Connect SONY ZV-E10 to DJI RONIN SC │ USB Connection Issue FIX │ Ronin SC Active Tracking

[@classzedits]

if you are getting RSS port connection error when trying active tracking, that's because probably your camera setting is set to mobile phone app connection (sony imaging edge). turn off mobile phone connection and then turn on pc remote and pc remote connection method to usb

[@iamsmartjoseph]

Thank you so much. I just got the RSC2 gimbal with Sony zv-e10, and this step by step video guide was a life saver

[@classzedits]

i am thrilled that it also worked on your end. others are having technical issues so i'll still gonna need to figure out what's the problem so i could help them out. happy filming.

[@passionparadise2062]

Thank you sooooo much! DJI showed the PC remote function under a different menu in their tutorial, and I was freaking out afraid I wouldn't be able to use this gimbal! Fortunately this video is for my exact camera! Thank you!

[@classzedits]

i'm glad we have the same menu layout... it's more enjoyable to use a gimbal if it works together and directly with the camera... not just balance the camera as a separate object.

[@cg_eye]

I never seen a KZbin TEACHER like u ❤

[@classzedits]

thank you for appreciating. big moral boost especially in this struggling time as a content creator.

[@techtopstar]

My ronin Sc gimbal not working recording button with sony zv e10.😥

[@_NeiDy]

Same problem

[@diegolfwii]

Have you already fix it? I'm with the same problem, I'm going to try updating the firmware but don't know if gonna work

[@Mdeman12]

@classzedits Mr, thank you so much for this amazing video I followed the method and it gives me an indication on the screen that it is connected to the gimbal , but I cannot control the shooting through the gimbal buttons as if they are two separate pieces. Can you help me

[@classzedits]

how about the camera settings? for the gimbal, all needed is to connect it to the camera with the correct cable. everything else is in the camera (settings). or if you covered the settings, perhaps the camera is already turned on before you switch on the gimbal. it's important that the gimbal is switch on first, before the zv e10.

[@louistravel2486]

@@classzedits Hey ! i have a problem. i try to connected my ZV E 10 (FIRMWARE UPDATE OK) and i have a black screen, and if i switch the usb c connection my screen works but the records switch dont work. I use a RONIN WIRE USB C/ USB C... can u help me ? First i turn ON the RONIN, and second i turn on the camera. I never have this problem with my A7 III sorry for my bad english TY

[@SuccessReset]

Thank you ❤ it most definitely worked

[@classzedits]

so, glad it worked on your end. others are having difficulty. thanks.

[@stokefl]

Just bought this setup and followed everything accordingly as well as a few others threads on the internet… Should I just send back my Ronin SC? Seemingly nothing will work

[@classzedits]

thanks for reaching out. did you received any error message? others were able to make it worked on their end. if the gimbal is working, perhaps you missed a step or two. please give more details so i could figure out the possible prob from my end. thanks.

[@TomMeny]

Thank you very much! Works the same way with the RSC2 apparently.

[@classzedits]

great. glad it also worked for you. 🙂 thanks...

[@antonioguedes6903]

You saved my life once again! Your videos are great!

[@classzedits]

i am so happy when you said "again". although i don't know when and with what video was the first time, i'm still glad i was able to provide some help. God speed and happy filming.

[@gilianfranciscogamla7280]

Thanks! I'm completely newbie and you saved me S2

[@classzedits]

Glad I could help... i learned it from someone else too... it's just right to share it so that everyone will have more fun using our ronin sc...

[@JochyTV]

Thanks amigo. Just got that set up.

[@classzedits]

nice. and thank you for appreciating. happy holidays...

[@brandonbyram]

I thought it would be helpful to mention make sure all firmware is updated. I tried this at first and it didn't work then updated the DJI firmware and it started working.

[@classzedits]

thanks. yes, you're absolutely right. always make sure firmware is up to date.

[@rawtothislifestlye77]

Question? Will I still be able to use my monitor I have connected to the camera while this is plugged in ?

[@organiccardboard]

Thanks so much, this was very helpful!

[@classzedits]

glad being able to share something helpful. happy filming with your setup.

