 жыл бұрын
⚠️ Warning ⚠️ your bike may take off after removing your governor. Watch part 2 of this video to fix the problem. ⚠️
@Memesfromthemonkey9 ай бұрын
What do you mean
@timothymundy9668 ай бұрын
link?
@andyfred12vlogs827 жыл бұрын
Haha Nice video definitely went more smooth than mine
@vanover51477 жыл бұрын
lol we meet again
@spaz76053 жыл бұрын
It’s 2021 I just ordered this bike I hope the models are easy I’ve never worked on anything like this!!! Love your Coleman vids bro !!!
@spaz76053 жыл бұрын
Mods**
@NVSRides3 жыл бұрын
You will love the bike. Some mods might have changed but the premise will be the same.
@codygalloway68835 жыл бұрын
Man that was awesomeness! I bought my son a Colmen CT 200 an we love it he still doesn’t drive it by his self but we have a blast with it! I found ur video bc I was looking at some videos bc the clutch chain broke with me riding the other night! It broke the master link on the opposite side of the clip! So I guess until the new chain comes in it’s bicycles LOL I ride it way more that my son Hell I even drive it to Walgreens about every afternoon it’s only about 3 1/2 miles from the house! Any thanks for the video guys an keep having fun!🤘🏼💯✌🏼
@karlg15353 жыл бұрын
You can get a offset link at any parts store for a few bucks usually comes with 4 so you're all set for next time the link breaks! I strap a toolkit to my back rack with extra parts in case it ever breaks on road. Had to walk it a mile once when my master link broke as well, said never again lol
@stfuandLiftBtCh3 жыл бұрын
Join our mini bike group on Facebook! facebook.com/groups/1456529424737006/?ref=share
@turkeysandwhich045 жыл бұрын
I have the same bike with the stage 1 kit, 3910x spark plug and I upgraded the clutch to a Max-Torque. I've always used Castrol Titanium full synthetic oil I feel like it does make a difference. Plus when you use maybe 2 quarts a year....I feel like it is money well spent. I plan on removing the governor this weekend and upgrading the valve springs.....then I'll be done. I might upgrade to a torque converter in the next year, but I'm in no hurry at all. I only have $490 invested in the entire setup and I feel like I definitely got my money worth.
@NVSRides5 жыл бұрын
Let me know how you bike does with the governor out. You for sure got your money's worth at this point.
@spencergodwin72432 жыл бұрын
@@NVSRides I had the same problem they did, but I don't know how to proceed, I got the camshaft back in and lined up, but I tired starting it but it's over revving like crazy so I don't even get to run it
@LokaNator Жыл бұрын
Ong
@froggert11929 күн бұрын
@@spencergodwin7243u need to hook throttle cable directly to carb now
@gusalmquist3944 жыл бұрын
That's a real nice camro in the background
@bryan-kr3xi3 жыл бұрын
it’s been almost 3 years and the guy is still replying 😭😂
@NVSRides3 жыл бұрын
Am I not supposed to? 😂
@bryan-kr3xi3 жыл бұрын
Burning Rubber Garage haha i was just messing around bro
@NVSRides3 жыл бұрын
It is all good. I like to help if I can.
@bryan-kr3xi3 жыл бұрын
Burning Rubber Garage Your vid taught me a lot 😁👍🏽new sub btw
@NVSRides3 жыл бұрын
Thanks and welcome aboard.
@jwleng4 жыл бұрын
it's so glad to see the familiar mountains while you were testing the bike. So glad to know we are in same area. :)
@NVSRides4 жыл бұрын
Got to love those rocky mountain hills huh
@E46TY7 жыл бұрын
You were supposed to remove the governor arm which restricts the trottle and the metal rod that goes into the case from underneath the gas tank. Thats why its not starting right away
@rickyboby1604 жыл бұрын
First video 30 seconds in saw the blue 69 Camaro and I subscribed
@darianfrisbee8433Ай бұрын
I got 32mph on mine by getting full throttle. Haven’t removed the governor yet but I can’t wait to see what happens when I do!
@lordofthestings4 жыл бұрын
They're always hard starting after they've run. You either have to pull it really hard or choke it.
