Comparison between Lightning OTF, Microtech UTX-85 and Microtech UTX-70

[@maybefrank8345]

Hey…THANK YOU. Cant believe how hard it’s been to get a real life idea of how big/small the UTX70 was. Really appreciate the practical information!

[@bf3949]

A “carpenter’s pencil” and a “Hotwheels/ Matchbox car” are perfectly relatable metrics of comparison easily found laying around. Well done; I like where your heads at.

[@CastilloinaSpeedo]

Also Bic lighters! The 85 is about the same circumference and about an inch longer.

[@haruncolak9531]

@@CastilloinaSpeedo 8893b99

[@JDBeastmode]

I purchased my first real OTF knife and I chose the Heretic Manticore x and I’m loving it

[@firewaterforgeofarizona4304]

Love my lightning! Cheap, reliable and the blade holds a great edge.

[@cars9886]

Firewater Forge of Arizona same man!

[@martylucas8557]

I’ve had my red Lightning, made in Taiwan, for about 6 years. It has never failed me! It has great action. It will be the best $19.99-$35.00 you’ve ever spent!

[@CaptDavesSportfishing]

Me too! Sold all Microtechs I had. Always mis-firing. Both cut. And I have a wicked edge sharpener, EZ, to keep sharp.

[@ChrisM-mu8rc]

This was very helpful! I should be getting the lightning in a couple of days. I am already looking at the microtech.

[@raymondwilliams2609]

Really great video, probably the best one I've ever seen!! I enjoyed it immensely, and I really hope you do some more; you're very adept at it! Thank you for the information! ☺️👋🔪

[@TheJimicus]

I've been looking at a microtech but the warranty gives me pause. I can't sharpen the knife without voiding the warranty? That seems a bit extreme.

[@thertis580]

Not very keen on the glassbreaker. In many cases I find the knife base against the palm of my hand. Same with other knives with pointy handles.

[@jseden]

Just got me a 70 in single edge/bronze after a couple months with a mega cheapie tester otf. I like the size and it’s fine for what I usually need a knife for. Might I get a larger one later? Perhaps.. but I’ve owned many small knives, spyderco dragonflies, sak minis, ect and never felt like I needed more. I’ve also owned larger and never felt much of an advantage. Although larger does feel a little nicer.

[@kevinsong712]

Exactly what I wanted! Wants the UTX70 but could only afford the Lightening. Thanks for the vid

[@ugoleftillgorite]

Kevin Song Glad it helped you out!

[@kevinsong712]

@@ugoleftillgorite 1 Year update: I got a microtech clone bc I can't ship a lightning to my place lol

[@ColdStoneRacing]

@@kevinsong712 Which clone did you get?

[@kevinsong712]

@@ColdStoneRacing exocet, 2in blade is easier with the law

[@ColdStoneRacing]

Eww.

[@BradK9Drake726]

I have a lightning otf as a starter otf and I'm having a good time with it and wanted to get something good but not as expensive as a microtec and I found a company called cobratec that makes otf knifes that look like they are well made and they feel nice in hand as well, the olny problem I have with microtecs warranty is that I can't sharpen it myself or take it apart to clean it, not sure how good they're customers service is

[@JDBeastmode]

BradK9Drake 726 I’ll get a lot of flak for saying this but you can find Chinese microtecs for 10% cost that function 100% with decent quality.

[@servantapashia7724]

Jonathan D really? link please..

[@bigboichance3586]

M PATH Check out dh gate

[@kingofthenighttimeworldkin4954]

for a step up from a Lightning, im going to try the AKC F16....an Italian!...for around $15 extra...the $250 price point is crazy...id be too afaid to ever take it out of the house, much less carry it in my pocket, where my keys may scratch it....thats not EDC to me!!!!!

[@staticfrequency2250]

@bradk9drake726 I looooove my Cobratec

[@jkstdstang]

Great video! I own a lightning as well as the benchmade 530. I am currently looking at the UTX 85 and the Ultratech. I did look at the UTX 70 but was suspecting it is too small which you did confirm w a nice comparison with the carpenters pencil! My buddy owns an Ultratech so I was lucky enough to be able to handle one in person and I think I am leaning towards that but the UTX 85 is probably big enough also in my opinion maybe just depends which one I get a good deal on. Very informative and helpful. thanks!