[@hemantkumarsahu7097]

Camera model Sony zv e10 or gimbal roneliness connect nahi ho raha hai jo aapane settings bataye the kya

[@jontv6390]

Ayos Pare Ko!! Thanks for the help

[@classzedits]

thank you din po... share share lng nmn tyo ng ideas pr makatulong 😁

[@MldBaul]

Good work

[@classzedits]

Thank you so much 😀

[@Mheramb]

Nice video. Difficult to find people with experience with specific gimbals. I've got my hands on a Feiyutech AK2000S gimbal for my Sony ZV-E10 camera. I can't seem to get the camera to recognize the gimbal. In Feiyutechs official video the camera just instantly connects to the gimbal. I've tried following the steps in this video, also trying to turn on the gimbal first before the camera, but I can't seem to get it to function. The Sony ZV-E10 is on the compatibility list on the Feiyutech AK2000S, so it should work. I can't seem to find much info on ppl with the AK2000S gimbal and the ZV-E10 :/

[@classzedits]

hi. currently can't answer that especially i only have ronin sc. but i'll try to find a solution for that issue with feiyutech + gimbal. can't promise but i'll do my best.

[@nour_eddin_eid]

Hello Mr, thank you so much for this amazing video I followed the method and it gives me an indication on the screen that it is connected to the gimbal , but I cannot control the shooting through the gimbal buttons as if they are two separate pieces. Can you help me

[@classzedits]

hello, friend. thanks for dropping by my simple channel. by the way, i'm still learning how to improve my talking head videos. as for your concern, i am not sure if you were able to connect your camera to the gimbal through the cable? did you made sure you turned off any settings that are for wireless connections? did you setup your camera for usb and for "connect to pc"?

[@sonyramirez7087]

Hey, thanks for the tutorial, very clear. I am still having issues and camera does not connect, should de cables be the original ones ? I purchase one used and brought the multiusb but not usb c cable, used 3 at had at home and no results.

[@classzedits]

not sure at this point since i only have cables that came with the gimbal. but i searched online for similar issues, and it seems like, yes, the guys said it only worked after buying another cable from dji. someone also said he/she took apart the original broken cable and found 6 cores (standard 4 cores for usb-c) and said that could be the difference.

[@sreejarathish]

Thanks for the video. May I know Which quick release plate are you using..

[@classzedits]

hello, brother... it's manfrotto. but this was my first quick release plate, so, currently, i would suggest better go for any other model or brand that is smaller and more compact.

[@Gymandglamour.photography]

Thanks

[@classzedits]

i'm glad it worked on your end. i don't understand how it didn't for the others.

[@ImagemCiaCinematografia]

Very good. Congratulation

[@classzedits]

salamuch to you, my ever so gorgeous supportive wifey o' mine... i love you... mmmmwaaah...

[@user-vt5kr3fg6f]

Excellent thanks

[@classzedits]

you're very much welcome. just sharing what i can share to help fellow zv e10 or ronin sc users.

[@nihguoyou-y9317]

thx for sharing that. appreciate that.

[@classzedits]

thanks for appreciating. sharing ideas is caring for fellow hobbyist.

[@shakilsinha7993]

Hi there! thanks for the video. Just a quick question, does Ronin SC support sony zve10 with sigma 18-50mm lens?

[@classzedits]

i apologize for the late response because i'm a teacher and i'm having great difficulty with my schedules. i am currently not even able to make new vids nowadays. but to answer your question: no problem with whatever lens you've got. the connection is between the camera and the gimbal. however, if you'll gonna ask if you will be able to control the zoom from the gimbal, the basic ronin sc setup doesn't have that feature built-in. you'll need to purchase thar separate zoom dial you will fix on one side of the gimbal to be able to control lens zoom. and also, it will only work with power zoom lenses.

[@Fioreal]

It worked!!!!! Thank you!!

[@classzedits]

i'm glad it worked for you. if you're a fellow sony zv e10, welcome to the family of sony zv e10 users (and ronin sc).

[@trungtinaotao3005]

thanks so much

[@classzedits]

thanks for dropping by my simple channel. i hope it actually worked on your end.

[@TOSCANAMARBLES]

This is not working for me Please tell me the reason😢

[@classzedits]

hi, there. thanks for reaching out. did you received any error message and what was it? others were able to make it work on their end. so, i'm guessing you got an error message. was it about RSS? or perhaps you missed a step or two? more details will help me figure out the possible prob. thanks.

[@danteguerero5915]

Thank u sir z.