@fggrittayt81014 жыл бұрын
Do you have to do all that extra stuff like remove the springs and all that before actually going in to the engine. I see a lot of other videos and they would do all this extra stuff
@dennyandmartha7 жыл бұрын
really cool video, the only thing is you could of wired open the governor under the seat in a few minutes, I have the same bike and got it at 34 by doing that.. either way cool video and well explained and detail. great job!
@NVSRides7 жыл бұрын
+more pbr thanks we thought about it but wanted to rip into the motor. Maybe on the next one we will go the easier route
@weskleveter51565 жыл бұрын
Can you make a quick vid showing that? Thanks
@franknittie5 жыл бұрын
How do you "wire open the governor?"
@dstolarc6 жыл бұрын
There is a simple way to remove that governor without fighting with that clip. Remove the flywheel and simply punch out that pin that holds it. The entire assembly will come out. If you want to you can thread the hole in that block for a 1/4-20 bolt of just install the pin back in the hole. Much, Much easier than fighting with the clip...
@csyfrostyyt8372 Жыл бұрын
is there a vid
@shaylalarkin55666 жыл бұрын
I have a question for the clutch after I take the little pin out of it what size tool did u guys use because a 15/16 is just the Ranch what is the size screw u use to take it off ?
@NVSRides6 жыл бұрын
BSO_ JayBands I don't remember what we used
@BruceLee-xn3nn6 жыл бұрын
Just had to show off that Camaro
@NVSRides6 жыл бұрын
You caught that huh? 😂
@issiahthomas28225 жыл бұрын
I have a ct100 u i did everything you did but afterwards it doesnt wanna start unless im giving it throttle and ot still doesnt want to stay on or run nearly as good as it did before
@Loverosetoes5 жыл бұрын
What do you do when the choke switch is stuck on on position and will not move to off?
@brittanylesmeister30592 жыл бұрын
Do you think it would be OK if I don’t put that boat back in because there’s a little tab on that pin that will make it sort of slide back-and-forth
@lanesprinkle42642 жыл бұрын
i'm only removing my govoner bolt by the air filter, i might fiddle with some more stuff if i put a torck converter on mine
@coreystirling18639 ай бұрын
Don't even think about doing this ! Makes the bike completely untrustworthy due to the wide open throttle issue that will certainly happen and internal engine damage. I did this governor removal and learned the hard way. If you want more speed get the torque converter mod.
@neillameier86448 ай бұрын
All you have to do is modify the carb to work with the throttle with the governor gone or get a carb the throttle runs through.
@Beltmaker096 жыл бұрын
As far as the oil there not supposed to ship these full with oil in case it leaks. When they tell you there is no oil it means it's not full. They put a little oil in it so when it's boxed it has some something to,keep it lubercated while in transit or storage
@lukasmcwilliams20658 ай бұрын
Do i need to remove the governor arm connected to the throttle? Or just the gear? I already removed the gear and if possible i would like to not open up the engine again just to remove the arm
@fraudz79572 жыл бұрын
probelm i’m coming across is the flap that goes on top of the gear makes the throttle normal, But now i took it off and the bike on choke goes full throttle and when i take it off choke it just dies, So did you mess with the throttle cables or the ones under the gas tank?
@jameskay73707 жыл бұрын
Do an exhaust header and a custom intake manifold and it will also increase your performance. Also you could re-jet the carby
@NVSRides7 жыл бұрын
+james kay I think that is the next step then a bigger motor. Thanks for the tips.
@jrc-fabs16342 жыл бұрын
Great video, I'm gonna do this ibe done it before but forgot how know I remember
@nicholasbeaton13833 жыл бұрын
Now I took out the governor and my bike takes off on its own when I mess with the choke so I did what you did in part 2 and it worked but my bike dosent wanna stay running so everytime I let go of the throttle it wants to shut off when I’m riding
@zachmerchant90654 жыл бұрын
To get that little ring out I pushed one end of the ring into the plastic using a hammer and a flat head screw driver then sharpened a paint lit remover and pulled the ring right off. Had this job done is a little over an hour
@spencergodwin72432 жыл бұрын
Hey, so I took my governor out, and when I took the cover off the camshaft slipped out and I put it back in, and lined up the marks on the camshaft and crank shaft. But now when I start it, it over revs very quickly
@jibjubtoaster23114 жыл бұрын
I did it now my bike won’t run or start please help
@nessar23785 жыл бұрын
I just did the governor removed everything worked like a charm except it won’t stay on idle ? How do I adjust the carburetor
@NVSRides5 жыл бұрын
Check out part two and see if that helps you. Thanks for watching and the comment.