[@ugoleftillgorite]

chris doyle Glad it helped! I couldn’t believe how tiny that UTX 70 was in person.

[@eric_in_florida]

The Lightning "Elite" is only $10 more and a great cheap OTF.

[@jackdaniels7913]

The carpenter pencil comparison is amazing! Exactly what I was looking for I just wish you spent a little more time comparing the 70 to the 85 size wise I was looking hard at the 70 to replace my little EDC that's getting shorter and shorter every year I want something small but is the 70 to small or just right... think I'm leaning 85 but ... small is good and discreet... ahhhhh so many questions answered so many not lol thanks for the vid it really is a help (kinda) 🤯😉 🥃cheers🍻

[@金名-e8k]

For microtech OTF series knives, do I have to use anti rust oil every time if the knife gets dirty or if water gets into the handle after washing the knife after cutting fruit? Thank you.

[@chuckthesham5195]

I have both a Lightning OTF and a Microtech Ultratech blue OTF. I liked the Lightning well enough until it broke. Something gave on one of the springs and the blade just hangs loose, falls out with gravity, falls back in with gravity. I have seen reviews of the Lightning that were very positive, with one guy saying that he used it as his primary EDC for two or three years and it still works. I might have just been unlucky enough to get a defective knife. I had it for about six months and it wasn't subjected to hard use at all, not even when it broke. Sooo, I guess I got what I paid for. I'm sure that Microtech would not let a defective knife leave their facility to be sold. I love the Ultra. I really did enjoy the Lightning while it lasted. I already took it apart to see what went wrong, so far no luck. I figure I can't make it any worse, so I might as well try to learn something about the innards of an OTF.

[@jerrybryant5679]

Have you tried “resetting” the mechanism with a flick of the wrist? I’ve been able to do that with mine with good luck. I hope this helps.

[@mountaindont34ify]

Yours isnt broken man.. you just need to pull the blade out all the way until it clicks is back into place or resets

[@kawi4ev]

EZ-PZ no bro. Mine broke as well.

[@CharlesWBevan]

To fix the springy noise just open the knife and put a small dab of grease on the spring. After you close it back up the springy noise will be gone.

[@jakeroark570]

Cool knifes micro tech makes good blades great knifes to carry they fell nice in the hand to for a good work knife I been carrying a Kershaw Emerson with the pocket hook and first I hated it and then I realized how to work the hook for opening it wow it really works great.thanks for the video and hope u enjoy you new edc.

[@mendivil71]

The lightning OTF is the best day to day knife you can use on a daily. I can't see myself using a Microtech knife 2 open up boxes, cutting through wire ties, cutting through plastic shipping straps, prying off huge Staples that hold together cardboard boxes, cutting up cardboard boxes to break them down and put in a compactor. The Microtech is primarily pocket jewelry. It's something you can brag about to your friends, but trust me they would be just as impressed if you showed them the lightning OTF, Cuz it's the knife that will get the job done I own three of them and my oldest one is 3 years old and works just as good as the others. Just buy yourself 11 lightning OTF's and hand them out for Christmas if you want to spend $225 and you'll be a better man for it trust me.

[@servantapashia7724]

Tin Tin71 how long does the lighting stay sharp would you say? daily use probably for a outdoor knife, gutting fish, n small critters or maybe possibly a deer?

[@mendivil71]

@@servantapashia7724 on a 45 grind holds it sharpness for a full month with hard use. Tried a finer edge and found it rolling the edge to easily.

