Complete Full-Size Helicopter Build Movie (Part 1 of 3)

[@ultralighthelicopter]

See how i build the Main Rotor Blades here: kzbin.info/www/bejne/Y3fPnWSEbdyCaNU

[@thanhnhan7077]

respect for your entire work on this helicopter, from VietNam with love🥰

[@ultralighthelicopter]

Thanks and best wishes back to you in VietNam

[@MStafford499]

Love that the welds are covered as if the light over video is going to blind us😂

[@ManaArogyam2]

Very inspiring brother, you have done awesome work. Created a beautiful helicopter. Required geat skill and lots of experience in the subject. All the best for future projects

[@charlesbucholz8079]

Great work Bro! Im astonished! You take great pride in your work and im glad to have come across your channel. Thank you for sharing, your very inspiring 👍

[@ultralighthelicopter]

Thank you Charles

[@gonggostudio]

Saya suka melihat proses pembuatan helikopter, walaupun saya tak mungkin membuat helikopter tersebut..sukses selalu untuk anda❤

[@ultralighthelicopter]

Thank you gonggostudio

[@benc9059]

Ein Projekt an dem ich gerne mitgemacht hätte, da ich Hubschrauber sehr interessant finde. Danke für den Einblick !

[@Sturmgewehr_42]

Підписався 👍

[@ประจวบสุบิน]

อยากไปเป็น ลูกมือมากๆๆ ชอบ copfer

[@Sham-ou4ce]

Я смотрю с самого начала это очень интересно и хочу увидет первый полет мужик ты сделал хорошую работу Поздравляю тебя❤

[@miklemikle-1982]

Мне интересно, где он взял чертежи, не в курсе?

[@LE-6920]

@@miklemikle-1982 Либо сам придумал, либо в сети нашёл. Скорее в сети, поскольку очень похожие конструкции я видел на других ютуп-каналах... Не могу понять только одного - почему настолько по-идиотски он собрал систему охлаждения? Радиатор поставил там, где он будет обдуваться хуже всего, на выходной магистрали радиатора организовал колено, в котором ОБЯЗАТЕЛЬНО и ВСЕГДА будет воздушная пробка, расширительный бачок просто на шлангах висеть оставил... Не понимаю...

[@ozguracay2296]

Tebrikler... Uçtuğunu da görmek için bekliyor olacam

[@ultralighthelicopter]

Thank you ozguracay2296

[@RobbieJeffries]

Your 2yr dedication paid off ❤ your work your laith and milling skill are superb. Can't wait to see rotory wing build.ps highly impressed!!!

[@Ngnkg]

Great job ٫ well done man

[@ultralighthelicopter]

Thank you

[@brucelee-tn2mg]

Good job👍👍👍👍👍👍

[@ultralighthelicopter]

Thanks brucelee

[@brucelee-tn2mg]

jo

[@tyler5856]

Good job. Ive watched since day one, happy to see it complete

[@ultralighthelicopter]

Thank you Sir

[@ابومحمد-م3س9ث]

معنا الان عمل افضل من لكان لم يتم تنزيله في القناه الا بعد التجربه

[@danshavit4510]

That was an extreamly enjoyable six hours. Thank you ❤

[@rihanardhani352]

👍👍👍

[@ultralighthelicopter]

Thanks rihanardhani352

[@KarriKoivusalo]

Very interesting project! I'm a bit concerned about the welded tabs on the fuel tank though, if they are mounted too securely they are prone to tear open the tank in case of a crash and significantly increase the risk of a fire. Instead of holes, open top U-shaped bolt slots and a securing strap on the bottom would be well secure enough but allow the tank to detach and not tear apart in an accident.

[@ultralighthelicopter]

Hy. Thanks for your suggestion about the fuel tank mount. I will take this into consideration for a future update.

[@aerohard]

At 1:43:56 definition of "dead on balls accurate".

[@sundilBao]

Sir respectfully thanks for this information. ❤

[@vincejamison8078]

Wow, this is too cool. Ill be binge watching this today.

[@ultralighthelicopter]

Thanks, im glad you like it.

[@ombewphitol6968]

Best worker and getting better brother ❤❤❤

[@ultralighthelicopter]

Thanks ombewphitol6968

[@arifkhateeb5799]

Congratulation 💕💕👍👍

[@arifkhateeb5799]

Thank U

[@ultralighthelicopter]

Thanks arifkhateeb5799

[@arifkhateeb5799]

@@ultralighthelicopter 💕💕

[@jamal.salouni]

we miss you sir, we are waiting for the rest, keep going ❤

[@ultralighthelicopter]

Thanks, im on working progress...

[@oculusangelicus8978]

I have some questions for the fuel tank, I didn't see you put in a pickup inside the tank, nor a float/sender either, how do you know when you're getting low on fuel? Also does the engine have a fuel pump to draw the fuel into the carbs? there's a lot missing from your assembly video, being an aircraft, I would think that knowing your fuel status is pretty important data to have, correct? Fill me in man. Other than that, your build seems to be going beautifully. I love the way you are making it your own and customizing a lot of it to your airframe. Excellent work my dude!

[@letsgetsteve]

No sump. No baffles. No sending unit. No lift pumps. (There are supposed to be 2 in aircraft from what I recall) Yeah man, I'm right there with you in having questions.

[@ultralighthelicopter]

Thanks, i did a update on the fuel tank to add baffle plates, fluel level sensor and fuel level gauge in part 59 of the EXPERIMENTAL HELICOPTER BUILD SERIES. you can find the video on my Channel or with this link: kzbin.info/www/bejne/hWKQZmOep6aUrM0 Greetings.

[@NoName-ck2cq]

Looks good. I flown and fueled a lot of helicopters and have never seen a fuel cell with no baffles.

