right, i have a 2.0 skyactiv :/. Im still putting headers and a tune on it though lol
@lonewanderer9584 жыл бұрын
RoastedHamLLC careful the skyactivs are weird, they dont take to mods so kindly like the other 2.0 base, 2.3 and 2.5.
@That4.83 жыл бұрын
I'm picking one up today no joke bro
@MinecraftManiacMC4 жыл бұрын
You should definitely make more mazda vids! I'm in the process of going turbo in my 2.5 as well! Great Content!
@gerrit83504 жыл бұрын
vFatalSpartan how much are u spending?
@chandlertilton24274 жыл бұрын
@@gerrit8350 I looked into getting my 2010 m3 2.5 turbocharged. It was a lot of work but more than that the cost would have been around 5000 if I rushed it and 6000 if I did it right with a new manifold from.
@kingofpilgrims3683 жыл бұрын
@@chandlertilton2427 damn. I’m looking into buying the car right now, and thought of doing the same. Do you find that price not worth it for the car?
@chandlertilton24273 жыл бұрын
@@kingofpilgrims368 honestly I love the platform of the 3 really cool body style the only problem is the 2.5 motor itself.. it's just not good to boost. Part availability for the engine components is pretty minimalistic compared to something like a Honda motor... I'm going to be custom fabricating a Mazda 3 inspired tubular chassis and I'm not 100% sure on what kind of motor I want to put in it but it won't be the 2.5... my buddy spent $4,000 to get his motor built by Ford performance and only ended up making 60 more horsepower... And the the 2.5 STILL couldn't handle being boosted
@bandofbros81123 жыл бұрын
I would love this in my 2.0L Mazda 6 sportbreak from 2009. Would love to add a bit more torque and hp to it. Add some coilovers too.
@Toguro-oy3ld4 жыл бұрын
One of the Finest sorted Turbo 3s I’ve ever seen, Very Nice! I like that top floor parking building, you should find that building in Vice city, jump off of it, just for fun don’t forget, the car I’ll just bounce around then either go fix it at the paint shop or car jack another one.
@ColtonRichter4 жыл бұрын
😂😂😅
@3dscalerc8255 жыл бұрын
nice Video, I am about to start a 2004 Mazda 3 sedan 2.5 Swap build and going to boost, pretty much same path
@ardyhx2 жыл бұрын
how did it go?
@AndresRodriguez-it7hk2 ай бұрын
Howd it go
@lyyre_mzr4 жыл бұрын
Loved seeing this. My MZ3 5 speed is on the way out and I’m very close to buying a blown MS3 and harvesting the 6 speed transmission and turbo bits for my 2.5 swapped 08 Mazda 3. Seeing him run 10psi reliably is reassuring too.
@ColtonRichter4 жыл бұрын
You can also run more! I've seen 12psi a stable amount in these builds.
@Dyl_Cam3 жыл бұрын
@@ColtonRichter Hey how does the speed3 trans fit into a 2nd gen skyactiv? Is that the closest trans that can handle 400hp? I'm trying to be the first one to get to 350-400 on a sky 2.0 with a supercharger haha
@Sk0die2 жыл бұрын
@@Dyl_Cam Far out that's quite the challenge. Good luck tho, how much power are you currently making? I've always wondered what the 2.0 was capable of.
@immaaron6 ай бұрын
I have a 09 3 sedan I can’t wait to start doing this stuff
@ColtonRichter6 ай бұрын
Yay!
@dothedashkj5 жыл бұрын
That’s fire 🔥 can’t wait to swap the 2.5T in my 05Mazda6s
@ryansully45934 жыл бұрын
What transmission are you gonna run?
@erick95413 жыл бұрын
very nice to know, thank you for all your hard work. very hard finding anyone doing this with a 2.5 mazda. ive been debating how to go turbo with my 2.5 mazda 6. you've given me inspiration. one question, hows the transmition holding up? how much hp can i go without upgrading it?
@ColtonRichter3 жыл бұрын
Speed 3 transmissions can normally hold up 400hp, clutch would need an upgrade though.
@DPain82 Жыл бұрын
Cork sports is your friend, enemy.
@jungeezy3 жыл бұрын
Dude this is so sick. If I ever find a cheap donor MS3, I’m definitely swapping some stuff into my 2nd gen 3 sedan.
@HorizonOutOfWar3 жыл бұрын
This is my dream with my 2.0i.
@ColtonRichter3 жыл бұрын
Dream big, play harder!
@project2ndgenspeed6725 жыл бұрын
Very nice. Finally got my 2012 Mazda 6 2.5 boosted last week. It's cool that other people are finally getting around to boosting their 2.5.
