Complicated Mold Process Made Easy Using Dragon Skin™ and Mold Star™ Silicone

[@zavellart]

I've never seen that bubble shim technique before, that's brilliant!

[@smoothon]

Thank you for watching! Don't forget to subscribe!

[@malakainibos6693]

Amasing

[@nutxyb]

Amazing video, thanks for the tips! :D

[@yoopermann7942]

that was cool,, thank you for the tips

[@smoothon]

Thanks for watching!

[@RadekTupySazava]

Amazing!! Thank You!

[@smoothon]

Thank you for watching! Don't forget to subscribe!

[@user-el7of3cz9g]

Great video. Is there more information available on the other techniques to deal with a free standing characters legs - Milo mentions that there are other ways to deal with free standing legs. Is there a video with more techniques for this issue? Thanks!

[@smoothon]

There are some good tips here: kzbin.info/www/bejne/nHO2pHWhoKqHfas

[@aprilsteel9466]

I have a need to make a yellow turn indicator lens for a caravan . It is a curved piece and has been glued to the original red lens at manufacture . Its also glued to a white plastic backing shroud and can only be moulded from one side . Is there any way I can make this ? atm I made a mould of just the outside of the lens mixed and poured yellow epoxy and just kept swirling it around until it set enough not to flow back with gravity. t was not very successful. Any suggestions appreciated.

[@smoothon]

Hi there! This is a good question for our tech support team, can you send them a ticket here? www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!

[@shawndoyle6460]

Can this Dragon Skin be used to make a mold for Hydrocal Plaster.. Thanks!

[@smoothon]

Yes it can!

[@sharonkeef0522]

How can u thicken silicone

[@smoothon]

You can use our Thi-Vex silicone thickener.

[@Cougar139tweak]

Can you Use Dragon Skin 10NV (Mold) with Dragon skin 10NV (cast model) without CURE INHIBITION??? I hear Dragonskin 10NV does not work as a mold with other silicones...

[@smoothon]

That is correct. Per the technical bulletin, do not cast other tin or platinum based silicones into molds made with Dragon Skin™ 10NV. They are not compatible and inhibition will result.

[@rsanchez948]

Are the gloves vinyl? Vinyl does not inhibit with platinum silicone?

[@smoothon]

Vinyl gloves are recommended. They do not inhibit silicone.

[@guillemoreno8028]

donde puedo conseguir el plastico de burbuja que utiliza para la division

[@smoothon]

Contact Reynolds Advanced Materials at www.reynoldsam.com

[@guillemoreno8028]

@@smoothon soy de España

[@thunter1005]

how do you get all the clay off

[@smoothon]

It can be removed by peeling away, and residue can be removed with alcohol.