@joshG15134 жыл бұрын
in the stock form the governor arm(in the crankcase) was pushed out further than it is after this mod. removing and leaving out the plastic cap/nub that sits on top of the "governor stud" allows the governor arm outside the crankcase to let the throttle hang open. add a spring from external gov arm pulling towards front of bike.
@brennenlabrier51632 жыл бұрын
I did this as a weekend project and followed along with the vid step by step and put it all back together and its not wanting to start, do you know of any common overlooked reasons for why not starting after this process? Thanks for any feedback.
@aidancox450Ай бұрын
Same bro
@thomasbowen81123 жыл бұрын
Would this work on a John deere L110? It has a 25hp Briggs and Stratton engine I think 724cc. And an HD K46 hydrostatic transmission. I'm not mechanically inclined too much so pardon if it's a dumb question. Would removing the governor increase the max speed of my riding mower from 5mph to 10 mph or 50 mph or what? I can't find the answer online at all lol
@Hellcat13202 жыл бұрын
When I tried to take the castle bolt off the bike started moving, any ideas on how to fix this?
@YuuBet7 жыл бұрын
It should go allot faster... I have an 80cc mini bike that does 35mph tops and all I did was Jerry rig the spring lever.
@josephrice354 жыл бұрын
I tried removing the governor off of my ct200uex and it doesn't put out exhaust pressure and won't start do you know what I could have done wrong
@cth02116 жыл бұрын
try a 41 tooth rear sprocket for a 8.2 to 1 ratio. little better than stock 10 to 1 ratio.
@robspear035 жыл бұрын
Thatll up top speed, but torque will suffer a tad. Its an offroad mini bike. 30+ mph is more than sufficient for a bike with no suspension.
@efrenlazatin69193 жыл бұрын
What is the combination of sprockets?
@ryanwidrick26334 жыл бұрын
What you do with throttle wires push and pull not that bolts gone??
@Sean-kg7vh3 жыл бұрын
I did this and my bike went rogue lmao. Almost went through my patio door. Did you adjust anything after ? Or what position did you leave butterfly valve in?
@NVSRides3 жыл бұрын
Check out part 2. I learned the hard way as well.
@Sean-kg7vh3 жыл бұрын
@@NVSRides Cheers. Subscribed
@NVSRides3 жыл бұрын
I take it that fixed it
@Sean-kg7vh3 жыл бұрын
@@NVSRides Yes, thank you. The beast has been tamed. Now I got parts on order.
@NVSRides3 жыл бұрын
Hope you enjoy the bike.
@tomsmith39876 жыл бұрын
look at motorcycles. mopeds.scooters,4 wheelers.all one long chain and different sprocket.could you do a video on just using one long chain and different sprocket and smaller tires? I would like to see the speed thrn
@justinschmidt16 жыл бұрын
I have a ct100 and just picked up a ct200 the other day. Its interesting how I was able to get my 100 to hit 35-40 mph just by removing the limiters on it. It has no torque at all and wont even pull me up a hill in grass but it can fly pretty good on the street. Never had any issue holding it at WOT max rpm for long period of time The ct200 is polar opposite. 10X the torque and balls down low but then just falls on its face/hits the limiters at like 25 mph. Ct200 is much more enjoyable off road but i think my little 100 would fly by the 200 on the street currently. Gonna have to remove the limiter.
@NVSRides6 жыл бұрын
Justin S I have not been on the 100. I am sure on flat ground it might run past it given the description you gave me.
@justinschmidt16 жыл бұрын
Yea I can tell you without a doubt the ct100 has a higher top speed than the Ct200 with just the throttle screw backed out all the way. It may take 1/4 mile to get there but it gets there LOL. Using GPS app on my phone I was seeing 33-35 on the 100 and almost 40 down hill. Id assume its all in the gearing. The ct100 doesnt have a jackshaft at all so has no low end but higher top speed.
