Complete Guide to Mounting a Riflescope to an AR-15 ft. Jerry Miculek | Vortex Selects

[@kennethjoseph2812]

This dude sold me on buying the torque wrench. Vortex, give this man a raise.

[@johnspartan3405]

Your comment just made me order one before I watched the video

[@FirearmOutfitters]

Now that I have one there’s no way I’d ever be without one…like something I didn’t know I needed until I had it.

[@thomasbergan6932]

😂

[@Lexidezi225]

Make sure you turn your torque wrench down to the lowest setting when you’re done with it. Leaving it turned up will ruin its zero. I’ve seen many guys not know this

[@benkanobe7500]

What torque wrench is everyone using for scope mounting (there are a lot of choices)? Amazon link?

[@stephenhair5501]

When using your Torque Wrench, it is recommended that once you are done with it, you take the tension adjustment back to zero setting. This will relax the internal spring and help preserve its accuracy. A good quality torque wrench is a great tool. Thanks for sharing Jerry.

[@stanhutchins4365]

When Jerry speaks I stop what ever I’m doing and give him my complete undivided attention. His word is gold. Great video Jerry.

[@Aldocello1]

Been mounting scopes for years and know the procedures in my sleep , I watched because Jerry is just enjoyable to hang out with !!! 😊

[@TimberwolfCY]

Jerry is just such a...class act. Simple, efficient, light-hearted and good-natured. Got the to part 7:20 and realized that I've been over-doing my ring screws, and while I'm kicking myself (despite not damaging any of my gear, thankfully), he just sort like laughs it off, like no big deal, we all learn. Love this guy.

[@chipsterb4946]

“You’ve been a sinner” 😝 Haven’t we all?

[@jgfr22]

Best, clearest video for mounting a scope. (Didn't hurt that my scope = his scope.) First timer, I did it exactly as he explains it, mission accomplished!

[@user-jr5bg4ov8j]

Fun to watch, love how he incorporated safety at all times. Great instructor.

[@BrianBaird-sy8hg]

Great and easy to follow and understand. Talks American English and explains thoroughly yet simply. 👍

[@briancarroll8382]

There’s not to many people I think I could just sit and watch all day but Mr. Jerry is one for sure. Thanks for what you do.

[@pfunkallstar]

Me trying to calculate in my head how many clicks he should make at 10 yards. Jerry: "Let's give it a little love" CRRAAAANK

[@calemccallum9736]

lol we all do it. Gotta love Jerry for the realism aka old school.

[@tbonedavidson8440]

Wish there were more folks like you out there Jerry. So much respect goin out to you sir

[@alexmaness4138]

I love his presentation. Great job. And I'm jealous of how much ammo this young man has. Good lord.

[@DozzBuzz]

This video makes me stand up in the middle of the night and go check my scope if its tightened well and not over. Thanks Jerry:)

[@meganmartin3151]

Just got the strike eagle 1-8 so this is perfect. Thanks for the video

[@iLLBiLLsRoastBeats]

Did you use a torque wrench on the scope? I bought a wheeler torque wrench but don’t exactly know how to use it correctly

[@eliasdonahue566]

i could watch this guy all day long. what a wealth of knowledge

[@ihatenewyork]

Thank you for using the correct description for your weapon. Modern sporting rifle

[@Wheresthefishadventures]

I love all the vortex scopes I work at sportsman’s and can compare other glass to vortex and vortex always out performs I love the content and your products when I can afford it I will get more💯

[@Dedncide]

I just picked up a Strike Eagle 1-8 and I'm actually quite happy to see Jerry show me how to put it on.

[@dlieneck]

I really love and appreciate the safety reminders. It is easy to get complacent. Continual reinforcement prevents accidents. Also, great video on mounting. I just mounted the same scope but made the mistake of aligning the rear with the charging handle with the scope cap on. I was craning my neck to get closer. The moment I saw you remove the cap I realized my error. Thank you!

