Connect and Control Tuya / Smart Life Device using Node-RED (BARDI Smart Home)

[@Duty3030]

Straight from Brazil, I followed the tutorial on home automation devices. Despite its complexity, I achieved success. The most challenging aspect was the server configuration; I had to make alterations to ensure success!

[@YaserAliHusen]

Hi, thank you for your information. Some comments said they failed to connect devices. Actually I didnt use it long time ago, and I forgot the details. Can you share what is your modification to make it work?

[@Duty3030]

@@YaserAliHusen I basically followed the video, and when reading the QR code, it displayed a 'no permission' message. I changed these 2 parameters, and it worked: 'Development Method: custom', in 'data center: Western America Data Center'.

[@jimenezjuanandres]

@@Duty3030Correctly, I made those changes too. Hello sir, let me make you another question. You could modify device permission? Cause' I wanna ensure the use complety of a device but I can only read data. Hope u can help me. Thank u so much

[@elinxsTB]

@@Duty3030 Same problem, same solution! Thx!

[@berndmuller4328]

Top content, would have taken me hours to figure out this by myself. Thank You

[@YaserAliHusen]

Thank you

[@biro3000]

hi, is it possible to control a tuya (sub)device which is connected through a tuya zigbee gateway with this node? if yes can you post an example? i tried but no luck so far.

[@marcinooooo]

Thank you for an amazing video! Can you help me and tell me how to query energy data from the smart plug??

[@erderehan_re2e_an185]

hi i can't link to tuya. after scan barcode, the page link tuya app account not appear.

[@vu2cpl]

Hi Yaser, Thanks for the tutorial. I am not getting read write and manage permission option when I add devices. Any idea? TIA

[@jimenezjuanandres]

So do I, maybe is manufacturer condition

[@turbolenco]

Thanks from Italy, i followed your instruction, but i cant give read/write access, by linking the tuya app account the Device Permission is not present. Any idea what i can do?

[@maxr389]

Hi Yaser, your method works perfectly!!!! Great! ... I sometimes head problems to follow the video as its very fast and some things are hard to follow....

[@YaserAliHusen]

Sorry for your inconvinient, For detail you can search on google or Tuya website

[@eyadadel1959]

Hi yaser Always you have something special thanks a lot for your efforts. I need your support to help me with integration of bacnet/ip device to tuya app i have installed home assistant on raspberry pi then I installed node-red as add-on So can i use tuya cloud api node to achieve such integration

[@martellada]

thanks... great video. I have copied correctly the devId and local key from my Tuya Portal but for some reasons when I configure everything in node-red as you did, it is not able to connect. Find() timed out is the message I have got.... have someone had the same issue and in case how has fixed it? thanks

[@Goalvaro2]

i have the same problem

[@xan77]

from minute 2:40, from the API explorer, the site no longer looks like the clip and I can't continue

[@YaserAliHusen]

Thanks for pointing that out! The Tuya API explorer interface might have changed since I recorded the video. I recommend checking Tuya's latest documentation or exploring their new developer portal. Sometimes updates modify the layout or functionality, but the core steps should remain similar

[@damirsvegovic716]

hi...In node red, do I need to put deviceVirtualID ? where I can find it ?....As you said, device key in node red is local key at Tuya platform..what about deviceVirtualID

[@YaserAliHusen]

Did you watch it until end? Find out at 04:58

[@damirsvegovic716]

@@YaserAliHusen yes, but without success...can i contact you through email ?

[@ivaylomanolov1455]

Good job! Thanks a lot!

[@ShikataJanai]

pak untuk produk Smart Door Lock Home Cirlo Handle C7 Lite V 2.0 [Black] Mortise 5050 [Tuya SmartLife] New Version bisa pake cara ini gk?

[@YaserAliHusen]

Mohon maaf, saya belum pernah coba. Secara logika jika device terkoneksi ke internet harusnya bisa diremote berbagai macam cara

[@jongmedellin4890]

can this be done on cloud remotely

[@YaserAliHusen]

using Tuya web application

[@jongmedellin4890]

@@YaserAliHusen can assist us using API.. we are very much interested on this project

[@puzzlefactorysoundstudios]

Thanks Yaser. I can only get an error, despite the device ID and local_key entered correctly. Error message is "An error had occured : find() timed out. Is the device powered on and the ID or IP correct?" Any ideas?

[@TheRoyMonZ]

i seem to have the same issue, 2 suggestions, have you check that the device has change permissions? and if your using the examples, it needs to be dps 1 not 20 that fixed my issues, had to start over a couple of times to get it

[@MiftachHidayatullah]

Thankyou atas sharingnya Pak Yaser, btw kalau untuk add device harus manual dari dashboard tuya nya kah? atau bisa dengan API pak ? Misalkan case nya sudah connect akun tuya, lalu device nya tiba-tiba offline dan tidak ada di list device yang online/offline.