[@classzedits]

salamuch din po, sir, for dropping by...

[@josua2517]

Thanks , worked !!!

[@classzedits]

Great... i'm not sure why others are not able to do the same, but i'm glad it worked for you too... if you learned other stuff too related to using our ronin sc, please do share so i could learn from you too... God speed and happy holidays...

[@r2backsoon858]

Thanks ❤

[@chitransh1537]

Sir, in video bottom connecting plate fitted with your ZV E10 comes with gimbal box or need to purchase separate, I am from India and planning to purchase RSC for my ZV E10, pls reply

[@classzedits]

hello, CHITRANSH... thanks for dropping by. what you saw attached under my ZV E10 is a 323 adapter plate that comes with the Manfrotto 200PL-14 plate mount that I fixed to the Ronin SC's quick release plate. They are different products to get, but you can buy the plate and mount as a set.

[@500abarth7]

Thank you so much.

[@classzedits]

im glad it helps.... thank you too for dropping by....

[@500abarth7]

@Sir ZTv - Let's Make Videos please fallow our little family Channel ( Troy&Us ) thank you.

[@ghumojaipur]

I purchased camera when I connected it with gimbal and the screen fluctuating between file sharing to pc but after this video that thing resolved but recoding button not working and when usb connected the buttons like recoding and menu are not working please help

[@VictorEdemSetordjie]

have the same issue. found any solution?

[@classzedits]

i'll gonna try the same steps to see if i'll encounter any problem like yours next time. maybe you need to update the gimbal's software, but not sure. i'll be back once i figured out what's wrong.

[@tamilshortfilm6070]

Super sir

[@classzedits]

thanks...

[@MEDAFamilyFilms]

Can you control the lens zoom or focus via the gimbal?

[@classzedits]

hi... i sincerely apologize for not able to check your message immediately. i only got the basic gimbal set... for that you will need to get the complete set that includes the focus wheel.

[@diaridorchidee]

Wow it works 🎉thank you so much!

[@classzedits]

@@diaridorchidee i'm glad it did on your end. i'm not sure why others aren't lucky, but technically zv e10 is not included in the compatible camera list of dji for ronin sc, and up to now they have not made any updates for ronin sc firmware.

[@jeffstevenson9406]

@@diaridorchidee You were able to get the focus wheel to work with Ronin-SC, Focus Wheel, and ZV-E10?

[@diaridorchidee]

@@jeffstevenson9406 hello yes I confirm I can manage the focus from usb c connection, here my settings on the Zve10 Connection to smartphone disabled Connection to pc enabled Control method USB The settings on Ronin from the menu front dial I choose the option zoom/focus (actually I never tried to use the zoom lens because I have a pretty heavy one and usually just use my prime lenses on Ronin). For the cable setting I followed the instructions in the video. I hope it can be of help.

[@cannabisheute]

love it

[@classzedits]

thank you so much for appreciating. obviously im not a professional but i love learning these kind of stuff.

[@MrMoppedJunkie]

Got the Zv e10 and the Ronin S Gimbal. Every settings done as shown in the video. First gimbal than camera turned on. No connection. Pls help me

[@classzedits]

sorry to hear that. i don't know if it's the same for ronin s (i have ronin sc). but i think it should work since we're using the same camera. i'll try to recreate the tutorial with another video to see if i'll be able to make it work again next time i try.

[@Collants]

muchas gracias!

[@classzedits]

all the same, thank you for appreciating 😊😊😁

[@PROMOTIONFilM647]

optie op de camera Bluetooth afstandsbediening van de kimble moet aanstaan 😁😁😁😁

[@classzedits]

Hallo. Heel erg bedankt voor je reactie. Is het een vraag, of is het een aanbeveling? Bedankt.

[@phoeberobinson8887]

Do you know why the camera screen would go blank after turning on the camera after the gimbal? All the settings and connections are the same as the video, but still no luck! ☹️🤞

[@classzedits]

the ronin sc should work as a computer for the camera, so, i guess we can troubleshoot it the same way when the camera displays black when connected to a regular computer. crossing my fingers as well because i haven't encountered this from my end: *Turn off camera, wait for 30 seconds and then turn it back on. *Check the USB Connection settings... if Auto didn't work, try MTP. *Turn both camera and gimbal off, re-switch them back on gimbal first then the camera.