[@Lexidezi225]

Yea I have the same scope and mount and I feel like I have it back towards me more than Jerry does. When it’s in 8 power the eye relief is only 3-4 inches

[@jsmiley12]

Jerry is that Dad/Grandpa that all of us wish that we had...

[@adibee88]

Super Thorough and Easy to Understand, How To on my new scope! It's GREAT having a Weapons' SUPERNATURAL dropping knowledge, safety, shooting and Scope Dope tips! SEMPER FIDELIS ⚡☠️⚡

[@pault.mccain6637]

Perfect timing, I just got my Razor Gen III..... Thanks Jerry.

[@VortexOpticsUSA]

That's awesome! Now you have all the info to get it mounted!

[@thir13en1]

Thx Jerry awesome video, very informative. Thx for clarifying inch per pound rather than feet per pound on torquing down on the scope mount.

[@jimklemens5018]

Inch-pound

[@mlentsch]

Who doesn't love this guy? Vortex was smart to retain him...

[@akforge]

My Vortex Strike Eagle (1-8x24) Sport Series cantilever mount instruction manual states the base screw torque is 20in/lbs and the ring screw torque is 16in/lbs.

[@chipsterb4946]

Excellent reference. Thank you, especially for the gentle but consistent safety reminders. The only thing I’m unclear about is why do the final tightening of the scope base on the rails AFTER tightening up the rings on the scope.

[@bigk4755]

Just guessing here, but I will bet that it has something to do with how much torque for each setting. By following this order you will not forget to turn the torque wrench setting down and over torque the scope rings.

[@PickleRick849]

Per Vortex for the Mount 30 in/lb for mount 18 for mount rings.

[@josueneris1861]

Just mounted my first Lpvo with this video, thanks a lot!

[@alcantrell5340]

What torque did you use on the base clamps ? Vortex recommended 20inch pounds. I couldn’t find it on the cantilever mount package. Only the 18 inch pounds for the rings. They supplies an 800 # for technical support. I called and the representative says 20 inch pounds to the base clamp, but said 25 would be ok ✅ I don’t mean to doubt JERRY BUT 40/45 may strip out the mount or snap off the screws, I’m sure Vortex would not stand behind 45 inch pounds. I set mine at 25 on my 1x6 Strikefire LPVO with the cantilever mount on my AR 10 308 cal.

[@sviestitiesa5277]

Jerry is terrific. Great content, clear instruction and succinct. I wish he was my neighbor or my uncle :-)

[@xXkillwithskillXx]

I have a viper pst on the way for my 6.5 grendel build, cant wait

[@michaelfinney2160]

Excellent information Jerry ! You the man ! Did not know all this information was so crucial in correctly mounting a scope ! 🇺🇸⚡️TCB⚡️

[@Stephon723]

I like his safety mindedness. I'm sending this video to a friend.

[@dorianleclair7390]

I just mounted the strike eagle 1 to 6 on a aero precision superlight mount. Zeroed it in yesterday. Very happy

[@VortexOpticsUSA]

Awesome!

[@alcantrell5340]

@@VortexOpticsUSA I just bought one ( 1x6 Strike Eagle ) and installed it while watching this video, just a little concerned now, the torque specs seem to be all over this place. 18 inch pounds on rings is consistent. But the cantilever mount Jerry said he set his torque wrench to 40 then after tightening he said there 45 inch pounds ? So I googled it and depending on site it calls for 18 rings 25-35 clamp base. On another site said 15-18 Rings 40-50 clamp base ? Just seen another one of Jerry’s videos where he mounted a VORTEX RAZOR on the Cantilever mount and he said 15-18 on rings and no more than 33 inch pounds on base clamps???? So what is it ?? WTH

[@LuisMartinez-hg6gg]

Jerry I like your old school technology 👍🏻 It works for me too. Good video

[@danm7298]

What is that level hes using? I need to get one

[@cbroz7492]

We used'ta sight in the main gun on our M60 series tanks with the old string and binocular method...set the strings on the muzzle...there were vertical and horizontal notches at the muzzle..then we'd get the binoculars and sight through the breech at the target and call the adjustments to the gunner who'd adjust the sight on his scope accordingly...this was the summer of 1971 at Ft Knox...

