Рет қаралды 216
#messytractor #5gear #settings #fittness #gearsystem #howtosolvethisproblem #workshop
Installation Process
1. Preparation
- Ensure the tractor is on a stable surface and secured.
- Drain any existing transmission fluid.
- Disconnect the battery to prevent accidental starts.
2. Transmission Removal
- Remove the tractor’s hood and any obstructing panels.
- Disconnect the driveshaft from the transmission.
- Detach the shift linkages and clutch linkage from the transmission.
- Unbolt and remove the transmission from the tractor.
3. Inspection and Cleaning
- Clean all components to remove any dirt or debris.
- Inspect the gearbox housing, gears, shafts, and other components for wear or damage. Replace any worn parts.
4. Assembly of New Transmission
- Install Bearings and Seals: Place new bearings and oil seals into the gearbox housing.
- Assemble Input and Output Shafts: Insert the input shaft into the gearbox housing, followed by the output shaft.
- Gear Installation: Install the main drive gear, countershaft gears, and selector gears, ensuring proper alignment.
- Shift Mechanism: Attach the shift forks, shift rails, and shift lever.
- Clutch Assembly: Attach the clutch disc, pressure plate, and throw-out bearing to the input shaft.
5. Reinstallation
- Position the new transmission assembly back into the tractor.
- Reattach the shift linkages and clutch linkage to the transmission.
- Reconnect the driveshaft to the transmission.
- Bolt the transmission securely to the tractor frame.
6. Final Adjustments
- Refill the transmission with the appropriate type and amount of transmission fluid.
- Reconnect the battery.
- Test the clutch pedal and gear selector for proper operation.
- Start the tractor and test all gears to ensure they engage and disengage smoothly.