Complete repair and rebuild of my ROTTING deck and railings!

[@cameronbarber3768]

I think the timing of this is obviously fitting with the update videos and honestly im just thankful for an early upload this week!

[@sacaro5k]

You guys should build an office under there now that it's waterproof! Well done guys!

[@ottosmusic5900]

they already did

[@sacaro5k]

@@ottosmusic5900 That's the joke, you found it!

[@Formula7Driver]

That's a great idea! I would also add a fire pit somewhere on the property, let's say instead of the pond

[@efenili]

When building said office make sure to take note of where you place the toilet...it might be tricky, just a hunch I have

[@Sharkbite0592]

They should build a house attached to the deck!

[@kenreynolds1000]

33:55 Ok, how about how do you cap the angled ends? That is the kind of stuff that always put me off using hollow section decking. Maybe manufacture from a couple of caps and bond together or make from deck stock and make plugs and holes?

[@anthonyhuffman1069]

To lad to see I'm not the only one that noticed this. Looks unfinished

[@thebl4ckd0g]

Remember watching the original videos for this, love rewatching it again. :)

[@fintan3563]

I know I’ve seen this before. I’ve seen them all (several more than once). You’re showing us the waterproof decking that allows you to build your office under the deck! 👍👍👍

[@robertkerby2581]

I enjoyed watching you and your crew tearing down, then installing your new deck! Well done, Perkins Brothers!

[@johnking8679]

I am a brand new viewer to your channel !! It's fantastic !! Wish I had known about it a while ago !! Your topics and presentations are excellent interspersed with some humour !! Thanks for NOT having bad language, too !! I look forward to many more views in the future. Onwards and Upwards !!😅

[@mikem8758]

Your team does excellent work…so much attention to detail!

[@marsBWR]

Do the end caps of the waterproof portion have a drainage hole? And what about the 45 degree cuts, do those get caps that fit? Do pests stay out of it? I feel like it would instantly get a wasp nest.

[@anthonyhuffman1069]

I noticed the 45 degree ends were not capped in the drone footage at the end. The caps of the straight cuts appear to have drain holes. Didn't think about pests getting in. Good thought

[@anthonyhuffman1069]

45 cuts definitely makes it look unfinished

[@michaelbradley7529]

I would use Lexel to glue some of those ends caps on the diagonal cuts of the decking. With the cuts being longer because of the diagonal cuts, you may have to fabricate some out of the left-over decking material. That decking does look great.

[@anthonyhuffman1069]

Noticed this as well. Looks unfinished

[@tinageorge8058]

Oh my goodness, I love watching these fellows. I’ve learned so much. Thank you and thank you.

[@solsticesummer982]

I love watching you guys work! It’s good to see how you work through problems.

[@ninabooker2904]

Super beautiful view of the mountains, very pretty. Love to see your son working with the crew, that’s good parenting there.

[@johnwillemse4140]

Stay healthy and keep up the good work at the site and for the people in need...from the other side of the world the Netherlands

[@bjornvollheim7303]

This video made me happy. An investment lasting for grandchildren to inheritate. And safer than just some money on an account

[@Susan508.1]

This is great! I was not aware of this product. Thank you for reloading. I need to visit you guys, I’m an architect who recently started my practice in Sylva NC . I have clients who need a good builder. You guys are perfect.

[@SapBellySoul]

I love seeing the ramps on the ground as they remind me of my childhood.

[@crimsonwoodworking9609]

Even though it's a Re-Load I'm watching anyway. Love you guys

[@miker1448]

PBB and crew are excellent. Eric's editing is top notch!

[@Donttreadonanyone]

We used this stuff before. I think it was 33 unit condo in total. All the decks were 6’x12’ or so. The guys from Duxxbak came and “certified” 3 of us to install this stuff. I left that job before they were tested but I had my doubts about it while I was installing it. We played hell getting the first one waterproof (the one the guys came and certified us by watching us install 3 boards each). We spent so much time putting in all the blocks all around where the deck meets the structure because there were bolts all in the way (this was a remodel) and the GC didn’t want to replace the joists. All in all I think I like the trex idea of catching the water with rubber membrane in between each joist and a gutter.