[@darronlewark6504]

Did that M60 come with a 6 pack of bud and a leisure suit? Reminds me of an old hat we had as an instructor.

[@micnor14]

I know I'm late to the party just glad to see Jerry did a video on the very scope w/mount I got on sale through PSA for $350! Great scope, the "lever" is kinda puny but it's not at all a deal breaker.

[@allywilkeforsenate]

This will cut your learning curve.Thank you Jerry.❤️👍

[@JepdT]

Jerry is a treasure and a living legend! I am a novice, maybe my question is reflected in that but why not a drop or two of blue Locktight?

[@williamlesh109]

Great video Jerry.

[@cjtoledor]

Awesome video. 🤙🏽

[@5jjt]

On the Wheeler FAT torque screwdriver, use the middle of the fat red line to determine the torque setting. The manual makes it sound like the top of the red line, but i emailed Wheeler and they said the middle.

[@give_guns_a2_chance499]

Oh man vortex it's gonna hate me for my torque thanks for the tip I just bought one of those

[@ellenj8896]

Really good vid, and very helpful. Thank you!

[@VortexOpticsUSA]

🤜🤛

[@cmitalo5574]

" So I can see I'm about half inch, so we gonna go click, click, click , click, about that much more" hehehe. "Old school guys". Yup and a whole lot of experience.

[@StevenSmith-pt8rz]

I know a lot of people don’t do it. But on the cap screws I have always put a hairs drop of blue locktite. Have never had a problem mounting or removing.

[@VortexOpticsUSA]

We do not recommend putting any Loctite or threadlocker on the screws as you are then dealing with a wet torque. This will act as a lubricant causing the torque wrench to slip and give you a false reading. Generally, adding Loctite to a screw can add about 40-50% extra value you to your torque setting.

[@tom_olofsson]

Excellent as always.

[@mpitogo]

I love watching Jerry. I have had the Vortex Precision Cantilever 30mm mount with their PST Gen II 3-15x44 FFP MRAD come loose off my HK MR762. I torqued the rings to 20ft/lb and it seems to be much better. I torqued the base to 50ft/lb. Maybe with a light recoil like the AR-15 shooting 5.56/.223 and a lighter scope 18ft/lb would be ok. I used 18ft/lb with no issues on a Warne mount with a Trijicon Credo on my MR556, no movement. I think the external piston operating system is a bit more violent.

[@Rooster_king]

You mean in-lbs not ft-lbs

[@Lexidezi225]

U need to use blue loctite. That’s why you’re having an issue. I also give them an extra little torque on top the 18 in/lb

[@mpitogo]

@@Lexidezi225 The rings don’t recommend locktite, I tried more torque and so far no issues.

[@tomwolves6953]

Great video thank you!!

[@thechannelq8728]

Ordering one (strike eagle) Friday for a 300blk. I'm going to see if I can make a truck/hunting rig out of this setup.

[@adibee88]

GREAT Build Choice (Caliber) and Scope! My EXACT setup; looking forward to dialing this scope in today! 👍🏼

[@illestdomer2005]

Why not torque the base down first and the confirm level on the scope before torquing the rings?

[@tbtaijeron]

Uncle Jerry how did you like the strike eagle by vortex?

[@Leo-dy3ds]

Late in the game here, but with this video when you suggest your go to Hornady Match ammo the bullet weights set aside are you using the 5.56 or 223 in the 55 grain ammo? what is your experience on the difference?