@ColtonRichter5 жыл бұрын
Sick!
@MrSupdarty4 жыл бұрын
I have a mazda 3 2.5 BL hatch, how much would it cost to boost her?
@project2ndgenspeed6724 жыл бұрын
@@MrSupdarty anywhere from 4-8k
@afx31_3 жыл бұрын
@@project2ndgenspeed672 I'm looking into doing the same on my GH wagon! Curious to what you did regarding ECU/tuning? I can't imagine the Speed3/MPS ECU would work due to the DISI? Thanks in advance for any help
@project2ndgenspeed6723 жыл бұрын
@@afx31_ awesome! I went through a remote tuner to tune the ECU via mazdaedit. You're correct about the DISI ECU, it would not work without transferring pretty much everything out of a speed which is not worth the trouble imo(the stock 2.5 ECU works just fine for lower boost and for high boost you could use a standalone if it was necessary(a standalone would be much cheaper and easier than a full DISI swap)).
@ericbeltrami27182 жыл бұрын
Project Chimera; 1992 Mazda MX3 gs, Mazdaspeed 6 transmission, custom Drive shaft, rear diff with rear subframe and components from 1988 Mazda 323 gtx, the V8 out of the 1999 Ford Taurus SHO 3.4 l quad cam 32 valve V8. At the bare minimal I could make it front wheel drive with either the five-speed or 6-speed since from what I understand it will bolt up to those Transmissions along with the mtx75 out of the Contour. You can also do something crazy and use the mtx75 Contours differential which is a 4.06 to one final drive instead of the 3.6. Due to the drivetrain using shift cables I might be able to fit the drive shaft between the Center tunnel of the car. The electronic limited slip uses a 5 volt signal which I think could be regulated with a adjustable 5 volt signal hooked up to a map sensor on the engine. Madness I tell you! Madness! By the way the car I want to fix up looks like the one in my profile pic but has orange racing stripes. Like Speed Racer. Was supposed to be 24 lemons racer but I rescued it before they could put a roll cage in it. Lol.
@bricegraham82563 жыл бұрын
Hopefully I can do this with my sedan someday
@Noelsterrr3 жыл бұрын
Honestly you don't even need a 2.3 mzr for the 2.5 swap. As a whole, the 2.5 duratec is capable of handling a turbo and as much as 500hp; unless you're running an automatic transmission, I wouldn't push too far past 350hp. - You'll need to tap into the oil pan (as high up and to the left of the drain plug as possible, clearance issues in oil pan right side) for the oil drain, install an oil cooler sandwich plate for turbo oil feed. - Install an aftermarket pcv plate along with a good quality baffled catch can (no eBay cheapies or you'll be leaking oil everywhere) in most cases you don't need a vented can unless you're pushing 350hp or more. - Purchase a Mazdaspeed 6/3 turbo exhaust manifold/downpipe. If you don't have the hood clearance like with the speeds, you can run the turbo intercooler feed underneath the motor like Ford does with newer vehicles. The top mount still looks sick if you can get it to fit but running underneath will increase thermal efficiency. - Whichever route you go, I recommend wrapping all of the intake/intercooler piping with gold reflective tape because it reflects up to 75% of ambient heat, keeping your intake/engine temps down. - You will need an mzr cylinder head to run direct injection, this may require an mzr 2.3 oil pan, valve cover and intake manifold. - I recommend port injection because it's more efficient, reliable and cheaper if you don't already have the 2.3 donor parts. - Most importantly, check out car-part.com before going to whatever scrap yard to buy your 2.5, I had a yard quote me $500 bucks for a full 2.5 assembly but I found mine for $175 on the website listed above. Good luck y'all and have fun with it! Any questions? Leave a reply, I'm currently in the middle of swapping my 1st Gen Speed 6 so I'm always here to help.
@ColtonRichter3 жыл бұрын
Good write up!
@dakkadakka91893 жыл бұрын
Hi I have a 07 sedan with a 2011 2.0 engine 5 speed manual with a aftermarket clutch and I kinda wanna turbo my car, for exhaust manifolds can I use cx7/ speed exhaust manifolds or a manifold from a transverse mounted ecoboost ie an escape ? Can I just run a t connector on between my throttle body and airbox to run boost pipe into, can I get factory ecu flashed and tuned for a turbo I'm looking to do this for cheap as possible with out it being completely garbage mickey moused together, not looking to run a lot of boost probably around 4.5-5 psi what's recommended for a decent cheaper front mount
@Dyl_Cam3 жыл бұрын
As a whole?? As in a regular 3 trans can handle 500hp? That can't be right
@Ejiokpa165 жыл бұрын
I used a speed3 TB instead of the 2.3 one in my swap. I can’t wait to turbo build mine. I see that Drtuned sticker. I’m tuned by him as well NA on 93.