[@walnutcontractors5661]

With the cost of a composite deck, why not just sheet it with plywood and apply a torch on membrane that is good for 30+ years. Waterproof and you don't need to go with some specialized composite system or install crazy blocking. Additionally you can layout your decking in whatever pattern you want as you've got a solid subfloor.

[@YvesMorin-l4f]

Hi guys, great job. Great product. For the boards that are cut at angle, use 2 end caps. Just cut one of the 2 to make it fit whole.

[@ryanburke3092]

Hey Erik, I noticed you were using a knife to get off the globs of dust on your sandpaper. I had the same problem not too long ago and I used a plastic bristle brush that seemed to do a really nice job.

[@cherylrosalis1948]

It seems like this was just yesterday instead of a year ago! How time flies.

[@ezforsaken]

I like when you do the full build videos, I usually watch every video from you guys the day it's up, but I like to watch the wrap ups as well>!

[@rgarlinyc]

Beautiful job guys, on a beautiful house! 👏🏻

[@nickk05281982]

Is it possible to do the wire vertical so it passes code?

[@PerkinsBuilderBrothers]

It does pass code here where I live

[@likeaboss901]

Jay's Parting Words. Should be a regular segment in all your videos😂

[@stefferson888]

Wasn’t this video uploaded a couple of months ago? You guys were working on the office/gym below?

[@jestermanderson3308]

Its a call a prequel it give a better understanding of the latest video package i love it

[@millcrafters]

Love your channel. How is that waterproof? As long as you don't get a full inch of rain. Look at the waterflow. It will spill over and drip down below.

[@PerkinsBuilderBrothers]

yep.. luckily the deck is pitched 4 inches from one end to the other, so it drains pretty fast

[@kellycarrier1516]

Beautiful job and love the type of deck that is♥️

[@jedifyll]

Feels like I'm back from the future! Great job gentlemen!

[@johnnyfive-bc]

@Perkins do you mean Attic access? You are using some wild words. Never head of Scuttle hole in my entire life. OMG

[@marymigliore3396]

Why are you showing this deck build againe ?? I LOVE YOU GUYS !!!!!!!!!!

[@TWPRP]

I'm getting video withdrawals.... So im watching them all again and making sure to like it so i know i watched it :)

[@-aid4084]

Question, if the deck is waterproofed, and the water seeps through the small gaps anyway and then gets trapped, isn't it just going to rot out eventually?

[@davegordon6943]

It runs down little channels with weep holes at the ends

[@jamespppyacek342]

You guys ever build decks out of wood? I have that angle drill jig thing. Your bits have to have a hex shank. Ceiling looks great. Real wood! I've built decks in SoCal out of DF. Is it code to have those gaps in the angled corners?

[@creylacoste4981]

Whoa , that would make a great office /gym space underneath there, would be a cools series for a tweezer project

[@timskufca8039]

beautiful project!!!!......I wish you had talked a bit about budget. It was at least $100,000 upgrade, which is worth it for value, but clue us in, please.

[@jonblair5470]

Really cool decking material! Never seen it before.

[@albertwilson3396]

I think it's a great video. Can you please make a video showing what happens to the water

[@Yo_AB_Breaks]

Gorgeous build.

[@anthonyhuffman1069]

I noticed in the drone footage the 45 degree cuts on the front were open at the end of the deck. Is that like that for drainage or do they not make a beauty plate to go over the end of angle cuts?

[@anthonyhuffman1069]

Re watched the drone footage looks like the straight cuts have beauty caps but nothing for the angle cuts with drainage. Kind of makes this system limited to certain designs like square or rectangle decks to look completely finished

[@michaelthompson383]

how much past the facia did you overhang the decking for drainage? Any concern of water curling around bottom of deck board back to facia?