[@arthurhaberly1457]

Watched a video before this and dude said nothing about the torque on the bolts, leveling the scope or loading the scope forward. I knew jerry's video would be the best, and yes Jerry I was a torque sinner before this.

[@chris.eskimo]

Jerry.... how about using a laser boresight ? What are your thoughts?

[@MikeNaples]

I used one ~1 year ago after mounting a Primary Arms 1-6x24. It got me on paper at 50 yards for which I was relieved. Hate to go to the range and not be able to hit the target. I laser sighted in the house at the longest possible distance (only about 30 feet.) Tried bore sighting but it's really hard to see much out of the skinny 223/556 barrel. The laser set up is relatively inexpensive on Amazon and the only negative is that you have to be careful not to shine it in your eyes while fumbling around putting it in and out of the chamber.

[@bobbyhexlrod1651]

Jerry probably NEVER imagined his wall of ammo would be worth a $1mil one day.

[@VortexOpticsUSA]

Right?!😂

[@drdwgmd14]

@@VortexOpticsUSA lol u all comment, awesome!

[@VortexOpticsUSA]

@@drdwgmd14 🤜🤛

[@thomasleathers2201]

Seriously I had to pause the video and admire that ammo shelf 😂

[@FirearmOutfitters]

So the question I have is can I mount the base to the LPVO without mounting it to an upper? I know that sounds strange I’m just waiting for an upper and don’t want to pull my other scope off the rifles current upper

[@TTime685]

Isn't that rear scope ring way to close, if not touching the scope adjustment knobs/housing? The scope needs to be moved foward some, or the mount backwards for even spacement, or more even spacement..

[@calemccallum9736]

@vortexoptics do we know what Jerry does to precisely align the reticle?

[@dancruze]

Does Jerry use thread lock?

[@jayejordan6754]

How did you knock out all that recoil?

[@neilhightower2270]

I wonder if he actually uses vortex scope mounts on his comp guns. Not saying they are bad, but there are better if your willing to shell out

[@jacksonholmes9955]

My gosh that charging handle is so crisp and smooth

[@daveblacklock9173]

Knew I was in the right place when I heard Jerry talking

[@kjw882]

I’ve got a question for ya. Do you ever feel the need to lap your scope rings? I never have and never felt the need to but I’m curious if you recommend the need to.

[@VortexOpticsUSA]

Great question! There is no need to lap either the Pro Series or the Precision Matched Rings!

[@kjw882]

Vortex Optics how about the sport cantilever mount?

[@bmxer1997isaac]

thats more for twist locking scope ring like leupold

[@VortexOpticsUSA]

@@kjw882 You shouldn't have to, but you can always start lightly to see if any is required!

[@kjw882]

Vortex Optics sounds good. Thanks!

[@juniorg7121]

Would you recommend using loctite on the screws for mount and scope rings?

[@Caleb-bd9dd]

Yes

[@jimklemens5018]

Absolutely not.

[@xochj]

Kind of scary how many shops don't loosen the torque wrench after each use. (click types.)

[@zachhyatt6351]

Between the Vortex company’s staff and @kitzmillershooting7205 , and this fella here, I have found a good scope and I am ready to practice. Thank you!

[@koffeekage]

Im just trying to figure out if the Viper PST 2-10 will fit or if there is some fundamental difference between that and the 1-6 scopes its marketed for.

[@VortexOpticsUSA]

Hey there! Are you wondering if the PST Gen II 2-10 would be an option for an AR-15?

[@koffeekage]

@@VortexOpticsUSA i have the Viper PST 2-10 FFP and am looking for a tacticool mount that can also have a Red Dot piggybacking on the scope rings.

[@big-k-7.62.]

I've torched a scope properly. But then wen I went to switch mounts the screws on the rings stripped out. How do you get screws out safely without stripping the head. I use high end mounts. Any info would be much appreciated.