@ColtonRichter5 жыл бұрын
You've had that 2.5 for awhile now eh?
@Ejiokpa164 жыл бұрын
@@ColtonRichter Almost 2yrs next year January. I didn't get tuned till this past summer. It definitely pulls harder than the 2.3 NA. It has also been more reliable.
@ColtonRichter4 жыл бұрын
Of course
@dkis8730 Жыл бұрын
I'm looking to swap a 2.5 in my Mazda 3 daily bc I just blew the 2.3, but I really don't think I'd recommend turboing it. An all motor k24 makes more power than this turboed, and it won't be super cheap or easy to turbo this car anyways.
@Ejiokpa16 Жыл бұрын
@@dkis8730 it’s really easy to turbo the 2.5 and make safe reliable power? I have plenty of friends who have done and road course their vehicles. A k-swap might be “easier” but it all depends on your goals.
@romariosmith4224 жыл бұрын
Exhaust is too tame for my taste but AMAZING BUILD.
@kartaku132 Жыл бұрын
I'm currently in the process of putting a 2.5 in my 07 Focus
@ColtonRichter Жыл бұрын
Schweet
@kiwithechameleon265 Жыл бұрын
I’m trying to turbo my 2.5 but I can’t find a turbo exhaust manifold for the life of me. Can u link the eBay one you used?
@higherwrldsprodction29552 жыл бұрын
i do have a 2.5L intake manifold from i believe a fusion or an escape. cant remember but very similar with some custom work. Vacuum solenoids ports for the sensors need to be ADDED to the body of the intake as well as a custom plate for 2.3L throttle body. Nothing crazy was a pretty straight forward swap with little resources.
@cookiesnruntz5 жыл бұрын
A misfire in cylinder means the motor is shot? It's a simple fix lol
@tricitydash22615 жыл бұрын
Delaney 12 I think he means motor lost compression in cylinder 3
@ColtonRichter5 жыл бұрын
He meant compression lost, he mentioned he said it wrong after we uploaded and I didn't catch it while editing 😅
@alexhenseler4 жыл бұрын
It’s cheaper to put a new motor in then fixing that but if you can do it your self then it would be worth it
@bricegraham82563 жыл бұрын
@@ColtonRichter I kinda figured
@stephenoreilly59794 жыл бұрын
Really appreciate all the videos you make man, just out of curiosity, was he running 14lbs on stock internals? I'm starting a supercharged 2.5 swap into my 08.5 sedan, I'm probably going to beef up the internals a bit anyway but I just wanted to know what he was running.
@ColtonRichter4 жыл бұрын
Correct, stock internals are capable around 300+
@Bimeerwa5 жыл бұрын
I have 2008 Mazda 3 1.6 turbo diesel. I want that blow off valve , it will be so funny that sound coming out off a noisy diesel,
@ColtonRichter5 жыл бұрын
Haha, straight pipe er
@Seb-522 жыл бұрын
I have an 04' mazda 3 hatchback. In the future, I may swap a k20 k-series engine
@ColtonRichter2 жыл бұрын
Sweet
@lorenzocasillas1318 Жыл бұрын
Great video I have a 2008 Mazda three hatchback 2.3 and I’ve been wondering what I need to do to swap it to a bigger engine.
@taylorwhiting12115 жыл бұрын
I did the swap with my 04.. yes it def is more work.
@ColtonRichter5 жыл бұрын
Yep!
@boostedmazda3s8103 жыл бұрын
260hp isn't even breaking a sweat for that 2.5 bump it to 350-370whp asap!
@ColtonRichter3 жыл бұрын
All the boost!
@viivcreations9161 Жыл бұрын
how about a 350z with ls swap now that would whoop both of these, good vid
@ColtonRichter Жыл бұрын
I think anything LS would whoop haha
@MartyrMachine Жыл бұрын
Ah yes, the Maazda 3.... Mahzda!
@plebeyodestroyer76813 жыл бұрын
Wow a lot of mods and really awesome performance modification that I didn't even know would be possible!!!Any input so as to add more power to a stock 2.0 naturally aspirated engine sedan 2011 like mine ?? Cheers really great vid !!!
@ColtonRichter3 жыл бұрын
I have a video that lists off every single thing you can do to increase performance to those motors!
@e.g.58063 жыл бұрын
With no beefed up internals, my guess is that he’s had some issues since this video was made.
@EvlEgle4 жыл бұрын
Can get those ford 2.5s for 250-500$ usd
@dkis8730 Жыл бұрын
I'm about to pull one from my local pick n pull for $200
@AndresRodriguez-it7hk2 ай бұрын
@dkis8730 Did You do an Engine swap from a 2.3? If so how'd that go and what other parts did you have to swap out?
