Compact PET Filament Machine in Operation

[@alexl5144]

It's the best model of PET Machine, that I found on youtube. Thank you, sir!

[@williamsn.j.3611]

ESSE PROJETO FICOU ESPETACULAR. MUITO BEM ELABORADO

[@andersoncosta7626]

Excellent project. Congratulations on the initiative to share your knowledge. I'll try to reproduce it from here in Brazil. Do you have a video with step-by-step assembly?

[@ИгорьЛушников-с9и]

Отличная работа.👍👌

[@Vanilla2206]

Pode ser impresso em PLA?

[@zahraamyy]

thanks for this. Please explain about the temperature settings❤

[@ivanleonlopez7411]

Buenas noches, ¿qué temperatura utilizas? ¿Seme me para el motor al llevar un rato funcionando? Alguna ayuda. gracias

[@Burnt...Steppe]

AWWW, шевронная передача )))

[@cen1908]

É uma das melhores que já vi. Parabéns...

[@krzysztofandruczyk5604]

Jaka jest grubość ? Rozbudowujesz ten projekt dalej czy to już koniec budowy?

[@cadummoraes]

Have you ever tried to use 2 4mm filament instead 1 8mm filament? I mean, using 2 4mm filament it would be possible to produce a twice long filament. It would reduce the amount of junction.

[@angieuesselerc]

Thank you so much for this video explanation 👏🏻👏🏻🙏🏻

[@jeanmarcPrizzon]

The best !

[@Nocopyrighthdvideos]

Hey man love this machine i want to make one of my own but i dont have the resorses to build it can you help me

[@Fus-1111]

Hi, thanks, Wellington donne. How about the cost ?

[@kodexmx5569]

Hi, thanks for gut Project. Can you tell me: I bought a 10 rpm motor, will this be a problem?

[@miroslavbatek]

No I will not be a problem, 10 rpm motor works as well.

[@kodexmx5569]

Thank for Projekt again.

[@Erosgenuino]

Hola, ¿como saca el carrete una vez que finaliza?, le pondría una tuerca abre fácil al eje del carrete como las que llevan las bicicletas plegables.

[@ericlamihaul3826]

Bonjour, belle machine j'ai commandé les pièces et impression en cours, pouvez vous me dire quel est le largeur du ruban PET. Merci

[@christiangirodet7606]

Bonjour ! Incroyable ! Vous ne montrez absolument pas la partie la plus intéressante et principale, c'est un comble ! En tant qu'ancien professeur de mécanique de la vieille école, je suis profondément déçu ! Un zoom cette partie est absolument nécessaire. Un peu de pédagogie SVP ! Salutations.

[@roadVlogg]

GENIAL...👍

[@AronGamer]

I have a problem with the machine, if I configure the thermo to 215 ºC for example it fluctuates, it goes to 222 ºC and then turns off for a couple of seconds, and whenever it reaches smth below 210 ºC it turns on again, and with this our plastic becomes fragile and the motor doesn't have enought torque. Is there anything electrical we could do, or any recommendation from you? Ty very much.

[@miroslavbatek]

Press and hold SET to enter the parameter setting option. Set the parameter P01 to 0. This will decrease the hysteresis and it should help. I don't know if you have exatly the same heatblock and holder. but in general bigger heatblock will help for temperature stability. You can also set the temperature a little bit higher so it will oscilate arround temperatures when the material will be still soft.

[@josecruzado1194]

Yo instale un ventilador de enfriamiento apuntando a la boquilla con un regulador de velocidad. Debes encontrar la velocidad del ventilador para que enfríe la boquilla cuando se interrumpa el calentamiento, de esta forma la temperatura de la boquilla llegara a la deseada sin mucha fluctuación.

[@7md_net]

Can u tell me the wiring circut or make a image for wiring pleas

[@miroslavbatek]

www.printables.com/model/460950-compact-pet-filament-machine

[@just2716]

What the strip size? 5mm? 6mm? 7mm?

[@miroslavbatek]

6mm - 12mm depends on the bootle thickess.

[@just2716]

@@miroslavbatek thank you kind sir

[@jeanlouismeyer9974]

What is the thickness of pet 6/8 where 10mm thank you😏

[@henry1285]

which filament shuold i use to print this?

[@miroslavbatek]

PETG would be ideal

[@henry1285]

@@miroslavbatek thank you so much for awesome project.

[@nikyprint3d]

Hi, I'm also starting to get closer to this world but I have a problem which is that I don't know how to join the filaments produced by each bottle, I saw a machine on KZbin called slunaz ff1r, whose function is to join the pieces of filament, but I don't know how it can be, has anyone tried it?

[@joannibarguen]

Quiero contactarme contigo por favor necesito que me vendas dos unidades

[@jirisachl4220]

Pěkné. Super. Gratuluji. Jen otázka : Na kterých tiskárnách pak tisknete s vyrobenými filamenty? Nedovedu si představit, že bych tento filament cpal do tiskárny za 45000,- Kč. Sračku do sračky!

[@negrelli]

like