[@buildlife]

Loaner hard hats and vests at the land fill are like borrowing used underware from the lost and found LOL! We've all done it!

[@walnutcontractors5661]

or the used speedo at the swimming pool.

[@gregcoldewey7724]

This is effectively the roof of the new addition. Could you use this material for roofing? If it holds up to sun and doesn’t leak seems it would be a good choice for hail prone areas?

[@walnutcontractors5661]

@gregcoldewey7724 How much is that stuff $5 a linear foot? so $10/sq ft means $1000 a square vs $200 for a 3-tab roofing square. so 5x your average roof cost.

[@Justthemow]

Hey I dunno what type of panels those are but plastic or vinyl gets brittle as it is exposed to UV light have you ever takes down old vinyl panels on east west exposed walls it gets chalky and cracks. It is what’s called hydrophilic

[@hawk5000]

You already uploaded this video last year, or am I wrong? At least you already fitted the terrace with the waterproof floor covering last year. But thanks again

[@anthonyhuffman1069]

I also live up north and webget snow and ice. Will the water freeze and clog up the drainage in the channels. Has the deck boards been tested by supplier for freeze thaw?

[@curiouscat3384]

I've seen so many horror stories in the news about decks falling with people being maimed and even killed - this is a great example of how to do it right But also anyone buying a house should inspect the deck thoroughly before throwing parties on it!

[@pc215]

With the pitch in the deck, did you make the railings out from the house level or at the same pitch as the deck (parallel to the deck)?

[@mikemmikem2758]

Gorgeous new deck. Love the easy install decking. You should charge rent for walking on this to recoup some money. One suggestion on the railing is to put solar lights on top of the posts. Thanks for another great video and thanks for not cutting these videos too short.

[@bccoolsingh]

Hey guys love your vids. I think you should use the space under the deck as an office/gym or something especially that it is waterproof underneath. 😂

[@peterarmstrong8613]

Can water from condensation and seepage drain from bottom of railing columns?

[@turtuhl]

Doggo is like, "why you talk so much. put in deck board!"

[@sciencewoz6258]

lol I just went back like 2 hours ago to watch the original deck building video what timing. great videos as always

[@milesharlan1]

I made it guys..A Tuesday change up w a quick review of deck project..tks..

[@OoLIK3AB0SSoO]

My dad installed a a similar decking product on his deck about 10 years ago. Over the years he has had major bee issues with the holes on the cut ends of the deck boards. What has your experience been?

[@PerkinsBuilderBrothers]

Interesting… Good so far

[@joaquinstabbington673]

@@PerkinsBuilderBrothers The deck boards where the ends are not cut at 90 degrees (33:56) look like a insect invitation! Bee or otherwise. Obviously the manufacturer's end caps are designed for 90 degree cuts, but there's got to be some way to deal with those angled cuts???

[@anthonyhuffman1069]

I wonder if the supplier has a screen they could plastic weld to the caps?

[@anthonyhuffman1069]

Cap drainage holes I meant. Maybe a design change that could help solve this problem

[@steelen]

This seems like a re-upload?

[@PerkinsBuilderBrothers]

It’s the best of five full 20 minute videos crunched down to a 30 minute full build

[@pigalex]

@@PerkinsBuilderBrothersconsider naming these something like “supercuts” or “the gist” to avoid confusion :)

[@robertarmstrong1140]

What in the reload is going on!?😂

[@steelen]

@@PerkinsBuilderBrothers I suspected that considering the current series but couldn’t remember. Thanks!

[@VirusEcks]

yeah it seems to be shortened version of the whole process still I'm going to watch it

[@Pete-nl8ok]

Beautiful deck!

[@-_James_-]

Why didn't you run the cables straight through the small corner gaps so each cable is one continuous length?

[@FernandoIgnacioVelosoUrrejola]

I use a eraser to clean the sand paper from the hand sander, it might work...