@michaelgreenbauer61004 жыл бұрын
I have a ct100u too and it does 38mph with tacking screw off for gov... I put a peddle bike computer on it and programed it to tire size. ps I way about 160. I did put a chain titchener on it otherwise it would throw the chain. I awe so have a predator 212 non hemi and does 24 -30mph thinking about getting tires from a ct200u and putting them on my ct100u any one know if they will fit? and how about putting a torque converter to get more hp for up hills? looking to spend less then $150 maybe $200. I awe so put a amo box on the front for battery to hook up head, break, turn, running lights and got it registered at the dmv as a moped in Michigan!
@crackerjack81154 жыл бұрын
No clutch it's straight drivin
@javonnypaung262912 күн бұрын
How do you take out a governor on a GMB100 mini bike?
@justiceguernsey44176 жыл бұрын
What is the chain size
@masonm2555 жыл бұрын
How do you move that black arm thing by the govenor
@TheATVboy177 жыл бұрын
castle nuts aren't meant to be tight thats why theres a cotter pin to keep it from unscrewing
@Deucealive757 жыл бұрын
To do the job they did you do not need to touch that castle nut. Just remove the master link on both chains then remove the clutch and jackshaft.
@204azfc4 жыл бұрын
Mine won't unscrew
@204azfc4 жыл бұрын
Tire spins no matter what I do
@ClydeBubbaSmith19623 жыл бұрын
I have a Coleman CT200U. When cranking the bike, it automatically accelerates. Thought it might be the clutch, but it looks good. It's about 2 years old and hasn't been ridden that much. The grand-kids are getting older and would like to get it up and going again. Thanks.
@NVSRides3 жыл бұрын
Check out part two of this video. After removing the governor my bike did the same thing. Would just take off. Hope that is the fix.
@hornmonk3zit Жыл бұрын
@@NVSRides The intake valve is almost certainly warped and not closing so it's basically letting in fuel all the time, the valves instantly start warping if you don't get them 18lb springs before removing the governor. I toasted my go kart's engine the same way only it lost half it's power and randomly slams to a stall while driving. You should also get a billet flywheel or engine swap to a Tillotson before the stock flywheel grenades into your crotch. Edit: Or it could be the governor arm shifted in inside the crank case and is doing the opposite of governing because you left it in the engine hooked up to the carb.
@coreystirling186311 ай бұрын
Will you please elaborate on the edit part. I'm experiencing the wide open throttle as well. Thank you
@coreystirling186311 ай бұрын
@@hornmonk3zit please read the edit request sometime.
@hornmonk3zit11 ай бұрын
@@coreystirling1863 You mean the governor arm thing? There's a little arm coming down inside the case that normally is controlled by the plastic governor gear, without the gear there it can noodle around and hold the throttle open if the long double hooked spring is still connected to it from the throttle body. What you normally do when removing a governor do what they do in the video and remove that arm and the long spring, then you tap the hole where the arm was with 1/4"-20 threads and screw a bolt with some loctite in there to plug up the hole.
@AsTheWheelsTurn5 жыл бұрын
fat chance of getting a response but Ill give a shot...I bought one of these recently used and it burns oil big time, what should I be looking for to fix that? otherwise it works perfectly just real smoky especially when sitting still or first taking off. I am thinking a gasket or piston ring? I dont mind guessing and just ordering some parts its just a toy for me to tinker with but id love anyones opinion on it...
@NVSRides5 жыл бұрын
It could be a gasket or a seal. When mine acts up I will swap on a predator engine from harbor freight.
@vinnybrown5194 жыл бұрын
So I did this to my Coleman n sadly the pushrods fell out n now when I start it, it just runs off. I just bought a Mikuni carb so it can’t be that any fixes?????
@NVSRides4 жыл бұрын
Check out my part 2 and see if that helps bro
@oh40134 жыл бұрын
Take the idle down
@gamerflop1014 жыл бұрын
I did this to my coleman ct200u-a and now it won't start. Any ideas ???
@shepquinn90853 жыл бұрын
Same
@loopsan65733 жыл бұрын
How fast did you guys get to i just bought one yesterday an I want it to go faster
@MalikCooley-wn2nr26 күн бұрын
Can you do a jack shaft bearing installation video
@Shrined2 жыл бұрын
Did you have to add a new carb or throttle assembly? I heard it messes the original one up??
@NVSRides2 жыл бұрын
Just have a stage one kit for mine. Intake, header pipe, and jets. No issues with mine yet.