[@valenteleanos4774]

Tin Tin71 I have numerous lightnings and microtechs and I use the Utx-85 all day to cut down boxes and do most everything you said you use your lightning for. I understand what your saying and I get it, but because most people dont use their expensive knives to EDC doesnt mean thats not what it was meant for. Microtechs by far will out perform a lightning in longevity as well as blade retention and toughness. People just have to bring themselves to actually use their shit LOL

[@donaldcooper4330]

Why wouldn't you use a microtech to work with, they can take it

[@mendivil71]

@@donaldcooper4330 I'm not saying they can't take it Donald, I'm just saying that's a lot of money to use to beat up on a knife. I can see it more as a survivalist tool other than a day-to-day knife because as a survivalist when you're out 45 days at a time living out in the wilderness you need something that you can depend on I'm sure the lightning can do it but then again microtex steel is a lot stronger I'm thinking it can probably take more punishment.

[@bodean2000]

I just received a Microtech UTX-85 and was surprised at the amount of slop rattle in the eject button, Is this the case with your Microtechs or are they somewhat tight? I don't think a $200+ knife should have any rattle or play.

[@mcj5644]

Nice blades and comparison video, man! ⚔️😎👍

[@chuckfinly9559]

I never realized how small the UTX-70 was, that's insane.

[@darrellbaker8334]

I have both the utx-70 with the hellhound blade, and the utx-85 purple with the s/e black blade. Both knives are awesome fricken knives. I actually had the lightning too, but I just didn't like how heavy it was. Ended up giving it as a gift.

[@kingofthenighttimeworldkin4954]

I also love my Lightning...do urself a solid and check out a Titan..same pricepoint as the Lightning, but has a glassbreaker and the sandpaper type inlay...both make excellent EDC...DA, OTF...and they make great gifts at a gift price!!!... Microtech has some big competition.....

[@wis1024]

Lightning isnt one of the cheapest otfs but it is the best cheap one you can get. There's a lot of super cheap otfs that arnt even worth looking at

[@dmctalon7262]

Wanna sell the utx 70 if you still have it?

[@CastilloinaSpeedo]

I had the same issue buying my first one. I went with the 85 but got the regular utx shortly after. Honestly I prefer the bigger knife but they're both great. Now I want the Combat Troodon but there is no way in hell I'm paying as much for a knife as a glock! I'm looking at Cobratec Vs1 instead, 124 bucks and they look identical.

[@Microfiber_Muncher]

I would be wary with the cobratecs they are mostly overpriced clones you can find on other sites for half the price, plus the quality of a cobratec is not very good.

[@CastilloinaSpeedo]

@@Microfiber_Muncher I'll give you a one year later update. I bought the cobratech. The utx 85 broke a lock and the spring. The factory fixed everything but I sold it shortly after I got it back. From owning the cobratech I realized that the Combat Troodon size was too large for me. I bought another couple Ultratechs which seem to be my favorite Microtech design. Without getting into source of manufacture debates and the ethics of buying clones, I have to say the cobratech is a good value for the money. Mine never needs to be oiled, has never failed to fire, fires as easy as the Ultratech (I hear the C. Troodon's trigger can be more difficult to actuate), and the trigger button doesn't rattle around like the Microtechs do. I'd probably have been happier spending 80-100 on the cobratech from a secondary vender at a gun show or someplace like that but 125 still ain't bad for a piece that basically acted as a demo knife. I'm glad I didn't spend nearly $500 to find out I didn't like the Combat Troodon.

[@Microfiber_Muncher]

@@CastilloinaSpeedo yeah the Combat Troodon also has a very rattly actuator switch.

[@---nw9qu]

Good review and comparison.

[@stanfordschroder1980]

The head on your shoulders is screwed on just right. Fantastic scales

[@zipzip8239]

sharpening voids the warrenty? i'll stick with cheap clones.

[@joehouchens1675]

can you change blades in the lightning knife otf

[@hphillips7425]

The problem with microtech is when you purchase one you will want another one

[@jagpilotohio]

H Phillips lord help us! Lol! I just got an 85 three weeks ago and I’ve officially got the bug. I’m looking for new options and blade styles every few days. I never imagined I’d be happy to spend well over $200 for a pocket knife.....until I finally did.

[@hphillips7425]

scott h 👍🏻 I agree this was my first high dollar quality knife I ever purchased. I have a socom elite manual on the way. If you are first responders military or law enforcement you get a good discount.