[@revoover]

Hello, could you please tell me if the Ronin gives power to the camera while in use?

[@classzedits]

hi... i appreciate you so much for dropping by. for your question, actually no. the cord is only for controlling the camera using the gimbal.

[@flaviomotafilmagemefotogra6242]

Tenho uma a6300 ao ligar o. Abo do ronin sc aparece na tela check the conected device Alguém pode me ajudar Já teve esse problema?

[@ShobaSadler]

between the ronin SC and the Ronin sc2 which is better for the Sony zv e10 please?

[@classzedits]

hi... if you're looking for an all around gimbal both for your zve10 and probably your dslr, sc2 is the better choice. also, sc2 is more ergonomically designed since sc was the first for mirrorless, that is why sc2 is the more improved verson as far as confort in use is concerned.

[@L5299Photography]

Did you find balancing with the zv e10 easy with this? Thanks

[@classzedits]

sure did, sir. zv e10 is great with this ronin sc... even if you add manfrotto quick release or any quick release system which i strongly recommend if you also use tripod for the same camera 👍😊

[@dwijenchatterjee654]

I fade up with connect cable. failure. As ur video did this but not working rec. bottom in gimbal ronin sc. There is no USB streaming mode from * (star) menu (u shows in 2:32 minute) at last in my camera. is there needed any software update in my camera zve10? pl. suggest what i have to do?

[@classzedits]

hi... the Star menu is my custom menu... you add your own selections in there. are you also using Sony ZV-E10? here are what you need to make sure... (1) don't connect the camera yet... do these first: (1.1) go to third tab, page 1/2 - Network1, turn OFF "Smartphone Connect", and then (1.2) on the same page - Network1 page 1/2 - go to "PC Remote Function"... switch "PC Remote" ON... and (1.3) change "PC Remote Cnct Method" to USB... go back to main menu. (2) Go to fifth tab and to Setup3, page 3/5 > Set "USB Connection" to AUTO. you are now all set, BUT... POWER OFF THE CAMERA NOW. (3) Make sure both gimbal and camera are OFF. (4) Connect the gimbal to the camera using the correct cable - both Type C ends and one is at 90 degree angle... connect the angled end to the gimbal... connect the straight end to the camera. (5) POWER ON THE GIMBAL FIRST... so that it will prepare itself to read connected camera later on. (6) POWER ON THE CAMERA LAST.... That's it. I hope this will help.

[@ZielonyA1]

I had the same problem - the solution was to update the firmware of Ronin SC (via smartphone). After that the rec button works.

[@hemantkumarsahu7097]

Jo aapane settings bataya tha vah maine kar

[@TheMIPL]

When I set that all up, my cam doesn't output a hdmi picture, is there a fix for this problem? In my case it's usb or hdmi, not both at the same time

[@classzedits]

thanks for reaching out. just to make sure i got you right (but if not, please give more details to help me figure the prob from my end): you set up your zv-e10 with this gimbal, and used the gimbal's record button to shoot pictures? Or... you want your zv-e10 to work as a webcam for your computer using HDMI? please give more details, and i'll do my best to assist. thanks.

[@TheMIPL]

@@classzedits I'm trying to use my zv-e10 with the gimbal but with an external display mounted to the side of the gimbal. When I'm connecting the USB to control the camera I have a black screen on the external screen, when I'm disconnecting the USB cable I can't control the Camera but the screen works normal

[@hemantkumarsahu7097]

Hindi mein jankari dijiye camera Sony zv e10 Ronin SC cable connect nahin ho raha hai jo aapane settings bataye the

[@Gymandglamour.photography]

Is there anyway we can control the zoom via dji

[@classzedits]

with the basic setup purchased, the answer is no. you'll need to buy the zoom dial thing separately, and that thing will also only work if you're using a power zoom lens.

[@kenjaboneta309]

Sir question po.. yung nabili ko po kasing ronin sc is 2nd hand.. yung cord na dala niya is only type c to multi cam na micro.. saan po ba pwede bumili ng type c to type c na cable po for ronin..

[@classzedits]

hirap nyan, paps. kc kung original hanap mo not sure kung may original parts na mabibili separately from actual dji store (searching ako ngayon online pero so far wala from actual dji). siguro try mo third party basta data cable sya.