@skillchamp42082 жыл бұрын
I have a upgraded carb and a straight pipe and upgraded air filter I’m sure if I remove the governor with these parts it’ll even go faster
@k.r.v.42196 жыл бұрын
Wow that's great! Now you could low the great ratios to get more acceleration!!! Maybe loose some of the speed you gained, but get better power down! What does that big nylon grear drive? Also I wonder, if you need to go inside the engine? What connects to that arm under the gas tank? You know the one that's contracted to the mechanism inside? I bet if you remove that link from the arm to the carb? Leave the inside alone and dismantle the linkage in the outside! Now either get a smaller sprocket at the engines end, or a bigger sprocket on the rear wheel. That would lower you gearing to give you better acceleration, but take away mph on top, from 34 to maybe 30? But it would climb hills better and be better in mud and sand!! Now try looking at what I said on the nice camo bike! See if you could disconnect whatever the governor does outside the crankcase! I bet it can be done in minutes! But beware! You will go through engines faster! You can also try bigger carbs. Open exhaust pipes! To help the engines last, try adding Marvell Mystery Oil to the gasoline! Just a couple ounces would help the top end, it would also slow the burn in the combustion chamber down, in effect raising the octane of the gas! It would also help cool it down! Good luck!! I bet with a tq converter that little bike would go 40+ mph!!
@robspear035 жыл бұрын
TQs actually rob power, up to 10-15%. Due to friction. Best to stick with the jack shaft and play with gearing.
@conner56114 жыл бұрын
Thats a nylon camshaft
@brittanylesmeister30592 жыл бұрын
I took the governor out and all that stuff and then I went to start it back up and it launched and if I hold the brakes all the way in or still moving only thing stopping me from moving is it in the Killswitch what is the cas
@NVSRides2 жыл бұрын
Check out part two. My bike did that as well
@drelewis5236 Жыл бұрын
Wat to do if my chain keeps falling off my coleman min bike
@CasualMilkEnjoyer Жыл бұрын
I could not undo one of the bolts and don't know what to do
@stephenlepore4476 Жыл бұрын
smiles tell the whole story. radical.
@morganmiller63923 жыл бұрын
i only have 10w40 do you think it would be ok if i used that instead of 10w30
@crackawood3 жыл бұрын
i live in west texas and it gets hot so all i use is 10w40
@hornmonk3zit Жыл бұрын
I wouldn't recommend messing with the governor much on an unupgraded motor unless it's a Tillotson or a real Honda, the cast flywheels are known for exploding and sending people to the morgue even at stock RPMs, and from personal experience I can tell you you will warp the valves in a couple hours of use and basically kill the engine and if the rods or crank break you will definitely kill the engine. Best way to get a speed increase on this particular Coleman is to buy a new sprocket for the jackshaft, I believe stock it's a 10 to 20 tooth setup and all you have to do is switch out the 20 to another 10 to double your top speed. It'll be a little slower on the uptake but on flat streets it won't make much difference, if you're planning actually offroading then upgrade or swap the engine and either keep the stock gear ratio or don't change it as much.
@tobysmith872711 ай бұрын
I used 2 fillet knives to get it. There pointy. It worked.
@ammkad4 жыл бұрын
Is this the same procedure for the Coleman ct200u-ex?
@NVSRides4 жыл бұрын
Yes same motor.
@wyattharrison66567 жыл бұрын
Not sure if this is normal but I'm having extreme difficulty removing the engine cover after taking off the clutch... all the bolts are removed it's come up a tad but it won't come off... tried like everything in the book short of taking a crow bar and messing up the cover or gasket.. any suggestions??? Please and thank you..
@NVSRides7 жыл бұрын
+wyatt harrison I think you would be ok to pry with a screw driver that can stick over time. As far as I can remember nothing is hooked to it.
@NVSRides7 жыл бұрын
+wyatt harrison make sure you got all the bolts out as well
@wyattharrison66567 жыл бұрын
yeah so im not sure whats up with mine.. but when i try and pry the cover off the whole crank shaft is moving with it when it should just slide off? no clue whats going on... all the bolts are out and its really pissing me off lol.. the bike is like 2 days old too
@seggsince03186 жыл бұрын
I used 2 flat head screw driver's put one on each side and opened it up
@juanfl89213 жыл бұрын
Some how mine won’t turn on any more :’(
@Back.yard.stunts2 жыл бұрын
I just got my ct200u-a I think I’ll stick with a exhaust mod and maybe a cool air intake with a upgraded carb for speed for now. I’m no mechanic so I’ll wait on the governor😂😂
@jaycavazos98575 жыл бұрын
After I removed my governor my engine does not run correct. I’ve redone the valve lash and put the cam and crank in time. Any suggestions would be appreciated!