[@FaithandRaymond]

Jason is such a handsome hard worker!

[@axelmejia8359]

How you call this material? Interesting

[@brianheath982]

Ive been looking for a good outdoor rated fan for a porch make over. What is the brand and model of the one you installed for this project? Appreciate it!

[@davidhaworth7152]

28:15 Do HVAC and couldn’t live without the 90 adapter.

[@sylvettecolon5024]

Beautyful work

[@kearneyfamilylondon68]

Great to see a recap!

[@joecct77]

Thank you for adding this.

[@johnpiegzik298]

Why not just do a continuous run of the cable? Can you not do any curves or bends with the product? Just curious? Thx, love you guys and the channel! 😎👍

[@kurta2372]

What is the matte finish on the Douglas fir? Clear or what color stain?

[@parrot1221]

Wait didnt you just close that deck in? I am confused

[@emilechap8573]

Thx for the video.All your video’s are great to watch. Very informative and educational.👍

[@dirkbanzhaf234]

I wonder how long this new plastic boards are lasting in rough weatherconditions. I think the sun iš the most problem.

[@davidd8435]

Turned out great,👌

[@leo959]

Your music selection is great

[@express4863]

@PerkinsBuilderBrothers - Question on that deck boards. I know that a lot of manufactured decking gets super hot in direct sunlight. Does this stuff also have the same issue? Or is it better due to it being hollow?

[@DarkSeraph351]

I keep a big rubber eraser in my pocket when I'm sanding for clearing clogged paper.

[@thelosian]

Brother what is that deck railing? I'm redoing my deck now

[@travisfisher594]

Howdy, from J. Creek. Beautiful work!👍🏻👊🏻

[@tobykathan8277]

Are you just living with the open ends on the 45 deg part of the deck? Benefits of being your own client.

[@UncleChester]

Pro tip..... When shimming your posts use pennies instead of washers. They are water and rust proof and only cost 1¢ each

[@marcelosantana9311]

Best part, washer that are never affected by inflation. 😂

[@JayLouieDragon]

Long version or condensed version, new upload or re-upload -- I don't care, I'll watch these videos as they come... I love the tip-sharing part intended for inexperienced guys like me... avoiding mistakes in the future DIY projects. Thanks PerkinsBrotherBuilders 👍✌️

[@PerkinsBuilderBrothers]

thanks!!!!!

[@bub5264]

Where do you find the music you put in these videos?

[@jbridgemiii]

Some of your deck boards were cut at an angle at the ends.. I would have liked to see how you closed up the ends of those deck boards.

[@stevehamilton9418]

Beautiful work!

[@EyesKhold]

Reupload? I remember watching this before.

[@mamtapancholi36]

Where Dis you got this decking Boards?

[@Fly-SanDiego]

Waterproof deck take two. Action!

[@jesstill7833]

Very nice job ,you have a good crew

[@tracymankey9314]

Beautiful

[@AmericanGiGi55]

I like the all in 1 condenced refresh jobs!

[@eranminhar]

Is this a repost? Or have you rebuilt the entire deck all over again?

[@Bills_Bicycle_Rides]

My Dewalt angle tool is yellow with black letters...

[@richardwhitelock7779]

You missed the end caps to the decking you can see that from your lawn .

[@PositiveEmo]

I thiught i was going crazy thinking i already saw this video.

[@RicardoJunqueira]

Is this a reupload?

[@95thousandroses]

bet this was reposted because of the barrage of comments on the most recent project. I sure have my doubts. Eric's idea of using closed cell spray foam as an "extra later of protection" on the underside of the deck seems scetchy AF. But its his house and if things go south then its his business. Hopefully they don't spend a lot of time on the interior finishes because it may need to be gutted in the near future.

[@kitaecastz4469]

Isn't this an old video reuploaded? Nonetheless still great video! Keep up the good work!

[@smarthome2660]

Kind of weird to see this happening after watching the framing already done below last week.