[@VortexOpticsUSA]

If you are worried about stripping out a screw head you could use a product called Drive Grip. It is a gritty material you can place in the head which helps the bit grip better to avoid stripping.

[@chrissewell1608]

Use that torch again? 🔥 LOL

[@jimrock6083]

@@chrissewell1608 Comet abrasive cleaner and a dab of spit is much cheaper. Or just a little sand. Have used both in different environments.

[@whosyodaddy21]

What is the part # for the correct cantilever for a strike eagle 1-6x24? I mistakenly ordered part # CM-102 and it wasn’t compatible, the diameter was too narrow.

[@mackkendrick6903]

I will trust anything this man says about firearms …he could tell me a derringer is the best handgun and I’d go out tomorrow and buy one

[@Logic_Monster]

What is the name of this red cleaning vice?

[@joshuahenry4218]

I like this guy

[@VortexOpticsUSA]

We do too :)

[@wbyrd01]

What brake is he running? That gun barely moved!

[@thechannelq8728]

JM has a GOD given biological brake.

[@WilliamDell95]

His gas system/buffer system is tailored to his liking.

[@chipsterb4946]

I’d like to know that as well. He clearly had a muzzle brake/compensator on that barrel - my guess is that it’s a compensator. I can find several that look similar but not that one exactly.

[@venomgt7299]

Scaler works scope mounts come with a self leveling system. Takes you 30 seconds instead of 3 hours

[@joeduvall3891]

Haven't had a chance to test if it holds zero, but mounts just fine and has nice clear glass. Centered vertically true to a plumb line with the crosshairs which is always a plus!It's a great kzbin.infoUgkxc4K63Fd5LglDMObu7-Bgapxp_ef0W8hE scope. There's no parallax adjustment or focus ring, so may be limited to 3-7x, have to see how it is on the range. Also be aware that the rings are "look through" so you can still use irons, but they are really tall if you only intend to use the optics. On a 22LR no biggie since I'm not shooting competitions or worried about a hard cheek press. Will boresight and range test, if all goes well, I'll leave it at that!

[@almirhajduk]

Very coll old scoll hehe

[@MichronPlaysDrums]

What torque wrench is that? Or ones you'd reccomend?

[@VortexOpticsUSA]

That is actually our torque wrench: vortexoptics.com/vortex-torque-wrench-update.html

[@wetonwet3655]

I have the same scope and mount. does anyone know if it would clear the ruger 556 front sight, if not do i go with the burris pper or get a riser?

[@danielcruz2256]

What torque wrench is he using

[@VortexOpticsUSA]

That is actually our Torque Wrench: vortexoptics.com/vortex-torque-wrench-update.html It is currently out of stock through us, but check out some of our dealers as they may have them in stock.

[@jaedon8932]

No threadlocker?

[@VortexOpticsUSA]

No threadlocker! Threadlocker actually acts as a lubricant causing your torque wrench to slip and it will cause you to get a false reading. Using a lubricant such as threadlocker will cause over-tightening.

[@rico_cavalierie]

I mounted scopes for people. Some of my co-workers wouldn't use a torque wrench or level... Their mechanical prowess with just a Leatherman would rival anything from NASA... In their mind. My point is if you get a shop to mount a scope for you it will pay dividends to ask around to see who has a clue.

[@davidnguyen5028]

Jerry: The guy from Vortex on a separate video said the torque is 18 inch-pounds. You said is 18 ft-pounds at the beginning of the video. Nơ wonder there are so many Vortex scopes got sent back to the manufacturer for warranty repair.

[@VortexOpticsUSA]

Hey David - just a slip! 18 in/lbs is the recommended torque value with no Loctite or any other form of threadlocker.

[@michael1980q]

Jerry please forgive me for asking something silly. But may I ask why you sight it in at 240 yards? I feel I know just wanted to hear your reasoning. Thank you. Or anyone that could help.

