1 in the morning and you upload a video. Looks like I'm staying up longer
@BradleyPhillipsYT5 жыл бұрын
Sorry to keep you up, hehe.
@SegwayBossk5 жыл бұрын
@@BradleyPhillipsYT Your review of the Talon will help me sleep lol
@throatwarblermangrove20775 жыл бұрын
Note to self: Practice performing back-flips into cover. I recently picked up 3 of the Talons.....can't wait to try them out in my Prophecy (once I have time to assemble it). Great job on comparing the 2.
@hiphip48085 жыл бұрын
I bougjt 2 Talons for me Caliburn
@Stryker52605 жыл бұрын
Awesome to hear the Talons work well. I was considering getting a set of Katanas for my Caliburn, but the Talon's price and actual availability sealed the deal. Thanks for the quick, straight to the point review.
@BradleyPhillipsYT5 жыл бұрын
Glad you liked the review, I try to keep them brief and to the point. Did you get the new magwell for Caliburn which takes Talon or do you plan to just use Worker's adapter?
@Stryker52605 жыл бұрын
@@BradleyPhillipsYT To be honest your mention of the magwell was the first I've heard so I'll definitely be looking into it.
@mainstay.5 жыл бұрын
I found the Talon adaptor very tight in thr Caliburn magwell, and took some pying to get out. It fitted perfectly in a Longshot and an Xzues. So i may go with Slugs magwell that accepts both.
@J43Pr0t05 жыл бұрын
Sad that i received my katanas a month before the announcement of talons, otherwise i would've bought talons hands down. Cost, build, and the fact that your product arrives quickly rather than waiting months or even years is a far better selling point
@BradleyPhillipsYT5 жыл бұрын
Might be able to sell the Katanas and change to Talon.
@J43Pr0t05 жыл бұрын
Considered it, but after everyone at my locals sold theirs off for low prices it doesn't make it as desirable to sell. Better off to have both
@ericconnors70525 жыл бұрын
You say that Katana mags are not compatible with Worker breaches without a specialty designed after-market forward adapter. I have this problem. What is this forward adapter and how does one procure it? Thank you for another excellent review.
@BradleyPhillipsYT5 жыл бұрын
They're 3D printed and obtainable from people like CreatewithEzekiel on Etsy. My latest video shows them.
@drewbenson35585 жыл бұрын
Another greatly appreciated informative vid. Thanks for this.
@homelee6655 жыл бұрын
Good video. It is nice to see a full comparison of these mags. I now have 5 of each, so I haven't fully bought into either ecosystem. However, I'm hoping to catch some people selling out their Katanas to pick some up cheap.
@BradleyPhillipsYT5 жыл бұрын
Which do you prefer?
@homelee6655 жыл бұрын
I haven't ran either in a game, but I lean a bit towards Katana. Mostly because of 3D printed options like the Vorpals that give flexibility on capacity. Although I'm sure that there will probably be Talon knockoffs soon enough.
@cobbabuilds5 жыл бұрын
Annnnnnnd you beat me, god damn it.
@BradleyPhillipsYT5 жыл бұрын
Haha, were you planning on doing the same video? I thought you really liked your new katanas.
@cobbabuilds5 жыл бұрын
My mate bought some and keep them at mine, so no brainer really. I’m staying with kmags as I have already bought in to the eco system.
@BradleyPhillipsYT5 жыл бұрын
If you didn't have the katana already, which magazines would you go with now?
@danielp42064 жыл бұрын
Link to mag pouches? Are they just Airsoft pistol mags?
@gotloveforall012 жыл бұрын
Late to the party. Do you have a name or link to the pistol mag pouch?
@Aralluen4 жыл бұрын
Where did you purchase the elastic mag holders you featured in this video?
@BradleyPhillipsYT4 жыл бұрын
I got them off eBay from searching Soft Shell Mag Pouch
@pBmauvv3 жыл бұрын
A bit late but will the worker talon mags fit in the kriss vector kit?
@J4Tie4 жыл бұрын
Can you link us where you got the mag pouches from? They're really nice
@ginsu855 жыл бұрын
There are other alternatives that are a lot Cheaper then Katana Mags but still work with Katana Mag Wells as well. This includes 3D print Magazines (I'm saying this because of the designs for two of Mr. Heath Pant's Designs that use the Katana Mags and the worker mags done work with his mag wells.
