Configure an IP address for Allen-Bradley® I/O EtherNet/IP™ adapters

This video demonstrates how to configure the IP address for a POINT I/O™ EtherNet/IP™ adapter. You can set the IP address by using the network address thumbwheel on the adapter manually or by using the BootP-DHCP EtherNet/IP Tool.
Learn more about POINT I/O™ modules at rok.auto/3GmLf3o

[@ВиталийСавенок-ш3щ]

Ok, Fine. But how can I change the IP address for a different subnet?

[@ciucui5621]

Hi! I have 999 set on io with 192 168.40.zz ip set with bootp dhcp tool , dhcp disable. Comm ok with plc, BUT after power cycle on point io, this ip is go again to default. Is a 1734-aentr c rev 7.011 How can i keep my ip in device?

[@zawmyinttun7698]

same happend to me , have you got any solutions ?

[@omkardeshmukh1963]

What to do if communication error is occurring Like unable to service DHCP request

[@davidr5944]

If you are referring to when you try to disable DCHP. I had same error I opened rslinx classic gateway, and was able to set IP to static from there.

[@jimmylesmes2513]

buena tarde, donde lo podría ver en español gracias

[@VanDeVu-c9n]

It really helps. Thanks

[@SafeAndEffectiveTheySaid]

Thank you

[@felixfebres6931]

Awesome!

[@malcolmandthebends2914]

Thanks!!°

[@arjunjayswal6347]

Thank you very much sirji