Connect to MicroLogix with Serial

In this video I show the cable and the required software to connect to a MicroLogix 1100, 1400, or 1500. The Cable is a 1761-CBL-PM02, the Serial to USB converter is a 9300-USBS. You will need RSLinx Classic Lite (or better) and RSLogix 500 which is a licensed software.
At 6:25 I switch the serial cable from the MicroLogix1500 to the MicroLogix1100, that is why Linx lost connection and regained it to a different PLC and I repeated the upload and save procedure.
Hope this helps, let me know in the comments if there is something I can make a video of for you.

[@AlloyedFrequencies]

Thank you so much. The step I missed was auto configure.

[@Rauf1980TR]

Hi, i want to check PLC running software version via pot switch. Could you please explain is it safe to do it? Because with this pot switches, i can change also configuration.Could you please advise? Thanks.

[@shortplcvideos5764]

Rauf, what model PLC are you requesting this for? Thank you for the question.

[@ahmedaljuboori6884]

Hi How can I contact you ?

[@luisavelar9883]

Hey could you help me out?

[@shortplcvideos5764]

I'm not sure, what is your question?

[@luisavelar9883]

@@shortplcvideos5764 if we are changing a plc with extension cards that are 120 AC to a PLC that is 24VDC, how could I use interposing relays to make everything function as it currently sits?

[@luisavelar9883]

@@shortplcvideos5764did my comment send ?

[@eudismendoza1153]

Hello, what cable can you use to connect to Micrologix 1200 PLC?

[@shortplcvideos5764]

Communication Cables Use only the following communication cables with the MicroLogix 1200 controllers. • 1761-CBL-PM02 series C or later • 1761-CBL-HM02 series C or later • 1761-CBL-AM00 series C or later • 1761-CBL-AP00 series C or later • 1761-CBL-PH02 Series A or later • 1761-CBL-AH02 Series A or later • 2707-NC8 series A or later • 2702-NC9 series B or later • 2707-NC10 series B or later • 2707-NC11 series B or later Page 1-4 of this document literature.rockwellautomation.com/idc/groups/literature/documents/um/1762-um001_-en-p.pdf

[@ahmedaljuboori6884]

Hi How can I contact you?

[@shortplcvideos5764]

Just here in the comments is fine. What's up?

[@ahmedaljuboori6884]

I have a plc MicroLogix"1500 Processor Unit SE CAT 1764 - LRP needs updating

[@shortplcvideos5764]

@@ahmedaljuboori6884 If you need to connect to that PLC, you will need this cable: 1761-CBL-AP00 I may be able to get you a pinout of this cable if you want to try to build your own.