@streetrace-kg6nf4 жыл бұрын
Hello, how are you? I am from Kuwait. I have a Mazda 3 hatchback. 2008 The car's engine is 1.6 and I want to put 2.5 and most of the workers tell me they cannot. Is there a transfer please benefit and what parts do I need, thank you
@ditiromodisane690711 ай бұрын
Can somebody just take a world tour to ressurect our MS3 here in Botswana 😮
@brotherhood_ofstreetracers4268 Жыл бұрын
Very different but could have bought a blown speed3 rebuilt and made 400 probably pretty close in price too compared to the 280/300 this makes
@boosted0079 Жыл бұрын
I know this is a 3 year old post, but what I'm curious mostly about is the tuning. I tune a lot of GM stuff using HP Tuners. I have an 06 Mazda 6 with a 2.3L and 5 speed trans. I'm very capable of building a turbo setup for the engine and i was thinking of running 5 or 6psi of boost, but my biggest obstacle is tuning. HP tuners does not support the 06 naturally aspirated ECM. I'm sure there are other tuning platforms that can, or maybe it's even possible for me to switch the ECM out to an 07 or 08 year. Not sure yet. So how did you go about getting it tuned? There's no way in hell i would even consider running it without a tune lol
@ColtonRichter Жыл бұрын
He went with DRTuned
@АндрейМаргаев-ж2о4 жыл бұрын
Какой Программой производилась корректировка топленых карт и остальная настройка??
@josemacias94374 ай бұрын
Good afternoon friend, question, you had to lower the compression of the engine to be able to install the turbo. I have a Mazda 3 2.5L and I am going to add a turbo to 8 psi and I wanted to know to prevent it from bursting.
@MoAlbani4 жыл бұрын
My 07 2.3 has 261,000km right now and still very strong
@ColtonRichter4 жыл бұрын
Damn, you got a tank!
@AbdulALMadhee4 жыл бұрын
Colton Richter and not a single spot of rust which these are known for
@MoAlbani4 жыл бұрын
Abdul A yes sir 🧿
@isaiah96393 жыл бұрын
Mines at 263000km and is still going strong 😂😂
@lonewanderer9583 жыл бұрын
Nice, not really suprising tho guys theres lots of people in the usa with 300,000 MILES on their stock 2.3s, people shit on the 2.3s and act suprised when their molested and unmaintained 2.3 mazda3 they bought for $800 off craigs list with no car fax blows up after 2 pulls like yo lol
@jakeburris13205 жыл бұрын
That’s one way to save yourself some cash
@ColtonRichter5 жыл бұрын
And to be different 😅
@copperkeyracing61675 жыл бұрын
How did he save some cash? The mazdaspeed3 in the background cost the other guy $5k, and puts down 260whp factory stock. The one he built with $10k canadian puts down about the same, 260-270whp. Get a mazdaspeed cold air intake from the dealer, and the mazdaspeed3 makes another 20whp, totaly of 280whp. I have both a mazdaspeed3 and a cold air intake, which is what the guy basically built for $10k, twice the money. Do it for the fun of it, not for the money.
@ColtonRichter5 жыл бұрын
Incorrect, let me rephrase this: My MazdaSpeed 3 in the background cost me $5,000, 158,000km. Stupid deal, haven't seen a cheap one like this forever. This entire build that Arseny did cost $5-6k and he's got a motor with 40,000km on it a brand new turbo kit. By the way, throw some HPFP in your Speed 3 or it's going to ZZB with your intake 🙃
@copperkeyracing61675 жыл бұрын
@@ColtonRichter Stock block and stock turbo mazdaspeed3 can do 400whp with bolt-ons and tune, I've proven it time and time again by tuning my mazdaspeed3 customers. A cold air intake is only 8% more power than the factory, which the factory knows, and designed the cold air intake and the fuel pump [and fuel pump internals] to handle that little bit more of power. The stock mazdaspeed3 fuel pump is maxxed out at 280whp, nothing less and nothing more. If you want a mazdaspeed3 completely stock, never modded, with 120k miles or less, I'll sell you one for $7k USD, as I buy and sell them. I have 3 to sell currently. As I said, turbo your 1st gen standard Mazda 3 "for the fun of it, not for the money" or as you said, 19:21, "either do this for $6, $5 grand canadian or you do what i did and buy that for $5 grand canadian." Hit me up when you need a tune, but that ebay turbo will never do 400whp, nor will most of that setup (factory clutch, factory injectors, factory fuel pump, factory stock block standard mazda3 engine, factory standard mazda3 transmission 5:58, factory brakes, ebay turbo) in the video. An engine+transmission swap and a turbo kit will never be the same as an actually mazdaspeed3, but dare to dream, and enjoy that you did it yourself. Built, not bought.