@-CallMeMoth4 жыл бұрын
Jay Cavazos you have to redo the throttle linkage
@mikewasfaret956311 ай бұрын
Maybe I should leave ours alone. Bought it used, and it does 35. Only mod I know for sure is a exhaust. But I have to rebuild it because burned a hole in piston, I believe. Had it for a couple years before it blew up.
@1darrious2tim7 жыл бұрын
take the jack shaft off run one chain to the clutch and sprocket you should get 55 mph with exhaust and jet carb 60 mph!!!!
@NVSRides7 жыл бұрын
+big dog might have to try that. Sketchy is the word that comes to mind.
@1darrious2tim7 жыл бұрын
Burning Rubber Garage bro we did it and ran 49 depending on weight!!!!!
@1darrious2tim7 жыл бұрын
but we never took the governor out!!!! so you might go faster!!!
@zachrittenhouse12136 жыл бұрын
big dog dont you lose acceleration with one chain
@1darrious2tim6 жыл бұрын
+Zach Rittenhouse yes but gain top speed
@juanfl89213 жыл бұрын
“Update” now it turns on but it accelerates without me accelerating
@NVSRides3 жыл бұрын
Check out part two
@teej._11 ай бұрын
wonder if you still responding 6 years later
@JoshuaCampos-sp5bx3 ай бұрын
Hello I just did this to my CT200U and now it wants to drive freely with the choke all the way off?? Please help????😭😭
@NVSRides3 ай бұрын
Check out part two
@BmanS2_on_ttv2 ай бұрын
Followed the exact same steps and mine idled at max rpm? What should I do to fix?
@NVSRides2 ай бұрын
Check out part 2
@JNC19732 жыл бұрын
My Mini Bike also did only 24 Stock but after buying Stage 2 Kit and slapping a 30 Series Torque Converter on it I now am able to reach 42MPH. :) Get a Torque Converter it's worth it !!
@frankjerome33294 жыл бұрын
What did you do to go from 20 to 24 originally?
@NVSRides4 жыл бұрын
It is a throttle screw in one of my earlier videos if you want to check it out
@b.driguez85432 жыл бұрын
I zip tied the governor spring with me on it 170 pounds hitting 31 mph With my 13 yr old son 130 hitting 34 mph. Try running the chain from clutch to back tire.
@samuelcroft45113 жыл бұрын
I watched your video and removed my governor and now my throttle is stuck wide open how do I fix this
@NVSRides3 жыл бұрын
Check out part two
@jeffthompson35294 жыл бұрын
Is that some sort of graphite cam or something
@-CallMeMoth4 жыл бұрын
I just got a cc100x and bent the screw now it goes 36 so is it even worth it to take off the governor?
@nicktravascio83373 жыл бұрын
Can you explain what you did? What screw?
@-CallMeMoth3 жыл бұрын
@@nicktravascio8337 the screw that makes the throttle linkage stop at a certain point therefor making it slower so when the bike is off pull the throttle and you should see the linkage for it moving and eventually hit a screw so if you bend the screw away from the throttle then the throttle has more room to go forward so the bike goes faster but dont bend the screw to far or the throttle gets stuck - make sure you have a cc100x and not the ct200u
@danhold17 жыл бұрын
good job
@NVSRides7 жыл бұрын
+danhold1 Holdcroftski thank you
@skidokare884 жыл бұрын
Did everything from video 1 and 2. It started yesterday but now it won't start. Filled it with gas and have been pulling the cord for a 20 minutes. Any ideas?
@noahamsbury12684 жыл бұрын
Timing is off
@204azfc4 жыл бұрын
How come my bolt wont come off?
@walkerwalkerali3 жыл бұрын
Is it okay to remove a governor on a 212cc predator without any mods? Just got a hemi sense I sold my last 212 non hemi with my go kart and now im trying to build my old ct200u back from the dead
@NVSRides3 жыл бұрын
You run a risk whenever you take the governor out. Some mods will help the motor as it revs way past where it should.
