Complete Disassembly & Assembly of PURE D8.2 Silence PD82-4MB Electrolux Vacuum Cleaner

Whole process of how to disassemble & assemble vacuum cleaner Electrolux Pure D8.2 PD82-4MB. Motor is clogged with dirt - how to open PureD8 vacuum cleaner to clean it. Motor replacement video. Vacuuming without a s-bag caused this clogging of the entire vacuum cleaner - never vacuum without bag or with an unsuitable bag (always use original s-bag).
www.proexservis.sk/ponuka/ser...
www.proex.sk/
#diy #repair #motor #cleaning #assembly #disassembly #vacuumcleaner #electrolux #replacement

[@mohamedessayed8817]

Video parfaite merci beaucoup

[@pppeter9]

Without this video, I would not have been able to disasseble my AEG vacuum cleaner. Thanks!

[@proexservis]

You are welcome 😎👍 what was problem, faulty?

[@pppeter9]

The cable rewinds automatically, the brake is not working properly. I cleaned it, but it didn't help. I am using a clothes peg to stop the cable from rewinding now😅

[@proexservis]

You can remove that rubber wheel from cable reel and glue it surface so it will stuck there when it should

[@pppeter9]

Interesting! So you think if I pretend the rubber wheel from turning, by glueing it, the brake will work again?

[@proexservis]

Yes, because it should hold that reel in place, wheel should not spins, that metal rod doesnt hold it and it spins like a wheel. That brake doesnt work because of that.

[@akosbarth5655]

Thx! It was a big help. It would have been impossible without the video

[@maikvandewetering5516]

Thanks you helped me alot!

[@pizzablender]

These are nice machines. Just bought one (AEG branded) and good to know how it can be repaired. Even though I was given a 5 year warranty.

[@nikua8262]

Дякую тобі, добрий чоловік. Мав проблему - інколи вимикався пилосос. Передивився кілька твоіх відео. Зрозумів що проблема в платі. Точніше в конденсаторі 474. Паяльник у мене є, але паяти я не вмію. Тому вирішив купити нову плату. Обдзвонив усі сервісні центри Electrolux в Украіні, такоі плати ніде немає. Треба замовляти і чекати 30 днів, коштує 34$. Я не хотів чекати. Я поіхав на радіоринок, купив конденсатор 474К Х2 за 0.2$. Подивився в youtube як паяти. Перепаяв конденсатор за 10 хвилин. Все працює. Дякую тобі, добрий чоловік!

[@proexservis]

Thank you, I'm glad that video helped you and top of that you also learned how to solder 😎👍 sometimes, maybe in 1 of 10 cases pcb board is totally dead and vacuum cleaner doesnt start at all, so replacing capacitor doesnt help, but it cost a try, like in your case 🥳

[@psylohzoff4073]

You forgot to replace the black foam on the engine...

[@proexservis]

Maybe not, maybe I wanted to make it 1db(A) louder to punish customer… *evil laugh* 🤫 …but without glue, it wouldnt hold there

[@psylohzoff4073]

@@proexservis I'm fixing my mom's cleaner, what kind of glue would fit? I have neoprene...

[@proexservis]

It should hold, any adhesive spray glue or some epoxy glue, Gorilla glue could be good choice too, foam to metal 🤔

[@truckdriver1982]

I got water in mine...and it stopped working. Is it any idea to try and repair it?

[@proexservis]

Hi, probably motor is dead, disassemble it and measure contacts of motor on pcb board

[@truckdriver1982]

@@proexservis I took the engine apart...used some spray. But then a small plastic part with connectors fell out 😁 And I dont know where it should be placed. You dont happen to have a picture of the engine open? 😁

[@proexservis]

No, I dont have this motor apart at now or picture of it. Try to google part number 140075168041 Those connectors are visible from outside

[@truckdriver1982]

@@proexservis I got it togheter, but still same problem. The red light comes on for 0,5 seconds...then nothing. When I pull out the cord it comes back on...and slowly fades. I guess its best to buy a new one?

[@proexservis]

@truckdriver1982 did you measure resistance of motor?

[@_JuSt_Ic3]

42:22-42:55 is it hurt when u suck your hand for a long time ?😬

[@proexservis]

🤣 SMART function didnt react, so I punished it by sucking my hand little more… and more 🫣 until it reacted, so no vacuum cleaner was harmed 🤌🥲

[@pizzablender]

I think the Ultrasilencer 1800 watt model has stronger suction. But that also makes a lot more noise. The D8.2 / VX82 is really silent in comparison.

[@proexservis]

@@pizzablender yes, old vacuum cleaners have strong motors (most of them 1400W+), but since 2018 european vacuums can have max 850W motor, but with half (or 1/3) of motor power, there is only around 20/25% suction power loss in compare to old model (because of better technology with better use of suction power) +bonus, quieter vacuuming 🤫

[@pizzablender]

@@proexservis Indeed the world is better... also the brushes and hose seem to be better than in the past. Wide passages, all sealed so no leaks, smarter design.