@project2ndgenspeed6723 жыл бұрын
@@copperkeyracing6167 you're right, it won't be the same, it will be better because you won't need to deal with all of the DISI problems.
@diegocorrea42235 жыл бұрын
I’m from USA I have a 2009 Mazda three auto 2.0 sedan this makes me want to make mine into a speed now
@ColtonRichter5 жыл бұрын
Start by getting a manual, or move into a Speed.
@joedimauro86975 жыл бұрын
This is sweet
@cheesegromit94235 жыл бұрын
Some idiot totaled my 2011 2.5 sport by running into it while parked a couple weeks ago.... guess it’s time to go speed3
@ColtonRichter5 жыл бұрын
😢
@HypeStars4 жыл бұрын
Hello! I have a 2017 Mazda 3 2.0L I4 Engine, I am looking for a turbo kit that fits my car. Have any suggestions??
@ColtonRichter4 жыл бұрын
Nothing available yet!
@steve02944 жыл бұрын
What turbo manifold did he use? The 2.3 log manifold?
@rockysmumakagma5 жыл бұрын
Whoa 😍
@mushu_mazda89773 жыл бұрын
I didn’t even know they made a 2.5 motor my hatch is a 2.3
@ColtonRichter3 жыл бұрын
They made the 2.5 in the 10-13, then went SkyActiv
@bricegraham82563 жыл бұрын
17:22. I really want to get that guage pod set up. For some reason that always seemed cooler to me then then piller pods on these cars
@ColtonRichter3 жыл бұрын
I do like the pillar aswell, fits awfully nice
@bricegraham82563 жыл бұрын
@@ColtonRichter I probably should have worded that sentence better. I like the gauge set up where they go over the ac vents
@ColtonRichter3 жыл бұрын
ok.... I like both 😂❤
@bricegraham82563 жыл бұрын
@@ColtonRichter I feel that. Piller pods feel more like a diesel truck thing to me
@perryj2023 күн бұрын
That looks like way too much work! I have a question: I have a dead 08 Speed3; I was wondering what years of the Ford Duratec engines are compatible with the MZR2.3; they seem to have something different in the lineage between 2009 to 2012 and 2013 to 2016 and then up. Are all years essentially the same or compatible as far as short block swaps are concerned? Are there optimal years of the 2.5 to use for the conversion?
@el-squanchi9456 Жыл бұрын
Following. What parts did you use off the 2.3? Everyone says you need parts from 2.3 and nobody wants to share what ... It's like nobody builds the 2.5. I want to boost mine bad
@Echo0243 жыл бұрын
I want this guy to take me for a ride in his car.
@adamcameron6364 Жыл бұрын
Hey that thing is in Campbell River... and up for sale. Dude is asking $4900 for it.
@ColtonRichter Жыл бұрын
I seen, I think that's the 2nd owner this year he hasn't had it long
@p90-i7r5 жыл бұрын
wouldnt it be easier and cheaper to just buy speed3?
@mazdamatt77035 жыл бұрын
p 90 nope
@ColtonRichter5 жыл бұрын
If you do the work all by yourself, possibly. But that's not fun, is it? 😉
@YaBoyDave2155 жыл бұрын
as a Mazda community member, please let this meme die its not funny anymore lol
@imokay70023 жыл бұрын
So I have a 2011 mazda 3 and I was wondering where i could find a turbo manifold that fits onto it. If there is any website or just something I could look up and find that would be so much help
@7redstripes3 жыл бұрын
Hello whats a good cold air intake to buy for my mazda 3 2.5 2010
@ColtonRichter3 жыл бұрын
All brands basically make the same thing, take a look at CarID.com.
@juancarlossam7535 Жыл бұрын
Hi mi name is Juan How did you get your computer to recognize the turbo? Or you change?
@dominicamanti29515 ай бұрын
For the shift cables he talked about using shift cables from a 2011 Mazda 3 2.5. He didn’t specify if he got the cables from the 5 speed or the 6 speed model Mazda 3 does it make a difference on what cables I get?
@ColtonRichterАй бұрын
You want the 6-Speed cables.
@neilmaccallum3476 Жыл бұрын
What downpipe/exhaust???
@legosrule1115 жыл бұрын
nice build. Any way we can get some pulls?
@juniorahlam52954 жыл бұрын
Is the windscreen cracked? 11:23? Or its just my eyes?
@ColtonRichter4 жыл бұрын
Cracked!