@benrussell9175 жыл бұрын
Did you carbon wrap the Ceda's pump arms? How's the clearance where they enter the shell - enough it's not scratching the wrap?
@BradleyPhillipsYT5 жыл бұрын
I've had it wrapped for a while now and it hasn't scratched the wrap.
@blockprime30064 жыл бұрын
Awesome thanks
@gabecollins55853 жыл бұрын
Will any of the adapters with a talon mag work for a unmodded rapidstrike?
@austinchristmas6033 Жыл бұрын
No because the dart pusher is too short for half darts anyway.
@hiphip48085 жыл бұрын
I bought talons for my Caliburn, Bradley do you think you will purchase a Caliburn?
@BradleyPhillipsYT5 жыл бұрын
Technically I already have purchased one, it's being built.
@zachkostechka36735 жыл бұрын
Only downside of Talons is that they can't be used in things like the Pigeon or other homemade blasters. Have you given any thought to obtaining a few 3d printed Katana-compatible mags, like Vorpals? They seem to have some of the advantages of Talons, while still being backwards compatible.
@Boomtendo4tw5 жыл бұрын
the nice thing about 3D printing is you can always change the file and adapt.
@BradleyPhillipsYT5 жыл бұрын
True what Boomtendo said. Pretty sure I have already seen a Caliburn magwell for Talon, other designers could always update their designs too.
@nerfmodsforbeginners7965 жыл бұрын
Great balanced review
@jamesmonahan12944 жыл бұрын
Can you link the mag pouches?
@melthomas97055 жыл бұрын
Thanks!
@deltatrooper6535 жыл бұрын
I think u forgot to mention one advantage katana has over talon, and that it has the dry fire prevention unlike talon. I still think talon is worth more for the price though :D
@BradleyPhillipsYT5 жыл бұрын
True, Katana does have that if you remove the tabs. I wonder how long it will be before someone 3D prints a new follower for Talons with that functionality.
@babushkakyd56185 жыл бұрын
Do you have a link to the type of pistol mag holders you use?
@BradleyPhillipsYT5 жыл бұрын
Search for "soft shell mag pouch" on eBay.
@babushkakyd56185 жыл бұрын
@@BradleyPhillipsYT Thank you :)
@Bikerscout15994 жыл бұрын
Very late to the party. What kind of mag holder do you use?
@BradleyPhillipsYT4 жыл бұрын
Soft shell pistol mag pouches, you can find them on Amazon or eBay
@Bikerscout15994 жыл бұрын
@@BradleyPhillipsYT thanks for getting back
@ChungyCheese5 жыл бұрын
Nice video Also have. You ever made a brass breech
@BradleyPhillipsYT5 жыл бұрын
I've used brass breeches before in my past videos. Did you have a question about making one?
@ChungyCheese5 жыл бұрын
@@BradleyPhillipsYT nah I've made one just wanted to know if you've made one
@mannyfresh10874 жыл бұрын
My CEDA came with the katana mags I bought a talon and it always jams
@isaaclee19643 жыл бұрын
the $30 shipping fee from monkeemods is whats ridiculous :( lol RIP, ill have to wait for a bigger order i need from em to buy
@wolfygames24504 жыл бұрын
Your channel is the best nerf channel How do you only 6 k subs
@BradleyPhillipsYT4 жыл бұрын
Significantly newer than most other Nerf channels.
@parkercurtis99975 жыл бұрын
Do you need to mod a styfe to shoot talons with the adapter
@BradleyPhillipsYT5 жыл бұрын
Yeah, you'll need an extended pusher
@parkercurtis99975 жыл бұрын
@@BradleyPhillipsYT k
@metanoba40995 жыл бұрын
Make a video about that super nice xzeus
@BradleyPhillipsYT5 жыл бұрын
It's in my Omega Kit overview
@3dbird1063 жыл бұрын
Lol, me scours internet for video about talon mags... 10 minutes later: Find's Bradley Phillip's video.... "Oh I should've known!"
@eveangreen18713 жыл бұрын
Oooor you can get 3 adventure for pro 12 round stick mags for 30😎
@mechanical_eyes1273 жыл бұрын
Half Dart Magazines are like WW2 submachine gun magazines
@hiphip48085 жыл бұрын
I thought you were gone forever
@BradleyPhillipsYT5 жыл бұрын
Back home for two days before heading out again for new years. :P