[@thepromiser899]

Didn’t work for me. Could it be my cable? It’s type C on both ends

[@classzedits]

how about the settings on the camera? also, DJI clearly instructed that you turn the gimbal on first, then the camera. if the cam is already turned on before the gimbal, it will not work.

[@tamilshortfilm6070]

Dji ronin sc are support Nikon d3400 camera?

[@classzedits]

hi. nikon d3400 is a dslr... ronin sc is for mirrorless cameras. if the weight of d3400 is still within the maximum, you can use ronin sc as stabilizer... but for the remote control features, so far based on the list from DJI, it supports Nikon Z6 and Z7.

[@alessandropaglietti778]

🙏 grazie

[@classzedits]

more thanks to you, sir. happy filming with your gimbal-camera setup.

[@iqbal1618]

Can we connect other type c cable will it support

[@classzedits]

im not sure if it will work. i haven't tried using a different brand of cable with my sc. but i guess if it's a type c port, any type c might work. but again, haven't tried that yet.

[@hemantkumarsahu7097]

Camera Sony Z10 Ronin SC cable connect nahi ho raha hai jo aapane setting se bataye the kya

[@classzedits]

here are what you need to make sure... (1) don't connect the camera yet... do these first: (1.1) go to third tab, page 1/2 - Network1, turn OFF "Smartphone Connect", and then (1.2) on the same page - Network1 page 1/2 - go to "PC Remote Function"... switch "PC Remote" ON... and (1.3) change "PC Remote Cnct Method" to USB... go back to main menu. (2) Go to fifth tab and to Setup3, page 3/5 > Set "USB Connection" to AUTO. you are now all set, BUT... POWER OFF THE CAMERA NOW. (3) Make sure both gimbal and camera are OFF. (4) Connect the gimbal to the camera using the correct cable - both Type C ends and one is at 90 degree angle... connect the angled end to the gimbal... connect the straight end to the camera. (5) POWER ON THE GIMBAL FIRST... so that it will prepare itself to read connected camera later on. (6) POWER ON THE CAMERA LAST.... That's it. I hope this will help.

[@colestern2608]

Clutch bro

[@donrichardsgenerato5501]

sir Z gud day po. pag mggamit ng cellphone, pede buh magamit ang cable c para magamit record button ng ronin gamit ang cellphone?

[@classzedits]

hello, don. kung cellphone gagamitin mo as camera (tulad sa isang video ko), hindi pwede kc hindi sya (cp) identified as compatible camera ni ronin. and also ise-set mo pa sa camera yung PC Remote, na wala sa camera app ng cp. so, kumbaga pang-stabilize lang si ronin sc nun pag cp ang camera (no direct connection for control).

[@AnilSharmajmu]

sir my cameera is not responding after doing all the settings accoring to you

[@classzedits]

i'll re-create this tutorial to see if i'll also gonna encounter the same problem next time i try it.

[@hiruvision4411]

Sir my moza Air cross 2 not contact to zve10, plz sulv sir

[@classzedits]

hello, brother. it seems like moza air cross 2 series is not yet supporting or compatible with zv e10. the currently latest compatible sony camera is still the zv1. but anyway, as for connecting a compatible camera to moza air cross 2 gimbal... connect the multi-c to type c usb cable to the gimbal (port somewhere on the tilt arm/motor) while the type c end goes to the camera. once connected, (1) power the gimbal... (2) press and hold the red record button... (3) press the round wheel to the right 2 times to go to shutter cable on the menu... (4) select in the menu under shutter cable the type of cable you're using. (5) you're good to go. but then again (that is for sony compatible cameras). NEXT... on the camera menu... (1) turn off "Control with smartphone." (2) set "USB connection" to "computer remote control".

[@jelzulueta471]

❤❤❤

[@hemantkumarsahu7097]

Jo aapane settings bataya tha vah karke dekh liya fir bhi Keval connect nahin ho raha

[@justd2K]

I did the exact Same Thing Like U mentioned.... Still my cam says"cannot recognize the UB cable"😩

[@classzedits]

hi, there. first and foremost, thank you so much for dropping by. for now i can't think of any possible reason. should have worked if zv e10 was set for pr remote and all other connection like smartphone are turned off, you used the correct cable (the short one with type c on both ends and one end is angled at 90 degrees). ill see what i can find out about this error. thanks again sincerely.