[@YaserAliHusen]

Terima kasih sudah menonton, Mohon maaf saya tidak bisa menjawab pertanyaanya. Karena eksperimen ini sudah lama, dan saya tidak menggunakannya dalam waktu yang lama. Dan sekarang sudah tidak menggunakannya lagi 🙏 Mungkin bisa dilihat di website developernya, mungkin ada API yang bisa digunakan

[@Alsacedrone]

thank you it's working

[@YaserAliHusen]

Congrats! I don't know, some comments said it's not working Do you know what is the problem?

[@SidYoung-au]

Apart from my zigbee hub and 1 WiFi Socket, all my devices have a blank local_key. When I use the Wifi socket deviceId and key I cannot connect.. any ideas?

[@YaserAliHusen]

Hi, I am sorry It has been a while since I last used this, I'm sorry I couldn't be of much help

[@sami150180]

Great video. Is there any to pay to Tuya Plataform??? Thanks for the information!!!

[@YaserAliHusen]

When I was creating this video, there is no payment regulation.

[@FOATE]

Thx Yaser!!

[@jesuscantoscampayo1151]

Thanks for the turorial, but I have followed your steps and it doesn't leave me the options to be able to put it read/write. I have deleted everything several times and done it again and I always get to the same situation.

[@YaserAliHusen]

I apologize for the inconvenience. Actually, I no longer use it. Perhaps there was a misunderstanding on my part or there has been a change in the process. You may try searching for it on Google. If successful, please kindly inform in the comments here so that others can be informed. Thank you

[@jesuscantoscampayo1151]

@@YaserAliHusen I think something has changed in tuya and it does not allow it to be done, the control cannot be carried out, but I do receive information in Ihost + Node Red. But to receive the data I have to enter and refresh the smart life app. something very strange

[@BachKhoanamcuoi]

I get problem like you. How can fix this?

[@albertvila2091]

Same problem... couldn´t get my node to connect to the device and the only difference I can find it that my devices are also showing a read only. Couldn´t figure out how to change it to read and write.

[@ighost_1337]

local control or cloud ?

[@YaserAliHusen]

Cloud

[@bimadwipriyasetiawan1133]

sebelumnya terimakasih atas tutorial yang diberikan Pak Yaser, izin bertanya saya ada kedala pada bagian access qr account tuya dengan email yang sama pada tuya cloud iot dengan tuya mobile apps nya, namun masih ada keterangan no access. apakah bisa dibantu itu karena apa ya Pak? Terimakasih

[@YaserAliHusen]

Terima kasih, Mungkin coba ganti data centernya. Mohon maaf karena sudah lama, saya juga kadang lupa.😢

[@ronaltama]

dapat kendala yg sama mas , skrng udh ketemu solusinya mas?

[@AyiMahmudin]

Saya mencoba, diluar jaringan yang terhubung dengan Tuya device tidak bisa. Harus jaringan local

[@YaserAliHusen]

Dengan jaringan local bisa kah? Mohon maaf, saya sudah tidak menggunakan lagi

[@Nutzeruser89]

Doesn’t work with Tuya Security Camera

[@YaserAliHusen]

Thanks for your feedback

[@TalismancerM]

Linking to smartlife china data center: "No access"...*sigh*

[@MiloudTair]

idem i think to have to swtich tuya application..

[@TalismancerM]

@@MiloudTair hi...I did manage to fix this by using the EU Central data centre

[@EngGuiLinhares]

Looks like this is an incomplete tutorial so far. Where are the device IP configuration ?

[@YaserAliHusen]

No need IP configuration

[@j7v7a2]

FYI, if your Trial has expired, you wont't get the required information. No permissions. Your subscription to cloud development plan has expired.

[@YaserAliHusen]

Thank you for your information. 👍

[@j7v7a2]

@@YaserAliHusen I enjoyed the video, it was helpful when my account was still part of the trial.

[@xazii]

@@j7v7a2 is it not possible to use the basic api anymore after the free tiral expires or have you found a way?

[@javierlindenthal6680]

Super complicated, better throw tuya in bin

[@soovui]

Hi Yaser, very great of you.. I like to watch yr video, especially using nodered. I find that u r very clever and helpful. I like you to help teach on how to make heatmap on an office floor layout map to show occupancy via a motion sensor detection. With date and time you can find out which area on the heatmap display most busy area. Here is the link for yr reference kzbin.info/www/bejne/hnu8pXxverKtZ6M&feature=share

[@YaserAliHusen]

Thank you