[@bensharp8289]

Good video but I have one question. How long have you had the MicroTech? It seems like you have had the Lightning for a long time and it has been used WAY more than the MicroTech. If that's the case, the comparison is flawed. Most any knife that is new and out of the box will have tighter lockup and overall be much sturdier than one that's been well loved. At least that's my experience. Nice video, though.

[@ugoleftillgorite]

That's a fair point. I would agree with you on many knife designs, but some naturally compensate for wear-in. The Benchmade Axis lock comes to mind. I have had the Microtech for months now and I cannot detect any change in the lockup. If that changes I will annotate the video.

[@CarlAquaForce]

I wish I could find one for 225.00

[@TheMillieSmalls]

Except for coming out the front, how can you possibly say “the lightning is clearly a knockoff of the Microtech”? Half inch blade length difference, wider body, different gimping, different body shape, one top is sloped and the other isn’t, one pocket clip is off center and the other isn’t, etc etc. one is a cheap Otf and one is a top tier Otf, but they certainly weren’t trying to make a copy/clone. what a wild thing to assert.

[@backwoodsfreak]

Ive carried the lightning otf for about 10 years now and im on my second one. First one consequently my wife knocked into garbage and got burned in the burning barrel. When i finally found it, the body was melted and warped. However the blade and all the hardware inside was immaculate after cleaning it up i swapped out all burnt hardware in my new knife including blade and pocket clip and she still lives on today. Honestly think it holds better edge now than before. Carbon? Id rather have a case of these than spend the same money on a microtech. Just make sure when you buy a lightning you are getting the taiwan made lightning microtech knockoff as it is superior to the slimmer (more authentic in look but dont be fooled, the springs/hardware are trash) china version by a mile.

[@5shotsr611]

204p is a great steel. M390 is little better. Elmax is good too But lower level steel it is good though. My favorite is m390 ,so far 👍

[@dmw3086]

I own a ultra tech and I don’t understand why they want you to send it in for sharpening. You aren’t messing with the mechanics of the knife and There are some people who themselves can put a better edge on a knife than the folks at microtech other than that love the ultratech

[@allemander]

Is that even true about MT requiring users to pay to send it to them just for sharpening? That’s absurd and could become a weekly need for some heavy users. The darn thing would spend more time in shipping than in its owner’s hands! Crazy!

[@matthewc4025]

It’s not true. It’s “suggested”. Doesn’t void warranty if you sharpen

[@CaptDavesSportfishing]

Dagger blades are USELESS, for EDC. 1st mistake. That Lightning will be more dependable! Not loose, just the 2 springs. Versus 1 spring on Lightning elite model. Learn to sharpen!

[@dmg12345678]

Utx 70 a bit too small. They should make a utx78. Lol

[@christianhaykus452]

Utx 71 lmao

[@evilnineteen]

This is like comparing a ford escort to a Lamborghini. Lol

[@HalfInsaneOutdoorGuy]

34,000 views, 160 subs…this is the problem with KZbin…and it’s a very liberal idiot run company…let’s go Brandon!

[@fomocore]

Lightning knives or Superior. Microtech caters to government only. They do not servicer knives. You've been warned

[@KB-kw8ni]

Incorrect

[@joshronalds5112]

You are stupid

[@boyhowdy5893]

I'm sorry, I own otf knives and like them I'm just saying!

[@tomcostanzo6380]

A

[@boyhowdy5893]

Just my opinion but I think OTF knives are way over priced and a rip off!

[@Jeepsteve1982]

Get an ultratech for the fun factor and it will change your mind.

[@JDBeastmode]

Kevin B they’re the least reliable knives and I wouldn’t put my life on them ever no matter who makes them. Understanding that and they’re worth the money to me still.

[@boyhowdy5893]

@@JDBeastmode I agree!

[@TKO593]

Kevin B I own 5 Microtech OTF knives and it was like Pringles. The price of my troodon signature series with a Damascus double edge blade didn’t outweigh the joy I get out of owning one. Ask yourself Kevin; are you a knife guy?

[@KB-kw8ni]

Wrong

[@nathanprather6006]

If you don’t want that utx 70 you can send it to me

[@hossman8499]

Lightning is a knockoff of a Scarab btw....