@abrahamsanchez55092 жыл бұрын
Hey! I followed what y’all did but now my bike is contantly reving when I start it. Any ideas what I may have done wrong?
@NVSRides2 жыл бұрын
Check out part 2
@abrahamsanchez55092 жыл бұрын
@@NVSRides how did you remove the spring? I cant seem to get mine off
@Polaroidwhite2562 жыл бұрын
I did this and started it up and I don't know if the throttle got stuck but it was wide open pop a wheelie went circles broke a foot peg
@danielespinoza78802 жыл бұрын
I just removed my governor but when I start it up, it automatically accelerates to full revs, it literally sounds like it’s gonna blow up, now I’m just wondering why I did all these speed upgrades… :(
@NVSRides2 жыл бұрын
Check out part two?
@Marcfj456 жыл бұрын
What the utility of the governor ? Can it break the motor if we run without it ?
@NVSRides6 жыл бұрын
+Marcfj45 yes you can over rev the mirror and blow it up. If you are careful and not always full throttle you should be fine.
@NVSRides6 жыл бұрын
+Marcfj45 just food for thought mine had been out a long time and mine is still going strong
@evanbennington6 жыл бұрын
I got the clip out but the governor still won’t come out. Does anyone have some tips?
@NVSRides6 жыл бұрын
+EliteSnowman that is odd this one came right out.
@jeremymckuin44116 жыл бұрын
I am sure that I screwed up something when I took the governor off. It starts up right away but when I take the choke off it takes off full speed ahead. I'm sure you guy's know what I did wrong and I would really appreciate some advice. Thanks!
@NVSRides6 жыл бұрын
Check out part two of this that addresses that problem
@NVSRides6 жыл бұрын
Oh and I have had to fix it a few times because the spring I used was not super strong.
@ryanritala16363 жыл бұрын
Hey guys so I did that same mod on the same bike and when I start it with choke on its full throttle after looking at it the lever on top of the governor isn’t moving ? What did we miss?
@NVSRides3 жыл бұрын
Did you check out part 2
@ryanritala16363 жыл бұрын
@@NVSRides no I’ll take a look thanks!
@NVSRides3 жыл бұрын
Hope your issue is the same that I had
@Universal_Knowledge3692 жыл бұрын
What was the first mod to make it gain 4mph? Cant find the video on your page
@NVSRides2 жыл бұрын
Backing out the throttle screw. Very simple video it is on the page but down a little ways.
@603boystv23 жыл бұрын
hey man I just bought a new ct200u-ex gonna do the same thing hopefully it works 🤙
@NVSRides3 жыл бұрын
It should. Just take your time.
@mikebeegle8900 Жыл бұрын
Did it work
@NVSRides Жыл бұрын
Mine is still running.
@reecemckee66907 жыл бұрын
MORE MINI BIKE MODS!!!!!! I WANT MORE!!!!!!
@NVSRides7 жыл бұрын
+Big Daddy I will try and get some up
@reecemckee66907 жыл бұрын
Burning Rubber Garage Thanks. I appreciate it.
@reecemckee66907 жыл бұрын
Burning Rubber Garage Thanks. I appreciate it.
@Ch1cken6 жыл бұрын
i cant do it its too much work maybe i might hire someone to do it
@NVSRides6 жыл бұрын
It isn't too bad just be careful and you should be fine.
@Ch1cken6 жыл бұрын
Ok
@billgarrison56546 жыл бұрын
No gasket on the side cover?
@NVSRides6 жыл бұрын
+Bill Garrison I don't remember seeing one
@connorkingHUFCO5 жыл бұрын
Did everything on this and now it won’t start... :/ any idea why?
@NVSRides5 жыл бұрын
Did you check out part two. I later switched to an e3 plug to help it start better. If everything is how it was you should fire right up
@arnxlfo_m03703 жыл бұрын
Hi I did this to my bike and it accelerates by itself once turned on what do I do please help
@NVSRides3 жыл бұрын
Check out part two
@jamesdoak4064 жыл бұрын
Now that I removed it now when I turn my choke off the bike wants to take off any help with that would be great
@myrtlelittle41304 жыл бұрын
Turn down the idle.
@NVSRides4 жыл бұрын
Check out part 2 see if that fixes it for you.
@-CallMeMoth4 жыл бұрын
You have to redo the throttle linkage my friend did it