[@classzedits]

i have someone commented that they were able to get it to work after getting an error. maybe... just maybe... updating ronin will help. i hope it will. do come back so we could help others as well with the same issue. thank you so much 😊

[@justd2K]

@@classzedits i figured it Out! Its an issue how you Plug the Cable in! The orrientation of the cable seems to be important! So If u get the Error Just Turn arround the cable and IT works🤷🏼‍♂️😅

[@Leonistech]

@@justd2K noo waaayyy lol i cant belive it worked

[@justd2K]

@@Leonistech strange but yeah XD

[@klickplaytv]

bakit hindi hindi po gumagana yung FOCUS WHEEL sa SONY ZV-E10

[@classzedits]

hello, bro... actually wala pa talaga si zve10 sa compatible cameras ni ronin sc... sa actual list nasa Sony A series palang. pero try mo muna mga to baka umubra: (1) after connecting both camera and gimbal, BE SURE TO POWER ON THE RONIN SC FIRST, before the powering on the camera; (2) make sure the camera is set to PC Remote; (3) kung ang lens is with built in power zoom, set the camera to Optical Zoom... pero kung hindi power zoom ang lens, i-set mo yung camera sa Digital zoom. pati nga lenses may compatibility consideration din kaya malamang hindi gagana sa kit lens. si zve10 yata naipasok lang simula RSC3... RSC2 pababa wala si zve10. And other solution dyan, idagdag mo yung focus motor na ikinakabit sa tabi ni lens mismo. Also... tingnan mo rin baka gumagana naman sa FOCUS, hindi nga lang sa ZOOMING. update kita pag may bagong balita since pareho tayong zve10 user...

[@hemantkumarsahu7097]

Cable connect nahin ho raha hai

[@vitoradriano1742]

LEEEEEEEGEND!

[@classzedits]

thanks for appreciating. just sharing to help fellow zve10 / ronin sc users.

[@hemantkumarsahu7097]

10 20 bar TRAI kar chuka hun fir bhi Keval connect nahin ho raha hai Soni side bhi 10 DJI Ronin SC

[@classzedits]

here are what you need to make sure... (1) don't connect the camera yet... do these first: (1.1) go to third tab, page 1/2 - Network1, turn OFF "Smartphone Connect", and then (1.2) on the same page - Network1 page 1/2 - go to "PC Remote Function"... switch "PC Remote" ON... and (1.3) change "PC Remote Cnct Method" to USB... go back to main menu. (2) Go to fifth tab and to Setup3, page 3/5 > Set "USB Connection" to AUTO. you are now all set, BUT... POWER OFF THE CAMERA NOW. (3) Make sure both gimbal and camera are OFF. (4) Connect the gimbal to the camera using the correct cable - both Type C ends and one is at 90 degree angle... connect the angled end to the gimbal... connect the straight end to the camera. (5) POWER ON THE GIMBAL FIRST... so that it will prepare itself to read connected camera later on. (6) POWER ON THE CAMERA LAST.... That's it. I hope this will help.

[@roshanoffical3314]

Bro still not working plzz help me

[@classzedits]

hello, dude. what error are you getting? or what exactly's not working, so I could figure it out from my end 🙂

[@roshanoffical3314]

Sry now it's ok, because I didn't update so only now it's ok ☺ any way thank you so much ❤

[@classzedits]

hi, roshan. did you mean updating helped? coz someone is also asking about their cable still not recognized.

[@roshanoffical3314]

@@classzedits yeah it helped me bro.

[@maggyrockz]

The red button don’t work :-(((

[@classzedits]

please follow closely the steps. i'll re-create the tutorial soon to see if it will fail too next time i try it.

[@AngtanongniDavid]

Sir ayaw mag connect nang SC to App Ayaw mag connect nang Bluetooth

[@classzedits]

check mo po lahat ng settings procedure or required for the camera as discussed, tapos kung ano ang unang io-on (gimbal or yung camera). also make sure to use the correct cable that came with the gimbal.

[@classzedits]

ahmm... wait. bluetooth po? tethered po tayo sa procedure na to using one of the cables with type c on both ends.

[@naeemalmalek3925]

Thanks

[@classzedits]

same brother. thank you for appreciating. and im glad it also worked on your end.