@joe.b57203 жыл бұрын
I have a 07 2.3 Mazda 3 with k04 mazdaspeed turbo and everything needed running super low boost like 8 psi max which rarely runs that… all stock motor and fuel system think I need a tune? Thing runs amazing doesn’t miss a beat
@joe.b57203 жыл бұрын
But I believe my boost guage is no good I can hear it and feel it building boost but guage reads -20 to 0.0 this was also around when my charge pipe blew off lol
@ColtonRichter3 жыл бұрын
Yes dude get a tune lol, your car wasn't tuned from factory to support more fuel / air / and turby
@joe.b57203 жыл бұрын
@@ColtonRichter that’s truee, not sure where to get one in Ontario there’s not many places that support the 3s but maybe the guy I bought it off does have a tune because it runs so good and the air/fuel is always spot on but i dont know
@icestormgaming93572 жыл бұрын
I have a 2012 skyactiv that I want to swap the 2.5 in since that seems easier considering this year had the 2.5 variation if I'm not mistaken. And before you ms3 lovers comment I don't like hatchbacks so I'd like the power in the sedan
@ColtonRichter2 жыл бұрын
I won't be that guy, but depending on the process of your build you would save SO much time buying a 2nd Gen sedan already with a 2.5 mated to a 6spd!
@icestormgaming93572 жыл бұрын
@@ColtonRichter well I'd like to just to do it and say I did. And it'll be a long time till I do it as my current gen 2 is lowish miles @118k
@4nunnak14 жыл бұрын
So I Can swap my 09 Mazda3 2.0 to L3 2.3 (aspirated & turbo) or 2.5? 😦 P.S: that 2.5 is it from? Nice vid!
@ColtonRichter4 жыл бұрын
Can't put a 2.3 Turbo, but 2.5 yes.
@michaelbuchanan26623 жыл бұрын
kzbin.info/www/bejne/aJzKhYxqdq6tadE
@dkis8730 Жыл бұрын
How do you tune these? I have an 04 Mazda 3 that I'm putting a 2.5 in bc my 2.3 blew. I'm not really looking to mod it, but figure I might as well get a tune if it's cheap enough to do since I'm already swapping ot
@stoyanstoyanov33283 жыл бұрын
where did you get fidanza flywheel from . I`ve cheked in their website and could not find flywheel for that particular engine ?
@ErayQforgetUАй бұрын
How long did it take to build this? Just for the turbo set up
@ColtonRichter19 күн бұрын
That depends on the person & supplies, can be done in a weekend, a week, a month...
@gtmdavid56811 ай бұрын
I have a 2011 mazda 3 sport grand touring, it is 2.5L 6 speed manual + R It has good power but I would like to increase it, do you know how many psi it supports without forging anything?
@ColtonRichter11 ай бұрын
Lots of information on forums regarding this.
@akeel25993 жыл бұрын
What’s the top speed after the tune? I turbocharged my but haven’t tuned it yet. How should I go about doing it?
@project2ndgenspeed6723 жыл бұрын
Top speed is limited by the govenor and then the gearing if the governor is removed.
@NickFine3 жыл бұрын
hey i already have a 2012 mazda 3 2.5 and was thinking of boosting it. i’m trying to find a complete kit for it but can’t so i guess i’ll have to part it out...i just can’t find everything i need
@ColtonRichter3 жыл бұрын
Check out forums, and a Facebook group for boosting it. A lot of people will be able to guide you in that direction! :)
@jeremycrothers46565 жыл бұрын
I have a 2008 mazda 3 sedan with around 230,000kms on it (143000 miles) and it has never had any major problems. Is it still worth spending money on modifications? I just don't want to spend money just for the car to die.
@ColtonRichter5 жыл бұрын
Eh, it's getting to the point where you should save and get something else. All up to you!
@79SUPERWAGON3 жыл бұрын
We are getting ready to do this on my son's car what/who did you use for the tuning??? Its a 06 Mazda 6.
@ColtonRichter3 жыл бұрын
DRTuned
@residentzach3 жыл бұрын
He stated that the swap would be harder on an 04 Mazda 3- but does that imply that it is possible? Without a drivetrain & transmission swap, that is. Interested in getting a new car as a daily driver and doing some work in my current (04 Mazda3 Sedan, 2.3). Motor needs some work, but I'm attached to the car because everything else is spotless- so why get rid of it when it can be a toy?
@ColtonRichter3 жыл бұрын
It does not imply that it's impossible, you can do this in any of the 1st & 2nd generation years (04-13)
@residentzach3 жыл бұрын
@@ColtonRichter Bet. Thanks so much for the fast reply man! I'm impressed since you seem to be such a staple in the online Mazda 3 community. Kudos to your growth by the way!