[@sharkk2770]

That's probably the furthest distance of his rifle range. Same as mine

[@ToolsSNAPON]

Please help, Where can i found the fueled by Hornady sticker( on but stock)? Thanks for anyone.

[@DavidSmith-ve5kj]

Do you suggest locktite screws

[@VortexOpticsUSA]

Not on the ring screws. Loctite acts as a lubricant which causes the torque wrench to slip which gives you a false reading. Simply following the proper torque recommendation is the best practice.

[@Joshua-1986]

All that torque stuff is bull crap I know you know what your doing but I’ve been putting scope on for awhile my self what I do is I put the screws in make sure I got the spacing good and I tight them down until tight I don’t force them any past that and with some lock tight you good to go

[@scottkelly7051]

I could watch him change oil in a lawnmower and enjoy it!

[@VortexOpticsUSA]

😂

[@russdennis7026]

What torque wrench are you using?

[@VortexOpticsUSA]

vortexoptics.com/vortex-torque-wrench-update.html

[@sinistersilverado965]

I always thought you had to torque down on the rings as tight as possible, I have a Strike Eagle 1-8 to put on my Grendel pistol

[@VortexOpticsUSA]

Nope! You can actually run into a lot of problems doing that! Using the proper torque is crucial in mounting.

[@jamescampbell1126]

Recommended 20-25 on your torque wrench by most scope mfg's.

[@VortexOpticsUSA]

@@jamescampbell1126 with a good quality set of rings you should not need anymore than 18 in/lbs with no Loctite on the ring screws.

[@alcantrell5340]

@@VortexOpticsUSA why didn’t you say something on Jerry’s torque specs on the Cantilever mount 45 inch pounds is twice what your company recommended to me on the cantilever mount base clamp ? Your company says 20 inch pounds on the base clamps. 18 inch pounds on the rings! Am I missing something here ???

[@VortexOpticsUSA]

@@alcantrell5340 Depends on the mount. Different mounts have different fasteners on those base screws, may be made of different materials, etc and can require different torque specs. If you called tech support and they recommended 20 inch pounds for your mount, go with that. On this precision cantilever mount, the base screws can and should be torqued up to 40-45 inch pounds.

[@abc123def98]

lol who goes from 10 yards to 250, only Jerry lol. Great video.

[@VortexOpticsUSA]

Haha the one and only Jerry! Glad you enjoyed the video!

[@ZRock7771]

Where can I find a level like that?

[@danm7298]

Thats what i want to know. Idk y they dont mention that. everyone watching this video wants to learn how to mount and level a scope

[@c.chambers827]

That is a protractor head for a combination square. It looks identical to my Starrett protractor head, except mine is about 25 years old and his looks like it is 45 years old. Starrett tools are on the pricey side, but you'll have it for life.

[@jormen23]

Why I can´t find the 1-6 anywhere?, is it discontinued already?, thanks.

[@VortexOpticsUSA]

As you can imagine there is quite the demand for optics right now - we appreciate your patience! The quickest way to get your hands on one would be to get on a backorder list through your local dealer.

[@jormen23]

@@VortexOpticsUSA Thanks, so then 1-6 strike eagle is not discontinued and still in production right?, this is a great scope.

[@bubonikCHRONlC]

im just drooling over all that ammo.......

[@earthling2024]

Im sold bought 2 of them

[@rolandsapo]

What mount us he using

[@VortexOpticsUSA]

This is the 30 mm Precision Extended Cantilever Mount.

[@bluesfan51]

What about lapping?

[@VortexOpticsUSA]

That will depend on the rings/mounts you are using. It's always fair to check, but most of our rings/mounts do not require lapping.

[@park5231]

What scope mount is that?

[@VortexOpticsUSA]

That's the 30 mm Precision Extended Cantilever Mount.

[@ToolsSNAPON]

@@VortexOpticsUSA Vortex for me +1!

[@parkerhoffman7195]

I almost couldn’t pay attention with all the ammo in the background