[@cruzo2355]

What does that mean? Is there some construction stuff error in his project? In like 2:02:53 I think those bearings are shot already...

[@LE-6920]

@@cruzo2355 And that is not only once error there...

[@ultralighthelicopter]

Thanks. I did a update on the Fuel Tank you can see with this link: kzbin.info/www/bejne/hWKQZmOep6aUrM0

[@bruceyoung1343]

Your metal work for this has been amazing. We could only wish to have the talent demonstrated building the helicopter. When will be the engine test campaign ?

[@ultralighthelicopter]

Thanks. The Video from the First Engine Start is the next in the Series (Part 67)

[@aajkiduniya1797]

U r adding so much nut bolt with any stop clip

[@mariglenzgjana8691]

great, are you able to share your maps and plans, or sell those ?

[@amyjojinkerson-b6o]

that shinny you get it out in the sun it will blind you

[@shashidharmurthy2226]

Very good effort sir, this skill can be used to manufacture a full scale Air car of four seater capacity.Engine or electric motors is your choice.e.motors is everyone's choice.All the best sir 😅

[@maurosergiopossas9694]

Very match

[@marcellebaudry5786]

bravo cool

[@ultralighthelicopter]

Thank you marcellebaudry5786

[@MeysamMoradi-c8l]

سلام وقت بخیر من از ایران ‏‪ برای شما پیام ارسال میکنم من کانال شمار دنبال میکنم و بسیار بسیار لذت میبرم از شما درخواست دارم اگه امکانش هست تمام نقشه ساخت وسایز قطعه هارو روی کاغذ بیارید کمک بزرگی به من کردید چون منم می‌خوام شروع کنم به ساخت

[@JAMSHEDIBRAGIMOV-if2bs]

BRAVO

[@miklemikle-1982]

Во все редуктора поставить сенсоры температуры и смотровые окна ну и конечно же сапуны для выравнивания давления с атмосферным.

[@LE-6920]

Ах, если бы...

[@العشايالدوسري]

How are you, you are a true teacher? Which country are you from?

[@juvanildolimasilva8429]

Your project is spectacular. I've been following it since the beginning. Forgive me if the question is not appropriate for this moment. But do you have an estimate of when the flight tests will begin?

[@letsgetsteve]

Those gears freak me out... Stay safe man.

[@letsgetsteve]

Pretty concerned about material selection and heat treatments/coatings etc... Also seems to have a lack of wired aircraft grade fasteners. If this is essentially a model then I totally get it, but if it is going to 100% be flying, my engineering alarms are going off big time. Again, stay safe man. This thing is cool but make sure it is safe.

[@ultralighthelicopter]

Yes, because this build is based on a early 1980s model.

[@Don-xl7me]

giant mechano :D

[@borisandressalazarguerjare268]

Hola desde chile como puedo comprar el rotor principal ciclico colectivo gracias ..

[@jean-lucpaul1043]

Bonjour, je regarde avec attention votre réalisation. C’est du beau travail. J’ai une petite remarque à faire sur e circuit de carburant. Il me semble que votre pompe à dépression mikuni est trop éloignée de la prise de dépression sur le moteur. Nous avons eu des problèmes d’arrêt moteur en vol avec un ROTAX 503. Le problème a été résolu en déplaçant la pompe au plus près possible du moteur. Nous avons aussi mis en série sur le circuit une pompe électrique. Très utile et sécurisant lors des phases de décollage et atterrissage. A votre service pour vous envoyer des photos de notre installation moteur

[@murwelder4512]

bang tutorial cara buat jet drive untuk spick boat ya bang

[@highfigh1]

Am happy am watching waiting to 2 years ago

[@ultralighthelicopter]

Thanks highfigh1 :-)

[@Muslixtrades]

Can i build my own one after watching the 3 parts of episode?

[@ironwoodd]

When you fly??

[@ultralighthelicopter]

Hy. In the near future. Still have some work to do...

[@العشايالدوسري]

How do I contact you?

[@amyjojinkerson-b6o]

try a all in one power belt

[@Mohammad-jp3iv]

این هلیکوپتر برای پرواز خیلی خطرناکه ،مشکلات مربوط به گیربکس غیر استاندارد (احتمال رد شدن دنده)و عدم زاویه پذیری مناسب پراپ بالا داره. کار شما خیلی عالی است اما اشتباهات جزیی موجب مرگ میشود

[@yveslegrand9826]

Stating an helicopter build by welding stainless steel is a no no to me. Stainless steel is just not for aircraft..

[@tylertinney2095]

Loos like aluminum not stainless

[@tylertinney2095]

And you can tell by the lack of color on the weld beads also he is using AC not DC

[@Lone_Vaquero684]

Well, I wanna ask, what would you use

[@johncruz7923]

Yes it is

[@ultralighthelicopter]

Hy, you can find a update on the Landing Gear Skids here: kzbin.info/www/bejne/ioDLqJefoMicpM0

[@aajkiduniya1797]

U need to weld anything or adding ribbets

[@dinokaka1366]

I Need All size of part

[@lloydsimms]

Metal work was great. Instead of having all the welds on the skid, why couldn’t you just bend the pipe

[@Alexandrp74]

Потому что человек перфекционист.)

[@ultralighthelicopter]

Thanks. I have no pipe bender.

[@amyjojinkerson-b6o]

are you going to flush the tank out

[@aajkiduniya1797]

Otherwise u will be die if when engine rotate so much shock create in body all nut bolt will be loose

[@SaleemkKhan-i2s]

this rotax 582 engine how much price

[@xuseenmk1513]

Do you have telegram page

[@aajkiduniya1797]

Don't be angry

[@xuseenmk1513]

How do i contect you

[@aajkiduniya1797]

But I think u r fool