@ColtonRichter3 жыл бұрын
Thanks brother!
@santijaos4 жыл бұрын
How do you tune de ECU..?
@lonewanderer9584 жыл бұрын
Take it to a tuner
@solderbuff Жыл бұрын
This guy bought the entire engine for 1200 CAD while it cost me to repair mine in a shop as much...and there was nothing major to fix 😂
@ColtonRichterАй бұрын
Good ol' maintenance hahah
@sebastianmuskovic89453 жыл бұрын
Hi Colton ,I have a 06 mz3 with a blown 2.3 in it and am ready to pick up a 2.5 duratec from a ford fusion. Could you see if Arseny knows whether or not the 2.5l motor from a 2013-2016 fusion works? Considering they are still Duratec and not ecoboost motors. I'm seeing guys use motors from 2010-2012 fords and up to 2011 mazdas all the time but cant find anything on the 2013-2016 ford motor. Thanks man
@ColtonRichter3 жыл бұрын
Have a read through forums or DM him, there's also Facebook groups that are all about the 2.5 swaps!
@SeekingSuccess222 жыл бұрын
Is there any way you can get me the paint code for that color? I would much appreciate it
@wrst33142 жыл бұрын
I’m pretty sure it’s copper red mica, 32v is the code.
@cssls31354 жыл бұрын
I have a 2010 Mazda 3 Hatch 2.5L stock with a K&N intake. What could I do to boost power besides a tune?
@ColtonRichter4 жыл бұрын
Not much, would be more value into putting a turbo into it then spending money into things that wouldn't give you much from the start
@shanemcdonald63323 жыл бұрын
Wonder if I could put a 2.5 in my 08 sedan
@ColtonRichter3 жыл бұрын
You can, yes.
@joelfuentes51485 жыл бұрын
I can't find the turbo manifold on eBay. Is it a generic one that you modified?
@devonbrittin16265 жыл бұрын
Joel Fuentes take a look at a 1st gen speed3 factory turbo manifold
@TomasGSangoy4 жыл бұрын
Ford Focus 2.3L cast iron turbo manifold. You can find them on eBay and Amazon
@TomasGSangoy4 жыл бұрын
Same bolt pattern as a Mazda 2.3 & 2.5
@joelfuentes51484 жыл бұрын
@@TomasGSangoy Thanks!
@caseyrutledge51685 жыл бұрын
I have a 2009 auto 3 and want to get more torque out of the NA 2.3. Any tips? Also I am considering swaybars and subframe bracing.
@Dossantos09095 жыл бұрын
Casey Rutledge get a speed3
@caseyrutledge51685 жыл бұрын
@@Dossantos0909 my neighbors have a 2014 speed3 thats just setting in their driveway because they bought 2 new Toyota vehicles and left the poor mazda behind. Ive been thing about leaving them a note asking if they wanna sell
@Dossantos09095 жыл бұрын
Casey Rutledge 2013? There are no 3rd gen speeds. I have a 2007 gen 1 speed and it’s so much fun
@caseyrutledge51685 жыл бұрын
@@Dossantos0909 thats what i meant to type
@ColtonRichter5 жыл бұрын
Get a manual, that's your first step for more torque. Other than that, get something faster.
@ditiromodisane690711 ай бұрын
Where do you guys buy these 2.5 engines for a fair price?
@ColtonRichter11 ай бұрын
Wrecker
@DUNELIZARd72 жыл бұрын
Koo car wanting do this to my Mazda 5
@afx31_4 жыл бұрын
This is pretty cool and unique I must say! I have a Mazda 6 GH wagon 2011 which I was thinking of boosting as well for the fun of it, already a 2.5L... And now I've seen this vid. I just had 2 queries, is the log manifold for a speed3 BK or BL ? And what happened in regards to the ECU all I heard was stock, hows he controlling the boost etc. Cheers!
@afx31_3 жыл бұрын
Bump on this?
@zr94303 жыл бұрын
hi do you change the computer ?
@connorfarrow451 Жыл бұрын
What tuning software did u use
@ColtonRichter Жыл бұрын
Done by DRTuned
@dionleblanc51904 жыл бұрын
What axles did you use
@jdmbacon2 жыл бұрын
Lmao I know that area...this is what I aim to do with my 2011
@zacharynoragon40303 жыл бұрын
Stock fuel injectors on a turbo?
@project2ndgenspeed6723 жыл бұрын
You need to upgrade them.
@jungeezy3 жыл бұрын
Depending on the psi you’re pushing you’ll need to upgrade them a good amount. I read some members are using 2000cc injectors to push 16+psi
@project2ndgenspeed6723 жыл бұрын
@@jungeezy for the 2.5 550cc injectors are more than enough for the stock block. 1000-2000cc would be for much more power, like more power than the stock 2.5 sleeves can handle. I know of maybe 1 or 2 people with that much power.
@declanmcalister46812 жыл бұрын
I’ve got a 2014 Mazda 3 sp with a stock 2.5l 5 cylinder producing 185. The car’s bone stock but was thinking of paying someone to slap a turbo on her. What do you recommend doing first so she’ll be able to handle the power?
@ColtonRichter2 жыл бұрын
It`ll handle it, if it`s a manual. Check up on some forums, it's a heavily supported topic.
@declanmcalister46812 жыл бұрын
@@ColtonRichter It is a 6 speed manual, will do. Cheers
@saltywip Жыл бұрын
would it be possible to do an auto to a 6spd manual swap? and would it require any ecu updates?
@ColtonRichter Жыл бұрын
Would need a manual ECU, but yes you can do the swap
@mazdamatt77035 жыл бұрын
Why wouldn’t the speed cables work for you?
@ColtonRichter5 жыл бұрын
He explains that 2nd gear wouldn't go in, and would stop before getting into gear
@EvlEgle4 жыл бұрын
A narrowband is pointless for tuning
@SailingFrolic4 жыл бұрын
I wanna turbo my 2.5 on my 2018 3, but I have the skyactiv and high compression + turbo means nightmare to tune.
@ColtonRichter4 жыл бұрын
Well, think about the Skyactiv 2.5T that's in the CX9's, CX5's and Mazda 6's!
@reinelcampa78714 жыл бұрын
Mazda 3 2018 2.5 Gt come with turbocharged ready cause I have one
@SailingFrolic4 жыл бұрын
@@reinelcampa7871 what do you mean with turbocharged ready? I own a 2018 2.5 GT and it's not turboed from factory. Do you mean that it comes ready for turbo from factory?
@SailingFrolic4 жыл бұрын
@@ColtonRichter Yes! In fact, I inquired the dealership what would the process be to get a quote for installation of those parts. They haven't a clue themselves. Yes, Mazda makes them, but with a variable pressure turbo that has a relief valve in the turbo inlet at low RPM to stifle airflow (and thus reduce overboost and lag at low speeds). Unless I source one of those from a wrecked Mazda as well as necessary wiring and electronics, it will be damn near impossible to replicate a 2.5T setup in my 3. It's kinda complex, but I'd love to be the first to get it done.
@reinelcampa78714 жыл бұрын
MTB Wolf well my mines and I have proof. Sale told me it was turbocharged and it said on the paper of car
@kavikakuz49302 жыл бұрын
So I have a 2005 2.0L Mazda 3 BK Hatchback and I’m planning to put a 2012 2.5L Mazda 3 SP 25 BL Hatchback engine in it. Is it a possible conversion or waste of time?
@ColtonRichter2 жыл бұрын
Worth it!
@kavikakuz49302 жыл бұрын
@@ColtonRichter thanks mate 🤟🏾
@מוחמדכבהה-ה6כ3 жыл бұрын
how can i turbo my 2009 mazda 6 sedan 2.5L dohc 16v??
@ColtonRichter3 жыл бұрын
Check out some forums and Facebook groups!
@owenbond16444 жыл бұрын
How did you side mount your plate???
@ColtonRichter4 жыл бұрын
Towhook license plate adapter, can find them on eBay & Amazon
@Castiel_Pr5 жыл бұрын
👍🏻
@KevinRamirez-ll4px5 жыл бұрын
How did you get to tune the computer? I have practically the same mounted unlike the engine that mine is 2.3 and the transmission that is 5 changes. my mazda has problems in the setting so far I have been able to get 220 horses but the mixture goes crazy after 5 rpm and dries. I would like to know how you managed to set it?
@team64745 жыл бұрын
Kevin Ramirez You made 220hp in a 2.3L?
@KevinRamirez-ll4px5 жыл бұрын
@@team6474 yes i have 220hp but The mixture ir crazy after 5 rpm.
@yaboinellz08045 жыл бұрын
What do u have done to yours I have a 05 Mazda 3 2.3 to an also can u upload a video of your car?
@jwavy561style34 жыл бұрын
How much did it cost to turbo the car all together
@ColtonRichter4 жыл бұрын
I think he said around $5g
@scottlathrop664 жыл бұрын
Or.......You could just buy a regular Speed 3 that already puts out 260 HP, then get a custom tune to get over 300. I love the engineering aspect, but the ends hardly justify the means.
@ColtonRichter4 жыл бұрын
It's about making a project and being creative, instead of buying something that is basically already made for you